BBURAGO Ferrari SF90 Stradale 1:24 Scale Model Kit Instruction Manual

Introduction

Thank you for choosing the BBURAGO Ferrari SF90 Stradale 1:24 Scale Model Kit. This kit allows you to construct a detailed replica of the iconic Ferrari SF90 Stradale supercar. Designed for enthusiasts and collectors, this model provides an engaging assembly experience and results in a high-quality display piece. Please read this manual thoroughly before beginning assembly to ensure a smooth and enjoyable building process.

Коопсуздук маалыматы

• Сунушталган жаш: This model kit is recommended for individuals 14 years and older. It contains small parts that may pose a choking hazard for younger children.
• Чакан бөлүктөр: Keep all small components out of reach of children and pets.
• Курч жээктер: Айрым бөлүктөрүнүн четтери курч болушу мүмкүн. Чогултуу учурунда этияттык менен кармаңыз.
• Adhesives/Paints: If using additional adhesives or paints (not included), ensure proper ventilation and follow the manufacturer's safety instructions for those products.

Пакеттин мазмуну

Before starting, verify that all components are present. The kit should contain:

• Pre-painted die-cast metal body shell
• Plastic parts sprues (e.g., interior, chassis, wheels, engine details)
• Резина шиналар
• Screws and/or small pins for assembly
• Decal sheet (if applicable)
• Instruction sheet/diagrams

If any parts are missing or damaged, please contact BBURAGO customer support.

Чогултуу (Орнотуу)

Follow these general steps for assembling your Ferrari SF90 Stradale model kit. Refer to the included diagrams for specific part identification and placement.

1. Даярдоо: Unpack all components carefully. Identify each part by comparing it with the parts list or diagrams. Prepare a clean, well-lit workspace.
2. Шасси жыйындысы: Begin by attaching the main chassis components. This typically involves securing the base plate, axles, and suspension parts.
3. Ички ассамблея: Assemble the interior components such as seats, dashboard, steering wheel, and any other cockpit details. Secure them to the interior tub.
4. Дөңгөлөк чогултуу: Mount the rubber tires onto the plastic wheel rims. Attach the assembled wheels to the axles on the chassis.
5. Engine/Underbody Details: If your kit includes engine or underbody details, assemble and attach them according to the instructions.
6. Дене тиркемеси: Carefully align the assembled interior and chassis with the pre-painted die-cast body shell. Secure the body to the chassis using the provided screws or clips.
7. Сырткы чоо-жайы: Attach smaller exterior components such as mirrors, headlights, taillights, spoilers, and any other trim pieces.
8. Decal Application (if applicable): If your kit includes decals, carefully cut them out, soak them in water, and slide them onto the designated areas of the model. Gently blot excess water and allow them to dry completely.
9. Акыркы текшерүү: Review your assembled model to ensure all parts are securely attached and correctly aligned.

Image: The fully assembled BBURAGO Ferrari SF90 Stradale 1:24 scale model kit, showcasing its detailed replica features.

Display and Handling (Operating)

• Көрсөтүлүүчү жай: Place your finished model on a stable, flat surface away from direct sunlight, extreme temperatures, and high humidity to prevent damage or fading.
• Колдонуу: Always handle the model by its main body or chassis. Avoid touching delicate parts like mirrors, antennas, or spoilers, as they can break easily.
• Оюнчук эмес: This is a collector's model, not intended for rough play. Repeated handling or impact can cause parts to detach or break.

Техникалык тейлөө

• Тазалоо: To clean your model, gently dust it with a soft, dry brush or a microfiber cloth. For stubborn dust, a slightly damp cloth can be used, but avoid excessive moisture, especially on decals.
• Химиялык заттардан алыс болуңуз: Do not use harsh chemical cleaners, solvents, or abrasive materials, as these can damage the paint finish or plastic components.
• Сактагыч: If storing the model, place it in a protective display case or box to prevent dust accumulation and accidental damage.

Проблемаларды чечүү

• Туура эмес бөлүктөр: If a part does not fit easily, do not force it. Double-check the instruction diagrams to ensure you have the correct part and orientation. Minor trimming with a hobby knife may be necessary for some plastic parts.
• Decals Not Adhering: Ensure the surface is clean and dry. Use a decal setting solution if available, or gently press the decal with a soft cloth to remove air bubbles and ensure full contact.
• Бош бөлүктөрү: If parts become loose after assembly, a small amount of model-specific adhesive can be used to re-secure them.

Техникалык шарттар

Кепилдик жана колдоо

For information regarding warranty, replacement parts, or technical support, please refer to the contact information provided on the product packaging or visit the official BBURAGO webсайт. Ар кандай кепилдик дооматтары үчүн сатып алганыңыздын далилин сактаңыз.