1. Киришүү
The WANLUTECH MOT-73 is a versatile optical fiber tester designed for comprehensive network and fiber optic analysis. It integrates multiple functions including OTDR, Optical Power Meter (OPM), Visual Fault Locator (VFL), Light Source (LS), Optical Loss Test (OLT), RJ45 Cable Tester, and various network tools. This manual provides detailed instructions for the proper setup, operation, and maintenance of your device.
2. Коопсуздук маалыматы
Please read and understand all safety warnings before operating the device to prevent injury or damage. Keep this manual for future reference.
- Лазердик коопсуздук: The Visual Fault Locator (VFL) and Light Source (LS) emit visible and invisible laser radiation. DO NOT look directly into the optical output port or into the fiber end when the VFL or LS is active. Direct exposure to laser light can cause severe eye damage.
- Батареянын коопсуздугу: The device contains a Lithium-Ion battery. Do not disassemble, puncture, or expose the battery to extreme temperatures or fire. Use only the provided charger.
- Экологиялык шарттар: Operate the device within specified temperature and humidity ranges. Avoid exposure to water, dust, or corrosive substances.
- Тейлөө: Refer all servicing to qualified personnel. Do not attempt to repair the device yourself.
3. Орнотуу
3.1 Пакеттин мазмуну
Пакетте бардык буюмдар бар экенин текшериңиз:
- WANLUTECH MOT-73 OTDR Multi-function Tester
- Курал баштыгы
- OTDR Test Report
- FC/UPC-FC/APC Cable
- Li-ion Battery (pre-installed)
- RJ45 to BNC Connector
- BNC Alligator Clip Cable
- Заряддагыч
- SC/UPC male to SC/APC female adapter
- Cable Tracer
- Коопсуздук картасы
- SC, FC, ST, LC Connectors
- FC to FC Connector
- FC to SC Connector
- FC (male) - LC (female) adapter
Image: Included accessories and the MOT-73 tester.
3.2 Initial Battery Preparation
Before first use, open the battery cover and remove the paper piece isolating the battery. This ensures proper electrical contact for operation and charging.
Сүрөт: Арткы view of the MOT-73 tester highlighting the battery compartment and the instruction to remove the paper piece.
3.3 Түзмөк бүттүview
Familiarize yourself with the ports and controls of the MOT-73 tester:
Сүрөт: деталдуу view of the top and bottom panels of the MOT-73, indicating ports such as Network testing port/RJ45 TDR, PSE/PoE voltage measurement, DC5V/2A power output, LED lamp, OTDR/LS, Visual Fault Locator, Optical Power Meter, Power button, 12V/1A input, Reset, and UTP/Cable tracer port.
- Жогорку панель: Network testing port / RJ45 TDR, PSE/PoE voltage measurement, DC5V/2A power output, LED lamp, OTDR/LS port, Visual Fault Locator (VFL) port, Optical Power Meter (OPM) port, Power button.
- Төмөнкү панели: 12V/1A input, Reset button, UTP / Cable tracer port.
4. Иштөө нускамалары
4.1 Жалпы навигация
The MOT-73 features a 7-inch IPS touchscreen for intuitive operation. Navigate through the various functions by tapping the corresponding icons on the main screen.
Image: The main screen of the WANLUTECH MOT-73 showing various application icons for different testing functions.
4.2 OTDR Test
The OTDR (Optical Time Domain Reflectometer) function is used to characterize optical fibers. It supports 1310nm/1550nm wavelengths with a dynamic range of 28dB/26dB. Note: This model cannot test live fiber.
Image: Screenshots illustrating the 'Quick Setup' mode for rapid configuration and 'Parameters Set' mode for detailed, professional OTDR test parameter adjustments.
- Ыкчам орнотуу режими: Allows for fast configuration of wavelength, distance range, pulse width, and measurement duration.
- Parameters Set Mode: For professional technicians, this mode enables detailed adjustment of wavelength, distance range, pulse width, measurement mode, IOR, non-reflection threshold, end threshold, and other parameters for more accurate curve results.
4.2.1 Окуялардын картасы
The Event Map visualizes fiber optic link inspections, presenting information like fiber length, connector type, fusion points, or breakpoints in an easy-to-understand graphical format. It supports saving, viewing, zooming, and moving curves for detailed analysis. Event Blind Zone is less than 1.6m, and Attenuation Blind Zone is less than 8m.
Image: The Event Map interface showing graphical representation of fiber events and the Threshold Setting menu for defining pass/fail criteria.
4.2.2 Көп багыттуу талдоо
The device supports displaying up to four OTDR curves simultaneously for comprehensive analysis, allowing for comparison of different tests or wavelengths.
Image: The multi-track analysis screen displaying four different OTDR curves for comparative evaluation.
4.3 Оптикалык кубаттуулукту өлчөөчү (OPM)
The OPM measures optical power linearly or non-linearly. It is calibrated for wavelengths 850/1300/1310/1490/1550/1625nm with a measurement range of -70 to +10 dBm.
Image: The Optical Power Meter interface showing a power reading and selectable calibrated wavelengths.
4.4 Визуалдык ката локатору (VFL)
The VFL helps determine fiber continuity and locate faults. It operates at a 650nm wavelength with a maximum test range of 8 KM. Warning: Visible light source. Do not look directly at the light to avoid eye contact.
Image: The Visual Fault Locator interface displaying a warning about laser light and options for steady or modulated output.
4.5 Жарык булагы (LS)
The LS function provides a stable light source for engineering and maintenance of optical fiber communication and CATV fiber parameter setting. It supports CW/270 Hz/330 Hz/1 kHz/2 kHz modulation modes at 1310nm/1550nm.
Image: The Light Source interface showing wavelength selection, mode options (CW, 270Hz, 330Hz, 1kHz, 2kHz), and power adjustment.
4.6 Optical Loss Test (OLT)
The OLT function is used to test the insertion loss of optical passive devices. Connect the OTDR/LS port and OPM port with short fiber optic patch cables. After the power stabilizes, click "Set Parameter" and then connect the device under test.
Image: The Optical Loss Test interface displaying optical power meter readings and relative power, with options to set parameters and view connection diagrams.
4.7 Cable Tracer & Cable Tester
The Cable Tracer function helps locate BNC, network, and telephone cables within cluttered bundles, including shielded cables. The Cable Tester function checks UTP cable connection status and displays near-end, mid-end, and far-end fault points.
Image: Illustrations of the Cable Tracer in use for identifying cables and the Cable Tester interface showing connection status and fault locations.
4.8 RJ45 кабелинин TDR сыноосу
This function tests cable pair status, length (up to 180 meters), attenuation (for network cables exceeding 10 meters), reflectivity, impedance, and skew.
Image: The RJ45 Cable TDR Test interface displaying cable pair status, length, and advanced test results for reflectivity, impedance, and skew.
4.9 Кабелдин узундугун текшерүү
Measure the breakpoint position (open circuit status) for BNC cables, RJ45 network cables, and RJ11 cables, with a maximum test length of 3000 meters. Note that short-circuit status will not display cable length.
Image: The Cable Length Test interface showing graphical representation of cable pairs and their measured lengths.
4.10 Тармак куралдары
The MOT-73 includes various network testing tools:
- Пинг тести: Tests connectivity and response time to IP cameras or other network devices.
- IP сканерлөө: Quickly finds IP addresses, MAC addresses, and camera manufacturers of devices connected to the tester.
- FTP Serve: Allows copying and editing files from the SD card without using an SD card reader.
- LLDP: Detects capabilities, management IP addresses, device info, port info, and other switch information (requires LLDP protocol support on the switch).
- Жаркылдаган порт: Connects to the LAN port to flash the port LED on a switch, helping to quickly identify connected cables.
- PPPOE: Used to detect if broadband PPPOE dialing is normal.
- Link Monitor: Monitors network link status.
Image: Screenshots of various network tools including Ping, IP Scan, FTP Serve, LLDP, Port Flashing, and PPPOE.
4.11 WiFi анализатору
Supports analysis of WiFi signal strength, channel, and level. It can also create a WiFi hotspot.
Image: The WiFi Analyzer interface showing signal strength and channel charts, alongside the PoE Detection interface.
4.12 PoE аныктоо
PoE которгучун же PSE кубат булагынын көлөмүн өлчөйтtage and cable connection status. The power supply port of the PoE switch or PSE power supply equipment must be connected to the PSE In port of the OTDR tester.
Image: The PoE Detection interface displaying power supply voltage and cable connection status for PoE devices.
4.13 File Management & Test Reports
The device allows saving test curves and event lists. Test reports can be generated in EXCEL and PDF formats, including curve trajectory graphs, parameter settings, fiber event information, and fiber link information. The SOR standard file формат колдоого алынат.
Image: Screenshots showing the Test Report generation, File Setting options for automatic naming and format, and the File Management interface for viewing and organizing saved test data.
4.14 TesterPlay (Screen Projection)
The "TesterPlay" app supports displaying the tester's screen on a PC or mobile phone simultaneously. Install the "TesterPlay" app on Android mobile phones or VLC player on PC to receive real-time screen information from the tester. The RTSP stream can be accessed at rtsp://192.168.0.130:554/v0 (IP address may vary).
Image: The TesterPlay feature demonstrating screen projection from the MOT-73 to a PC and an Android mobile phone.
5. Техникалык тейлөө
Proper maintenance ensures the longevity and accuracy of your WANLUTECH MOT-73 tester.
- Тазалоо: Use a soft, dry cloth to clean the device's exterior. For the touchscreen, use a screen-specific cleaning solution and a microfiber cloth. Keep optical ports clean using appropriate fiber optic cleaning tools.
- Сактагыч: Store the device in its protective tool bag in a cool, dry place away from direct sunlight and extreme temperatures.
- Батареяга кам көрүү: For long-term storage, charge the battery to approximately 50% and recharge every 3-6 months to prevent deep discharge.
- Программалык камсыздоо жаңыртуулары: Өндүрүүчүнү текшериңиз webоптималдуу иштешин жана жаңы функцияларга жетүүнү камсыз кылуу үчүн прошивка жаңыртуулары үчүн сайт.
6. Кыйынчылыктарды
This section addresses common issues you might encounter with your MOT-73 tester.
| Көйгөй | Мүмкүн себеп | Чечим |
|---|---|---|
| Түзмөк күйбөйт. | Battery not charged or paper insulator still present. | Ensure battery is charged. Remove the paper insulator from the battery compartment. |
| OTDR test results are inaccurate. | Incorrect parameters set or dirty optical connectors. | Verify OTDR parameters in 'Parameters Set Mode'. Clean all optical connectors thoroughly. |
| VFL/LS light is weak or absent. | Dirty optical port or device malfunction. | Clean the VFL/LS optical port. If the issue persists, contact support. |
| Cable Tester shows incorrect results. | Poor cable connection or damaged cable. | Ensure cables are properly seated. Inspect cables for damage. |
| Network tools not functioning. | Incorrect network configuration or cable connection. | Verify network cable connections. Check IP settings and ensure target devices are online. |
7. Техникалык шарттар
Key technical specifications for the WANLUTECH MOT-73 Optical Fiber Tester:
- Модель номери: MOT-73
- OTDR Wavelength: 1310нм/1550нм
- OTDR Dynamic Range: 28dB / 26dB
- Event Blind Zone: <1.6 м
- Attenuation Blind Zone: <8 м
- Optical Power Meter Calibrated Wavelengths: 850/1300/1310/1490/1550/1625nm
- VFL Wavelength: 650нм
- VFL Max Test Range: 8 км
- Light Source Modes: CW/270 Hz/330 Hz/1 kHz/2 kHz
- Дисплей: 7 дюймдук IPS сенсордук экраны
- Батарея: 7.4V 7800 mAh Lithium Ion (included)
- Ethernet порттору: Dual Gigabit (10/100/1000Mbps adaptive)
- WiFi: Built-in 2.4G, 150M speeds, WiFi analyzer
- PoE Detection: Ооба
- Кубат киргизүү: DC12V/1A
- Чыгуу кубаттуулугу: DC5V/2A
- RJ45 Cable TDR Test Length: Макс 180 метр
- Cable Length Test (BNC, RJ45, RJ11): Макс 3000 метр
- Процессор: 1.6GHz 4-cores CPU
- Эстутум: 1GB RAM, 8GB FLASH (eMMC)
- Пакеттин өлчөмдөрү: 11.22 x 9.45 x 3.74 дюйм
- Элемент Салмагы: 3.97 фунт
Image: The 7-inch touchscreen display and internal hardware specifications including CPU, RAM, and Flash memory.
8. Кепилдик жана колдоо
WANLUTECH is committed to providing quality products and customer support.
- Өндүрүүчү: GUANGZHOU WANGLU TECHNOLOGY CO.,LTD
- Колдоо: For any questions or technical assistance, please contact WANLUTECH customer support. You can typically find support options through your purchase platform or the official WANLUTECH webсайт.
- Колдоо кызматы менен байланышуу: If purchased via Amazon, you can find your order on your Amazon account, view order details, and click 'get product support' to message the seller. Alternatively, locate 'WANGLU TESTER' on the product detail page and use the messaging option.
