Продукт бүттүview
The STIGA Tornado 398 is a powerful and robust ride-on mower designed for efficient lawn maintenance. It features a STIGA ST 450 engine and a 98 cm cutting deck, making it suitable for various terrains.
Негизги өзгөчөлүктөрү
- STIGA ST 450 Engine: Powerful 432 cm³ single-cylinder engine for reliable mowing performance, suitable for challenging terrains.
- Hydrostatic Transmission: Provides smooth and comfortable driving with a 98 cm cutting deck.
- Efficient Side Discharge: Rapid and uniform grass dispersion for a clean and effortless result.
- Кесүү бийиктигин тууралоо: 7 positions from 25 to 80 mm to adjust mowing to the desired height.
- Optional Mulching: STIGA Multiclip system for effective mulching and naturally nourished lawn (kit sold separately).
Фронт view of the STIGA Tornado 398 ride-on mower, showcasing its yellow and black design.
Орнотуу жана чогултуу
Before operating your STIGA Tornado 398, ensure proper assembly and initial setup. The mower is delivered partially assembled and requires some final steps before use.
Баштапкы текшерүүлөр
- Бардык таңгактоочу материалдар алынып салынганын текшериңиз.
- Таңгактоо тизмесинде саналган бардык компоненттер бар экенин текшериңиз.
- Add engine oil as required (engine oil is not pre-filled).
- The battery is typically pre-charged, but ensure it is securely connected.
- Refer to the detailed assembly instructions provided in the separate assembly guide for specific steps.
Side view of the STIGA Tornado 398 ride-on mower, highlighting its compact design and wheels.
Close-up of the comfortable black seat on the STIGA Tornado 398 ride-on mower.
Деталдаштырылган view of the ergonomic steering wheel of the STIGA Tornado 398.
Фронт view of the STIGA Tornado 398, showing the grille and headlights.
Close-up of the robust front bumper of the STIGA Tornado 398, designed for protection.
View of the convenient storage compartment located near the steering wheel on the STIGA Tornado 398.
Жогорудан төмөн view of the STIGA ST 450 engine, located under the hood of the Tornado 398.
Rear fender of the STIGA Tornado 398, featuring a practical cup holder.
Иштөө нускамалары
Follow these guidelines for safe and effective operation of your ride-on mower.
Чөп чапкычты ишке киргизүү
- Ensure the engine hood is securely closed. The mower will not start if the hood is open.
- Check the fuel level and ensure there is sufficient engine oil.
- Тормозду иштетиңиз.
- От алдыруу ачкычын баштапкы абалына буруңуз.
- Once the engine starts, release the key.
Чөп чабуу
- Adjust the cutting height using the lever, choosing from 7 positions between 25 mm and 80 mm.
- Engage the cutting blades.
- Utilize the hydrostatic transmission for smooth speed control and comfortable maneuvering.
- The mower features efficient side discharge for uniform grass dispersion.
- For mulching, ensure the optional STIGA Multiclip kit is installed (sold separately).
Техникалык тейлөө
Regular maintenance is crucial for the longevity and optimal performance of your STIGA Tornado 398.
Күнүмдүк текшерүүлөр
- Мотор майы: Check engine oil level before each use and change according to the engine manufacturer's recommendations.
- Кесүүчү палуба: Clean the underside of the cutting deck after each use to prevent grass buildup.
- Бышактар: Inspect cutting blades for sharpness and damage. Sharpen or replace as needed.
- Шина басымы: Maintain recommended tire pressure for optimal traction and even cutting.
- Жалпы тазалоо: Keep the mower clean from debris, especially around the engine and cooling fins.
Сактагыч
For extended periods of non-use, especially during off-season, prepare your mower for storage:
- Чөп чапкычты жакшылап тазалаңыз.
- Drain fuel or add a fuel stabilizer.
- Disconnect the battery or use a trickle charger.
- Кургак, корголгон жерде сактаңыз.
Проблемаларды чечүү
This section provides solutions to common issues you might encounter with your STIGA Tornado 398.
| Маселе | Мүмкүн себеп | Чечим |
|---|---|---|
| Чөп чапкыч иштебейт | Engine hood open, low fuel, dead battery, spark plug issue. | Ensure engine hood is closed. Check fuel level. Check battery connections and charge. Inspect spark plug. |
| Начар кесүү көрсөткүчү | Dull blades, incorrect cutting height, excessive grass height. | Sharpen or replace blades. Adjust cutting height. Mow tall grass in multiple passes. |
| Бирдей эмес кесип | Uneven tire pressure, bent blade, debris in cutting deck. | Check and adjust tire pressure. Inspect blades for damage. Clean cutting deck. |
| Ашыкча термелүү | Bent blade, loose components, engine imbalance. | Inspect blades for damage. Check all bolts and fasteners. If issue persists, consult a service technician. |
If you encounter issues not listed here or if solutions do not resolve the problem, please contact authorized STIGA service personnel.
Техникалык мүнөздөмөлөр
| Спецификация | Нарк |
|---|---|
| Продукциянын өлчөмдөрү (L x W x Y) | 17 x 8 x 94 см; 157 килограмм |
| Батарея(лар) | 1 x 12V (requires batteries) |
| Шилтеме модели | Торнадо 398 |
| Бийиктик | 110 сантиметр |
| Узундук | 172.6 сантиметр |
| Туурасы | 120 сантиметр |
| Салмагы | 165 килограмм |
| Материалдын түрү | Металл, пластик |
| Күндүн таасири | Толук күн |
| Power Source | Термикалык |
| Запастык бөлүктөрдүн болушу | Запастык бөлүктөр боюнча маалымат жок |
| ASIN | B0CV45Y9WQ |
| Бренд | Stiga |
| Түс | Сары |
| Стиль | Цилиндр |
| Элемент Салмагы | 157 килограмм |
| Кесүү туурасы | 98 сантиметр |
| Number of Positions (Cutting Height) | 7 |
| Иштөө режими | Manual |
Кепилдик жана колдоо
STIGA products are manufactured to high-quality standards and are backed by a manufacturer's warranty. Specific warranty terms and conditions may vary by region and purchase date. Please refer to the warranty card included with your product or visit the official STIGA webтолук маалымат алуу үчүн сайт.
For technical support, spare parts, or service inquiries, please contact your authorized STIGA dealer or the STIGA customer service department. Ensure you have your product model number (Tornado 398) and serial number ready when contacting support.
