Hercules HE818D санарип көзөнөк жана бекиткич машинасы 110V колдонуучу колдонмосу

1. Киришүү

This manual provides essential instructions for the safe and efficient operation, setup, maintenance, and troubleshooting of your Hercules HE818D Digital Eyelet and Snap Fastener Machine. Please read this manual thoroughly before operating the machine to ensure proper usage and to prevent damage or injury. Keep this manual for future reference.

2. Коопсуздук нускамалары

Кырсыктарды болтурбоо жана коопсуз эксплуатацияны камсыз кылуу үчүн ар дайым төмөнкү коопсуздук эрежелерин сактаңыз:

• Электр коопсуздугу: Ensure the machine is connected to a grounded 110V power outlet. Do not operate with wet hands or in damp conditions. Disconnect power before performing any maintenance or adjustments.
• Жеке коопсуздук: Wear appropriate personal protective equipment, such as safety glasses, to protect against flying debris. Keep hands and loose clothing away from moving parts during operation.
• Иш чөйрөсү: Operate the machine on a stable, level surface. Keep the work area clean and well-lit. Ensure adequate space around the machine for safe operation and material handling.
• Материалды иштетүү: Only use materials and fasteners compatible with the machine. Do not force materials into the machine.
• Балдар жана уруксаты жок персонал: Keep children and unauthorized individuals away from the machine during operation and when it is powered on.

3. Продукт бүтүп калдыview

The Hercules HE818D is an advanced electronic machine designed for efficiently setting eyelets and snap fasteners. It features a robust metal construction and electronic controls for consistent and precise application across various materials.

Негизги өзгөчөлүктөрү:

• Электрондук башкаруу: Ensures precise and consistent eyelet and snap fastener placement.
• Мыкты курулуш: Built with high-quality metal components for durability and long-term reliability.
• Натыйжалуу операция: Powerful motor for rapid and efficient fastening, enhancing productivity.
• Материалдын ар тараптуулугу: Compatible with a wide range of materials, including paper, cardboard, fabrics, and light leather.

This image displays a side view of the Hercules HE818D Digital Eyelet and Snap Fastener Machine. It features a white and gray body with a digital control panel on the front and the 'HERCULES' brand logo on the side. The machine's main working mechanism, including the die and press, is visible at the bottom.

4. Орнотуу

Follow these steps to set up your Hercules HE818D machine:

1. Пакеттен чыгаруу: Carefully remove the machine from its packaging. Retain all packaging materials for potential future transport or storage.
2. Жайгашкан жери: Place the machine on a sturdy, level workbench or table capable of supporting its weight (approximately 40 kg). Ensure there is sufficient space around the machine for safe operation and material handling.
3. Кубат туташуу: Connect the power cord to the machine and then plug it into a standard 110V grounded electrical outlet. Ensure the power switch is in the 'OFF' position before plugging in.
4. Алгачкы текшерүү: Before first use, visually inspect the machine for any signs of damage that may have occurred during shipping. Ensure all components are securely in place.
5. Die Installation: Install the appropriate die set for the eyelets or snap fasteners you intend to use. Refer to the die set instructions for specific installation procedures.

А фронт view of the Hercules HE818D machine, highlighting its digital control panel with various buttons and a numerical display. The main pressing mechanism is visible at the base, along with a yellow warning label.

5. Иштөө нускамалары

Once the machine is set up and the correct die is installed, follow these steps for operation:

1. Күйгүзүү: Flip the main power switch to the 'ON' position. The digital display should illuminate.
2. Орнотууларды тууралоо: Use the control panel buttons to select the desired mode (eyelet or snap) and adjust pressure or depth settings if available and necessary for your material and fastener type.
3. Load Fasteners: Place the eyelet or snap fastener components into their respective holders on the die set. Ensure they are correctly oriented.
4. Позиция материалы: Carefully position your material (fabric, paper, leather, etc.) over the lower die, aligning it where the fastener is to be applied.
5. Activate Press: Depending on the model, activate the press using the foot pedal or a designated button on the control panel. The machine will automatically apply the fastener.
6. Текшерүү: After each application, inspect the fastener to ensure it is securely and correctly set. Adjust settings as needed for optimal results.
7. Өчүрүү: When finished, turn off the main power switch and unplug the machine from the power outlet.

6. Техникалык тейлөө

Regular maintenance ensures the longevity and optimal performance of your machine:

• Тазалоо: Regularly clean the machine, especially the die area, to remove dust, material scraps, and fastener residue. Use a soft, dry cloth. For stubborn residue, a slightly damp cloth can be used, ensuring the machine is unplugged and completely dry before next use.
• Майлоо: Periodically apply a small amount of machine oil to moving parts as indicated in the machine's specific lubrication points (if any are visible or specified). Avoid over-lubrication.
• Die Inspection: Inspect die sets for wear or damage. Worn dies can lead to inconsistent results and should be replaced.
• Сактагыч: Колдонулбай турган учурда, машинаны таза, кургак чөйрөдө, чаңдан жана өтө жогорку температурадан корголгон жерде сактаңыз.

А тарап view of the Hercules HE818D machine, showcasing its robust metal construction and the prominent 'HERCULES' branding. This view highlights the machine's overall design and build quality.

7. Кыйынчылыктарды

Жалпы көйгөйлөр жана аларды чечүү жолдору үчүн төмөнкү таблицаны караңыз:

8. Техникалык шарттар

9. Кепилдик жана колдоо

For warranty information, technical support, or service inquiries, please contact your original point of purchase or the manufacturer directly. Ensure you have your model number (HE818D) and purchase details available when contacting support.

Manufacturer: Hercules