ENGWE X20 Electric Bike User Manual

1. Киришүү

This user manual provides essential information for the safe operation, maintenance, and troubleshooting of your ENGWE X20 Electric Bike. Please read this manual thoroughly before your first ride to ensure proper usage and to maximize the lifespan of your e-bike.

2. Коопсуздук маалыматы

Your safety is paramount. Always wear a helmet and appropriate safety gear. Adhere to all local traffic laws and regulations. Avoid riding in adverse weather conditions or on slippery surfaces.

Жалпы коопсуздук чаралары:

• Ар бир колдонуудан мурун, алдын ала текшерүү жүргүзүңүз.
• Тормоздордун туура иштеп жатканын текшериңиз.
• Шинанын басымын жана абалын текшериңиз.
• 330 фунт максималдуу салмагы сунуш ашпагыла.
• Колдорду жана буттарды кыймылдуу бөлүктөрдөн алыс кармаңыз.
• Do not modify the e-bike's electrical system or components.
• Always turn off the power before performing any maintenance or adjustments.

3. Пакеттин мазмуну

Таңгактан чыгаргандан кийин, бардык компоненттер бар экенин текшериңиз:

• ENGWE X20 Electric Bike (85% pre-assembled)
• Main Battery (48V 14.4Ah)
• Secondary Battery (48V 7.8Ah)
• Батарея заряддагыч
• Two Pedals
• Ээр
• Tool Kit
• Колдонуучунун Колдонмосу (бул документ)

4. Орнотуу жана чогултуу

Your ENGWE X20 Electric Bike arrives 85% pre-assembled. The remaining assembly steps are straightforward and can be completed with the included tool kit.

Чогултуу кадамдары:

1. Пакеттен чыгаруу: Велосипедди жана бардык компоненттерди таңгактан кылдаттык менен алып салыңыз.
2. Рулду орнотуу: Secure the handlebar stem into the fork tube and tighten the bolts. Ensure the handlebar is aligned with the front wheel.
3. Алдыңкы дөңгөлөктү орнотуу: If not already installed, attach the front wheel, ensuring it is properly seated in the fork dropouts and the quick-release skewer or axle nuts are securely tightened.
4. Педал орнотуу: Identify the left (L) and right (R) pedals. The left pedal threads counter-clockwise, and the right pedal threads clockwise. Apply a small amount of grease to the threads and tighten them securely.
5. Saddle and Seatpost Installation: Insert the seatpost into the seat tube and adjust to a comfortable riding height. Secure with the quick-release lever.
6. Батарея орнотуу: Ensure both batteries are securely seated in their compartments. Refer to the "Battery Information" section for charging instructions before first use.
7. Акыркы текшерүүлөр: Double-check all bolts, quick releases, and connections for tightness. Ensure brakes are properly adjusted and functional.

Figure 4.1: Fully assembled ENGWE X20 Electric Bike.

This image shows the ENGWE X20 Electric Bike in its fully assembled state, highlighting its robust frame, fat tires, and overall design. It provides a visual reference for the completed assembly.

Figure 4.2: ENGWE X20 Electric Bike in folded configuration.

This image illustrates the ENGWE X20 Electric Bike in its folded state, demonstrating its compact design for storage and transport. The folding mechanism is a key convenience feature.

5. Components Overview

Familiarize yourself with the key components of your ENGWE X20 Electric Bike:

• Мотор: 1000W Peak Power Hub Motor (Sustained 750W).
• Батареялар: Dual Removable Battery System (48V 14.4Ah + 48V 7.8Ah).
• Шиналар: 20" x 4.0" Fat Tires, motorcycle-style for enhanced stability and traction.
• Токтотуу: Triple Suspension System (Hydraulic Front, Mechanical Center, Air Rear).
• Тормоздор: Hydraulic Disc Brakes for reliable stopping power.
• Gears: Shimano 8-Speed System.
• Дисплей: Intuitive LCD interface for real-time data.
• кадр: All-aluminum foldable frame.

Figure 5.1: ашыкview of ENGWE X20 key features.

This image highlights the core features of the ENGWE X20, including its 1000W peak power, 50 km/h max speed, 20x4.0 inch fat tires, triple suspension, 14.4Ah + 7.8Ah dual batteries, and hydraulic disc brakes.

5.2-сүрөт: Детальдуу view of the ENGWE X20's powerful hub motor.

This image focuses on the powerful 1000W peak (750W sustained) hub motor of the ENGWE X20, illustrating its robust design and highlighting its strength compared to other e-bike motors.

Figure 5.3: Illustration of the ENGWE X20's triple suspension system.

This image details the triple suspension system of the ENGWE X20, showing the front hydraulic shock, rear air shock, and middle mechanical shock, emphasizing their role in providing a smooth ride.

Figure 5.4: Comparison of ENGWE X20 one-piece wheels versus traditional spoked wheels.

This image compares the one-piece wheels of the ENGWE X20 with traditional spoked wheels, highlighting the superior stability, durability, and ease of maintenance offered by the one-piece design.

6. Иштөө нускамалары

Күйгүзүү/өчүрүү:

• To power on, press and hold the power button on the LCD display.
• Өчүрүү үчүн кубат баскычын кайра басып, дисплей өчмөйүнчө кармап туруңуз.

Айдоо режимдери:

The X20 features three riding modes:

• ЭКО режими: Provides minimal motor assistance for maximum range.
• НОРМАЛДЫК режим: Offers balanced assistance for general riding.
• СПОРТ режими: Delivers maximum motor power for challenging terrain or higher speeds.

Switch between modes using the controls on the handlebar, typically indicated on the LCD display.

Gear Shifting (Shimano 8-Speed):

Use the twist grip shifter on the handlebar to change gears. Shift to lower gears for climbing hills and higher gears for flat terrain or downhill riding. Always pedal lightly when shifting to ensure smooth transitions.

Braking (Hydraulic Disc Brakes):

The ENGWE X20 is equipped with hydraulic disc brakes for superior stopping power. Apply both front and rear brakes simultaneously for effective and controlled stopping. Avoid sudden, hard braking, especially with the front brake, to prevent skidding.

Intelligent Speed Control:

The intelligent speed control system helps maintain a constant speed, enhancing riding comfort on longer stretches.

Жарыктандыруу:

The bike features automatic headlights and taillights for enhanced visibility. Light-sensitive headlights adjust automatically to ambient light conditions.

7. Батарея маалыматы

The ENGWE X20 features a dual removable battery system (48V 14.4Ah and 48V 7.8Ah) providing a combined energy capacity of 22.2Ah and a range of up to 95 miles.

Батареяларды заряддоо:

• Always use the original charger provided with your e-bike.
• Заряддоодон мурун велосипед өчүрүлгөнүн текшериңиз.
• You can charge the batteries while they are installed on the bike or remove them for charging.
• Кубаттоочу түзүлүштү батареянын кубаттоо портуна туташтырыңыз, андан кийин кубаттоочу түзүлүштү стандарттуу розеткага сайыңыз.
• Заряддоочу түзүлүштүн индикатору, адатта, заряддоо учурунда кызыл түстө күйүп, толук заряддалганда жашыл түскө айланат.
• Do not overcharge the batteries. Disconnect the charger once charging is complete.

Battery Care and Maintenance:

• Батареяларды салкын, кургак жерде, түз күндүн нурунан жана экстремалдык температурадан алыс сактаңыз.
• If storing for extended periods, charge the batteries to approximately 50-60% capacity and recharge every 1-2 months to prevent deep discharge.
• Avoid exposing batteries to water or excessive moisture.
• Do not puncture, drop, or disassemble the battery pack.

8. Техникалык тейлөө

Regular maintenance ensures the longevity and safe operation of your ENGWE X20 Electric Bike.

Routine Checks (Before Each Ride):

• Тормоздор: Test both front and rear brakes for proper function and responsiveness.
• Шиналар: Check tire pressure (refer to tire sidewall for recommended PSI) and inspect for any cuts, punctures, or excessive wear.
• Болттор жана бекиткичтер: Ensure all visible bolts, nuts, and quick releases are tight and secure.
• Батарея: Check battery charge level on the display.
• Жарыктар: Verify that headlights and taillights are working.

Мезгил-мезгили менен тейлөө:

• Тазалоо: Велосипедди жарнама менен үзгүлтүксүз тазалаңызamp кездеме. Жогорку басымда түздөн-түз электрдик тетиктерди жуубаңыз.
• чынжырды майлоо: Lubricate the chain every 100-200 miles or after riding in wet conditions.
• Тормоздук колодкалар: Тормоз колодкаларынын эскиргендигин текшерип, зарыл болгон учурда алмаштырыңыз.
• Токтотуу: Check suspension components for any leaks or damage. Keep them clean.
• Кесиптик кызмат: It is recommended to have your e-bike professionally serviced at least once a year or every 500 miles, whichever comes first.

9. Кыйынчылыктарды

This section addresses common issues you might encounter with your ENGWE X20 Electric Bike. For problems not listed here, please contact customer support.

10. Техникалык шарттар

11. Кепилдик жана колдоо

Кепилдик маалыматы:

ENGWE offers a one-year limited warranty for the motor, batteries, and controller of your X20 Electric Bike, starting from the date of purchase. This warranty covers manufacturing defects and material flaws under normal use. It does not cover damage resulting from misuse, accidents, unauthorized modifications, or normal wear and tear.

Кардарларды колдоо:

Our dedicated customer support team is available 24/7 to assist you with any questions, concerns, or technical issues you may encounter. For assistance, please refer to the contact information provided on the ENGWE official webсайт же сатып алуу документтери.

For more information and support, visit the official ENGWE store: Amazon'догу ENGWE дүкөнү.