1. Киришүү жана коопсуздук маалыматы
Thank you for choosing the Wolf 25.4CC Petrol Chainsaw. This manual provides essential information for the safe and effective operation, maintenance, and care of your chainsaw. Please read and understand all instructions before operating the machine. Keep this manual for future reference.
1.1 Жалпы коопсуздук эскертүүлөрү
- Ар дайым тиешелүү жеке коргонуу шаймандарын (ЖКК) кийиңиз including a safety helmet, eye protection, hearing protection, heavy-duty gloves, safety trousers, and safety boots.
- Never operate the chainsaw when fatigued, under the influence of alcohol, drugs, or medication.
- Keep children, bystanders, and animals at a safe distance (at least 10 meters) from the work area.
- Inspect the chainsaw before each use for loose parts, damage, or wear. Do not operate a damaged chainsaw.
- Туура желдетүүнү камсыз кылыңыз when operating the chainsaw, as exhaust fumes are toxic.
- Handle fuel with extreme care. Fuel is highly flammable. Refuel in a well-ventilated area with the engine off and cool.
- Be aware of kickback. Kickback can occur when the moving chain at the tip of the guide bar contacts an object, or when the wood closes in and pinches the saw chain in the cut.
2. Продукт бүтүп калдыview
The Wolf 25.4CC Petrol Chainsaw is designed for domestic tree pruning and cutting tasks. It features a lightweight design and a powerful 0.8KW engine.
2.1 Камтылган компоненттер
- 1 x Wolf 25.4CC Petrol Chainsaw unit
- Гид Бар
- Chain Chain
- Гид тилкесинин капкагы
- Toolkit
- Күйүүчү май аралаштыруучу бөтөлкө
Image 1: The Wolf 25.4CC Petrol Chainsaw, accompanied by a fuel mixing bottle and a toolkit, as typically included in the package.
Сүрөт 2: Каптал view of the Wolf 25.4CC Petrol Chainsaw, showing the assembled guide bar and saw chain.
3. Орнотуу жана чогултуу
3.1 Assembling the Guide Bar and Chain
- Ensure the engine is off and the spark plug cap is disconnected for safety.
- Remove the chain brake cover by loosening the two nuts.
- Place the guide bar onto the studs, ensuring the chain tension pin aligns with the hole in the guide bar.
- Carefully fit the saw chain around the sprocket and into the groove of the guide bar. Ensure the cutting edges of the chain are facing the correct direction.
- Replace the chain brake cover and hand-tighten the nuts.
- Adjust the chain tension using the tensioning screw. The chain should be snug against the guide bar but still able to be pulled freely by hand. There should be no slack on the underside of the guide bar.
- Fully tighten the nuts to secure the chain brake cover and guide bar.
3.2 Fueling the Chainsaw
This chainsaw uses a 2-stroke petrol engine and requires a specific fuel mixture. Never use pure petrol.
- Күйүүчү май түрү: Use unleaded petrol with an octane rating of 90 or higher.
- Май түрү: Аба менен муздатылган кыймылдаткычтар үчүн атайын иштелип чыккан жогорку сапаттагы 2 такттуу мотор майын колдонуңуз.
- Аралаштыруу катышы: Refer to the chainsaw's label or manufacturer's recommendation for the exact petrol-to-oil ratio (e.g., 25:1 or 50:1). Use the provided fuel mixing bottle for accurate measurement.
- Процедура: Mix the fuel and oil thoroughly in a separate, approved fuel container. Pour the mixture into the chainsaw's fuel tank. Do not overfill.
- чынжыр майы: Fill the chain oil reservoir with good quality chain lubricant. This is crucial for chain and bar longevity.
4. Араны иштетүү
4.1 Моторду ишке киргизүү
- Place the chainsaw on a firm, flat surface. Ensure the chain brake is engaged (pushed forward).
- Set the choke lever to the 'closed' (cold start) position.
- Күйүүчү май көрүнгөнгө чейин праймер лампасын бир нече жолу басыңыз.
- Кыймылдаткыч кыска убакытка күйгөнгө чейин (адатта 1-3 жолу тартылганга чейин) стартердин шнурун бекем жана туруктуу тартыңыз.
- Once it fires, move the choke lever to the 'open' (run) position.
- Кыймылдаткыч ишке кирип, бир калыпта иштегенге чейин стартердин шнурун кайра тартыңыз.
- Allow the engine to warm up for a few moments.
- Disengage the chain brake (pull back towards the handle) before cutting.
4.2 Cutting Techniques and Safety
- Maintain a firm grip on both handles with both hands.
- Stand with good balance and a wide stance.
- Avoid cutting with the tip of the guide bar to prevent kickback.
- Always be aware of falling branches and the direction of the cut.
- Илин бийиктигинен жогору кесип албаңыз.
- Clear the work area of obstacles and debris.
- Чынжырлуу арааны эч качан бир кол менен иштетпеңиз.
5. Техникалык тейлөө
Үзгүлтүксүз техникалык тейлөө оптималдуу иштөөнү камсыз кылат жана чынжырлуу арааңыздын иштөө мөөнөтүн узартат.
5.1 Күнүмдүк тейлөө
- Аба чыпкасын тазалоо: Аба чыпкасын алып салып, тазалаңыз. Бузулган болсо, алмаштырыңыз.
- Check chain tension: Керек болсо тууралаңыз.
- Inspect guide bar: Check for wear, burrs, and ensure the oil hole is clear.
- Sharpen chain: A sharp chain cuts efficiently and safely. Use a round file of the correct diameter for your chain.
- Clean the chainsaw: Remove sawdust and debris from the engine fins and chain brake mechanism.
5.2 Мезгил-мезгили менен тейлөө
- Шам: От алдыргычты текшерип, тазалаңыз. Эгерде эскирген же булганган болсо, аны алмаштырыңыз.
- Күйүүчү май чыпкасы: Check and replace the fuel filter if clogged.
- Карбюратор тууралоо: If the engine runs poorly, consult a qualified service technician.
5.3 Сактоо
- Empty the fuel tank and run the engine until it stops to clear the carburetor.
- чынжыр арааны кылдат тазалаңыз.
- Apply a light coat of oil to the guide bar and chain to prevent rust.
- Store the chainsaw in a dry, well-ventilated area, out of reach of children.
6. Кыйынчылыктарды
| Көйгөй | Мүмкүн себеп | Чечим |
|---|---|---|
| Мотор иштебейт | No fuel, incorrect choke setting, fouled spark plug, flooded engine | Check fuel level, adjust choke, clean/replace spark plug, clear flooded engine (refer to manual) |
| Кыймылдаткыч начар иштейт/кубат жетишпейт | Dirty air filter, incorrect fuel mixture, dull chain, carburetor needs adjustment | Clean air filter, use correct fuel mixture, sharpen chain, consult service technician |
| Чынжыр кыймылдабайт | Chain brake engaged, incorrect chain tension, damaged clutch | Disengage chain brake, adjust chain tension, consult service technician |
| Ашыкча термелүү | Loose components, damaged chain/bar | Check all fasteners, inspect chain and bar for damage, replace if necessary |
7. Техникалык шарттар
- Модел: W25.4CC
- Кыймылдаткычтын жылышы: 25.4CC
- Rated Output: 0.8КВт
- Кубат булагы: Fuel Powered (Petrol)
- Продукциянын өлчөмдөрү (L x W x Y): 30 см х 60 см х 23.5 см
- Салмагы (болжол менен): 4.5 кг (Таңгактын салмагы)
- Бышактын материалы: Эритме болот
- Түсү: Кызыл/Сары
- Өзгөчө өзгөчөлүгү: Жеңил
8. Кепилдик жана колдоо
Wolf products are manufactured to high-quality standards. For warranty information, please refer to the documentation provided with your purchase or contact your retailer. For technical support or spare parts inquiries, please contact the authorized Wolf service center in your region. Keep your proof of purchase for any warranty claims.
Image 3: The official Wolf Garten logo.
