1. Киришүү
This manual provides instructions for the proper use, installation, and maintenance of the EuroTech Torch Hose Clamps, Model HC-2. These clamps are designed to secure 1/4" Outer Diameter (OD) and 1/8" Inner Diameter (ID) hoses, commonly used with Gentec Little Torches, ensuring a tight and reliable connection.
2. Продукт бүтүп калдыview
The EuroTech Torch Hose Clamps are essential components for maintaining secure connections in torch systems. They are constructed from durable steel, providing strength and resistance to wear. Each package contains two clamps, suitable for various applications requiring secure hose fastening.
1-сүрөт: Каптал view of two EuroTech Torch Hose Clamps, highlighting their robust steel construction and curved design for hose fitting.
2-сүрөт: жогорудан ылдыйга view of two EuroTech Torch Hose Clamps, illustrating the integrated locking tabs for secure hose attachment.
3. Орнотуу жана орнотуу
Follow these steps to properly install the EuroTech Torch Hose Clamps:
- Prepare Hoses: Ensure the 1/4" OD and 1/8" ID hoses are clean and free from debris at the connection points.
- Position Clamp: Slide one EuroTech hose clamp over the end of the hose that will be connected to the torch or fitting.
- Туташтыруу шланг: Push the hose firmly onto the appropriate barb or connection point of the torch or fitting until it is fully seated.
- Secure Clamp: Клamp over the connection point, ensuring it covers both the hose and the barb. Use appropriate pliers (not included) to compress the clamp's tabs until they lock securely, creating a tight seal.
- Байланышты текшерүү: Gently tug on the hose to confirm that the connection is secure and the clamp is holding firmly. Check for any signs of leakage if applicable to the hose's contents.
Эскертүү: Always ensure the correct size clamp is used for the hose dimensions to prevent damage or insecure connections.
4. Иштөө нускамалары
Once properly installed, the EuroTech Torch Hose Clamps operate passively by maintaining a constant, secure compression around the hose and fitting. No further operational steps are required beyond initial installation. The clamps are designed to provide a reliable, leak-free connection for the intended hose types.
5. Техникалык тейлөө
To ensure the longevity and effectiveness of your EuroTech Torch Hose Clamps, consider the following maintenance guidelines:
- Үзгүлтүксүз текшерүү: Мезгил-мезгили менен клamps for any signs of wear, corrosion, or deformation. Ensure they remain tightly secured.
- Тазалоо: If necessary, clean the clamps with a dry cloth to remove any dust or debris. Avoid harsh chemicals that may degrade the material.
- Алмаштыруу: Эгерде клamp shows signs of damage, rust, or loss of clamping force, replace it immediately to prevent potential hazards or leaks.
6. Кыйынчылыктарды
Төмөндө жалпы маселелер жана алардын потенциалдуу чечимдери келтирилген:
- Бошоң байланыш:
- cl камсыз кылууamp was fully compressed during installation.
- Verify that the correct clamp size is used for the hose and fitting.
- Эгерде clamp appears stretched or damaged, replace it.
- Коррозия/дат:
- While made of steel, prolonged exposure to moisture or corrosive environments can lead to rust.
- Clean and dry clampүзгүлтүксүз.
- Replace severely corroded clamps.
7. Техникалык шарттар
| Атрибут | Деталь |
|---|---|
| Бренд | EuroTech |
| Модель номери | HC-2 |
| Hose Compatibility (OD) | 1/4" |
| Hose Compatibility (ID) | 1/8" |
| Материал | Болот |
| Түс | Silver |
| Пакеттин саны | 2 клamps |
| UPC | 640823617285 |
8. Кепилдик жана колдоо
Specific warranty details and direct support contact information for the EuroTech Torch Hose Clamps (Model HC-2) were not provided in the product information. For warranty inquiries or technical support, please refer to the original point of purchase or contact EuroTech directly through their official channels.
You may visit the EuroTech store on Amazon for more information: EuroTech Store
