Introduction
This manual provides detailed instructions for the safe and proper installation, operation, and maintenance of your Pipishell Full Motion TV Wall Mount Brackets. These mounts are designed to securely hold your flat or curved screen television, offering flexible viewing angles. Please read this manual thoroughly before installation and keep it for future reference.
Сүрөт: бүттүview of Pipishell Full Motion TV Wall Mounts, including models for both smaller and larger televisions.
Коопсуздук маалыматы
ЭСКЕРТҮҮ: Failure to read and follow all instructions can result in personal injury, property damage, or voiding of warranty. If you do not understand these instructions or have doubts about the safety of the installation, please contact a qualified installer.
- Do not install on drywall alone. Ensure the mount is secured to a solid wood stud, concrete, or brick wall.
- Verify your TV's VESA pattern, weight, and size are within the mount's specifications.
- Берилген жабдыктарды гана колдонуңуз. Бузулган же жок тетиктерди колдонбоңуз.
- Always have at least two people for installation, especially when lifting the TV.
- Ensure all screws are tightened securely but do not overtighten.
Бөлүктөр тизмеси
Before installation, ensure all parts are present and undamaged. Refer to your specific model's packaging for a complete list of included hardware.
Image: Included components for the PILF8 model, showing the main mount assembly, TV attachment rails, cable management ties, and a bubble level.
Image: Included components for the PIMF2 model, showing the main mount assembly and TV attachment rails.
Негизги компоненттер:
- Wall Plate Assembly (with articulating arms)
- TV Bracket Rails
- Various Screws, Washers, and Spacers for TV and Wall Attachment
- Concrete Anchors (for concrete/brick wall installation)
- Кабель байламталары
- көбүк деңгээли
- Anti-Drop End Caps (PILF8)
- Security Screws (PILF8)
Техникалык шарттар
| Өзгөчөлүк | PILF8 (37-75 Inch) | PIMF2 (26-55 Inch) |
|---|---|---|
| Монтаж түрү | Дубалга орнотуу | |
| Кыймыл түрү | Articulating, Swivel, Tilt | |
| Материал | Эритме болот | |
| Compatible TV Size Range | 37" - 75" | 26" - 55" |
| Максималдуу Салмак сыйымдуулугу | 100 фунт (45.3 кг) | 66 фунт (30 кг) |
| VESA шайкештиги | 200x100ммден 600x400ммге чейин | 75x75ммден 400x400ммге чейин |
| Тит бурч | +5° / -15° | +5° / -15° |
| Swivel Angle | +/-45° | +/-90° (max depends on TV size) |
| Дубалдан узартуу | Retract to 3.2", Extend up to 15.4" | Retract to 2.2", Extend up to 17" |
| Орнотуудан кийинки тегиздөө | +/-3° | N/A (implied by swivel/tilt) |
| Дубалдын шайкештиги | 16" Max wood studs, concrete, brick | Single wood stud, concrete, brick |
Image: Compatibility check points for your TV and wall type.
Орнотуу жана орнотуу
Керектүү куралдар (камтылган эмес):
- Карандаш
- Филлипс баш бурагычы
- Электрдик бургу
- Stud Finder (for wood stud walls)
- Розетка ачкычы же жөнгө салынуучу ачкыч
- Балка (бетон анкерлер үчүн)
Орнотууга чейинки текшерүү тизмеси:
- Confirm your TV's weight and VESA pattern are within the mount's specifications.
- Identify your wall type (wood stud, solid concrete, or brick). Гипсокартонго гана орнотулбаңыз.
- Locate the desired mounting position, ensuring it is at a comfortable viewing height and away from electrical wires or plumbing.
Орнотуу кадамдары:
Сүрөт: Жөнөкөйлөштүрүлгөн 3 кадамдуу орнотуу процесси.
- Сыналгы кашааларын сыналгыга тиркөө:
Carefully place your TV face down on a soft, clean surface. Align the TV bracket rails with the VESA mounting holes on the back of your TV. Select the appropriate screws, washers, and spacers from the hardware kit that fit your TV. Secure the brackets to the TV, ensuring they are level and firmly attached.
Сүрөт: деталдуу view of the PIMF2 mount, highlighting the TV bracket attachment points.
- Mount Wall Plate to Wall:
Determine the exact mounting location. Use a stud finder to locate wood studs if applicable. For concrete or brick walls, mark drill holes directly. Use the wall plate as a template to mark the drill holes. Drill pilot holes according to the recommended drill bit size for your wall type. Secure the wall plate to the wall using the appropriate lag bolts and washers. For concrete/brick, insert concrete anchors before securing the lag bolts. Ensure the wall plate is level using the included bubble level.
Image: Wall compatibility guide for installation.
- Hang TV onto Wall Plate:
With assistance, carefully lift the TV with the attached brackets and hook them onto the wall plate. Ensure the TV brackets are securely seated on the wall plate's arms. Tighten any security screws or locking mechanisms on the TV brackets to prevent accidental dislodgement. Perform post-installation leveling if necessary (for PILF8 model, +/-3° adjustment is available).
Image: Key safety features like security screws and anti-drop end caps.
Телевизордун бекиткичин иштетүү
Your Pipishell full motion TV mount allows for various adjustments to achieve the optimal viewтажрыйбасы.
- Айлануучу: Gently push or pull the TV to swivel it left or right. The PILF8 offers +/-45° swivel, while the PIMF2 offers up to +/-90° (depending on TV size).
- Россия: Loosen the tilt adjustment knobs or bolts on the TV brackets, adjust the TV to your desired tilt angle (+5° to -15°), and then re-tighten the knobs/bolts to secure the position.
- Кеңейтүү/чыгуу: Pull the TV away from the wall to extend the articulating arms, or push it back towards the wall to retract it. The PILF8 extends up to 15.4 inches and retracts to 3.2 inches. The PIMF2 extends up to 17 inches and retracts to 2.2 inches.
Image: Demonstrating the swivel function for comfortable viewбурчтар.
Image: Demonstrating the extension and retraction capabilities of the mount.
Image: Full range of motion for the PIMF2 mount, including extension, tilt, and swivel.
Техникалык тейлөө
Үзгүлтүксүз техникалык тейлөө сыналгы монтажыңыздын узак мөөнөттүү жана коопсуз иштешин камсыз кылат.
- Periodically check all screws and bolts to ensure they remain securely tightened.
- Монтажды жумшак, кургак чүпүрөк менен тазалаңыз. Абразивдүү тазалагычтардан же эриткичтерден качыңыз.
- If the mount's movement becomes stiff, a small amount of silicone-based lubricant can be applied to the articulating joints (avoiding contact with the TV or wall).
Проблемаларды чечүү
| Көйгөй | Мүмкүн себеп | Чечим |
|---|---|---|
| Орнотуудан кийин сыналгы түз эмес. | Wall plate not level, or TV not adjusted. | For PILF8, use the +/-3° post-installation leveling feature. For PIMF2, re-adjust the TV on the brackets or re-level the wall plate. |
| Тоо бош же солкулдап сезилет. | Screws not fully tightened, or incorrect wall anchors used. | Ensure all wall plate and TV bracket screws are securely tightened. Verify correct anchors were used for your wall type. If issue persists, consult a professional. |
| Difficulty swiveling or tilting the TV. | Муундары катуу же өтө чыңалган. | Check if any tilt knobs are overtightened. Apply a small amount of silicone lubricant to the articulating joints if necessary. |
| Телевизор розеткага туура келбейт. | Incorrect VESA pattern or TV weight/size. | Verify your TV's VESA pattern and weight against the mount's specifications. If incompatible, the mount cannot be used. |
Кепилдик жана колдоо
For warranty information or technical support, please contact Pipishell customer service through their official website or the retailer where the product was purchased. Please have your product model (PILF8 or PIMF2) and purchase details ready when contacting support.
You can visit the Pipishell Store for more information: Amazon'догу Pipishell дүкөнү
