1. Продукт бүтүп калдыview
The Dorman 46912 Hood Release Handle Assembly is a direct replacement component designed to restore the functionality of your vehicle's hood release mechanism. This assembly is engineered to fit and perform like the original equipment, ensuring reliable operation. It is constructed from high-quality materials for durability and longevity.
1.1-сүрөт: Фронт view of the Dorman 46912 Hood Release Handle Assembly, showing the hood icon.
2. Пакеттин мазмуну
Орнотууну баштоодон мурун бардык компоненттер бар экендигин текшериңиз:
- 1 x Dorman 46912 Hood Release Handle Assembly
3. Коопсуздук маалыматы
Always observe general automotive safety precautions when working on your vehicle. Failure to do so may result in injury or damage to the vehicle.
- Унаа тегиз жерде токтоп турганына, токтоочу тормозду иштетиңиз.
- Моторду өчүрүп, от алдыруудан ачкычты чыгарыңыз.
- Кол кап жана көздү коргоо сыяктуу тиешелүү жеке коргоочу шаймандарды кийиңиз.
- Эгерде сиз орнотуу процессинин кайсы бир кадамы боюнча күмөн санасаңыз, квалификациялуу автоунаа технигине кайрылыңыз.
4. Орнотуу боюнча нускамалар
This hood release handle assembly is designed for direct replacement and features an easy-to-install clip-on mechanism. Specific installation steps may vary slightly depending on your vehicle's make and model. Refer to your vehicle's service manual for detailed instructions if necessary.
Жалпы орнотуу кадамдары:
- Locate the Existing Handle: Identify the current hood release handle, typically located on the driver's side, beneath the dashboard.
- Кабельди ажыратыңыз: Carefully detach the hood release cable from the existing handle. This may involve releasing a clip or a small retaining pin.
- Эски тутканы алып салуу: Unclip or unfasten the old hood release handle from its mounting point.
- Attach the New Handle: Connect the hood release cable to the Dorman 46912 assembly. Ensure the cable is securely seated.
- Mount the New Handle: Clip the new Dorman 46912 Hood Release Handle Assembly into its designated mounting location. Ensure it is firmly secured.
- Сыноо функциясы: Gently pull the new handle to ensure it operates smoothly and releases the hood latch correctly. Close the hood and re-test to confirm proper engagement and release.
4.1-сүрөт: Side view of the Dorman 46912 Hood Release Handle Assembly, illustrating the internal cable connection point.
4.2-сүрөт: Арткы view of the Dorman 46912 Hood Release Handle Assembly, highlighting the clip-on attachment mechanism.
5. Иштөө нускамалары
To open your vehicle's hood using the Dorman 46912 Hood Release Handle Assembly:
- Ensure the vehicle is stationary and the engine is off.
- Locate the hood release handle, typically on the lower left side of the driver's dashboard.
- Pull the handle firmly and steadily towards you. You should hear a click as the primary hood latch disengages.
- Proceed to the front of the vehicle. The hood will be slightly ajar.
- Locate the secondary safety latch, usually positioned under the front edge of the hood, near the center. Push or lift this latch to fully release the hood.
- Lift the hood and secure it with the prop rod, if applicable.
To close the hood, lower it gently until it rests on the secondary latch, then press down firmly on the center of the hood until the primary latch engages with a click. Ensure the hood is fully closed and secured before driving.
6. Техникалык тейлөө
The Dorman 46912 Hood Release Handle Assembly is designed for long-lasting performance with minimal maintenance. However, periodic inspection can help ensure continued reliable operation:
- Визуалдык текшерүү: Periodically check the handle for any signs of wear, cracks, or damage.
- Кабелди майлоо: If the hood release mechanism feels stiff, consider lubricating the hood release cable and latches with a suitable automotive lubricant. Consult your vehicle's service manual for recommended lubrication points and types.
- Тазалык: Keep the area around the handle free from dirt and debris that could impede its movement.
7. Кыйынчылыктарды
If you encounter issues with your Dorman 46912 Hood Release Handle Assembly, consider the following:
| Көйгөй | Мүмкүн себеп | Чечим |
|---|---|---|
| Туткасы бошоп же ажырап калгандай сезилет. | Handle not properly clipped into mounting point. | Re-secure the handle firmly into its mounting location. |
| Handle pulls but hood does not release. | Cable disconnected from handle or latch; cable stretched or broken; hood latch mechanism seized. | Inspect cable connection at both the handle and the hood latch. Check cable for damage. Lubricate hood latch mechanism. If cable is damaged, it may need replacement. |
| Туткасы катуу же тартуу кыйын. | Lack of lubrication in cable or latch mechanism; debris obstructing movement. | Lubricate the hood release cable and hood latch mechanism. Clean any debris from the handle's pivot points. |
Эгер көйгөйдү чечүү кадамдары көйгөйдү чечпесе, анда профессионал унаа техниги менен кеңешүү сунушталат.
8. Продукттун спецификациялары
| Бренд | Дорман |
| Модель номери | 46912 |
| Түс | Кара |
| Сырткы бүтүрүү | Иштелген |
| Өзгөчө өзгөчөлүк | Орнотуу оңой |
| Камтылган компоненттер | Dorman 46912: Hood Release Handle Assembly |
| Кулпу түрү | Кулпу жок |
| Элемент Салмагы | 1.44 унция |
| Продукциянын өлчөмдөрү | 1.91 x 3.45 x 5.49 дюйм |
| Туткасы Тиркеме механизми | клип жөнүндө |
| UPC | 194883234604 |
| OEM тетик номери(лери) | 4589482AB, 4589482AC, 5109273AA, 5160352AB, 5160352AC |
9. Кепилдик жана колдоо
Dorman products are backed by a team of product experts in the United States and more than a century of automotive experience, ensuring trustworthy quality. For specific warranty information or technical support, please refer to the official Dorman webсайтына кириңиз же түздөн-түз Dorman кардарларды тейлөө кызматына кайрылыңыз.
Көбүрөөк маалымат алуу үчүн Dorman дүкөнүнө кайрылсаңыз болот: Дорман расмий дүкөнү
