1. Киришүү
The Axial UTB18 Capra 1/18 4WD RTR is a high-performance, ready-to-run remote control rock crawler designed for exceptional off-road capability. This manual provides essential information for setting up, operating, and maintaining your vehicle to ensure optimal performance and longevity.
Негизги өзгөчөлүктөрү:
- Capra performance in a smaller 1/18 scale size.
- Spektrum radio, electronics, LiPo battery, and USB charger included.
- Proven Capra tube chassis and 4-link suspension.
- Fully ready-to-run – includes everything needed.
- Portal axles for maximized ground clearance.
Кутуда эмне бар:
- UTB18 Capra 1/18 4WD RTR, Grey
2. Коопсуздук боюнча маанилүү маалымат
ЭСКЕРТҮҮ: Иштетүүдөн мурун продуктунун өзгөчөлүктөрү менен таанышып чыгуу үчүн колдонмону ТОЛУГУ МЕНЕН окуп чыгыңыз. Продукцияны туура эмес иштетсеңиз, продуктуга, жеке мүлккө зыян келтирип, олуттуу жаракат алышыңыз мүмкүн.
Бул татаал хобби продуктусу. Аны этияттык жана акылдуулук менен иштетүү керек жана бир аз негизги механикалык жөндөмдү талап кылат. Бул продуктуну коопсуз жана жоопкерчиликтүү түрдө иштетпөө жаракат алууга же продуктуга же башка мүлккө зыян келтирүүгө алып келиши мүмкүн. Бул продукт чоңдордун түздөн-түз көзөмөлүсүз балдар тарабынан колдонуу үчүн арналган эмес. Horizon Hobby, LLC тарабынан берилген көрсөтмөлөрдөн тышкары, шайкеш келбеген компоненттер менен колдонбоңуз же бул продуктуну эч кандай жол менен өзгөртпөңүз. Продукциянын колдонмосунда коопсуздук, иштетүү жана техникалык тейлөө боюнча көрсөтмөлөр камтылган. Туура иштөө жана бузулуудан же олуттуу жаракат алуудан сактануу үчүн, чогултуудан, орнотуудан же колдонуудан мурун колдонмодогу бардык көрсөтмөлөрдү жана эскертүүлөрдү окуп чыгуу жана аткаруу маанилүү.
3. Орнотуу жана баштапкы даярдоо
Before operating your Axial UTB18 Capra, ensure all components are properly prepared and connected.
3.1 Батареяны заряддоо
The vehicle includes a LiPo battery and a USB charger. Connect the charger to a compatible USB power source and then connect the battery. Follow the charger's instructions for safe charging. Always supervise charging and disconnect once fully charged.
3.2 Контролёрду даярдоо
The Spektrum radio controller requires batteries (not included). Insert the required batteries into the controller. Ensure the controller is powered on before turning on the vehicle.
3.3 Connecting the Vehicle Battery
Carefully connect the charged LiPo battery to the vehicle's power connector. Secure the battery within its compartment to prevent movement during operation.


3.4 Визуалдык кошумчаview жана өзгөчөлүктөрү
For a detailed visual guide on the product's features and initial setup, please refer to the official product overview төмөндөгү видео.
Видео 3.1: Продукт бүттүview Video. This video provides an unboxing experience and highlights the main features of the Axial UTB18 Capra, including its ready-to-run components and design.
4. Operating Your Axial UTB18 Capra
The Axial UTB18 Capra is designed for superior rock crawling. Familiarize yourself with the controls and vehicle capabilities before tackling challenging terrain.
4.1 Негизги башкаруу каражаттары
- Муунткуч: Use the trigger on the Spektrum radio to control forward and reverse movement.
- Башкаруу: Use the steering wheel on the Spektrum radio to control left and right turns. The Capra features precise front and rear steering for enhanced maneuverability.
4.2 Айдоо боюнча кеңештер
- Жай жана туруктуу: For optimal rock crawling, use slow and controlled throttle inputs.
- Utilize Steering: Experiment with the front and rear steering to navigate tight spots and overcome obstacles.
- Observe Suspension: The 4-link suspension and oil-filled shocks allow for significant articulation. Observe how the vehicle's suspension reacts to terrain to anticipate its next move.
- Portal Axles: The portal axles provide increased ground clearance, allowing the vehicle to pass over larger obstacles without getting hung up.


4.3 Өркүндөтүлгөн операция
The following video demonstrates the Axial UTB18 Capra in action, showcasing its capabilities on various terrains.
Видео 4.1: Axial RC Truck UTB18 Capra in action. This video highlights the vehicle's robust performance and maneuverability over diverse off-road obstacles.
5. Техникалык тейлөө
Regular maintenance is crucial for keeping your Axial UTB18 Capra in top condition.
5.1 Тазалоо
- After each use, especially in dirty or wet conditions, clean the vehicle thoroughly. Use a soft brush or compressed air to remove dirt and debris from the chassis, suspension, and drivetrain.
- Avoid using harsh chemicals or excessive water directly on electronics.
5.2 Компоненттерди текшерүү
- Screws and Fasteners: Periodically check all screws and fasteners for tightness. Vibrations during operation can loosen them.
- Токтотуу: Inspect the shocks for leaks or damage. Ensure the 4-link suspension moves freely.
- Шиналар жана дөңгөлөктөр: Check tires for wear and tear. Ensure wheels are securely attached.
- Жүргүзүүчү поезд: Inspect gears and driveshafts for any signs of wear or damage.



6. Кыйынчылыктарды
This section addresses common issues you might encounter with your Axial UTB18 Capra.
6.1 Vehicle Not Responding / No Power
- Батареяны текшерүү: Ensure the vehicle's LiPo battery is fully charged and properly connected.
- Контроллердин батареялары: Verify that the radio controller has fresh batteries and is powered on.
- Байланыштары: Double-check all electrical connections within the vehicle, including the battery, motor, and receiver.
- Байлоо: Ensure the vehicle and controller are properly bound. Refer to the Spektrum radio manual for binding procedures if necessary.
6.2 Руль менен башкаруудагы көйгөйлөр
- Servo Function: Check if the steering servo is moving freely and not obstructed by debris.
- Linkages: Ensure all steering linkages are securely attached and not bent or damaged.
- Trim Settings: Adjust the steering trim on your controller to ensure the wheels are straight when the steering wheel is centered.
6.3 Motor / Drivetrain Issues
- Тоскоолдуктар: Check for any foreign objects caught in the gears or driveshafts.
- Тиштүү тор: Ensure the motor pinion gear and spur gear have proper mesh.
- Мотор туташуусу: Verify the motor wires are securely connected to the Electronic Speed Controller (ESC).
7. Техникалык шарттар
| Продукциянын өлчөмдөрү | 17.1 x 8.1 x 9.3 дюйм |
| Элемент Салмагы | 3.95 фунт |
| Элемент моделинин номери | AXI01002V2T2 |
| Өндүрүүчүнүн сунуш кылган курагы | 14 жаш жана андан жогору |
| Батареялар | 1 стандарттуу эмес батарейка талап кылынат (кошулган) |
| Өндүрүүчү | Горизонт хобби |
8. Кепилдик жана колдоо
For warranty information, technical support, or replacement parts, please contact the manufacturer directly.
Өндүрүүчү: Горизонт хобби
Refer to the official Horizon Hobby webЭң акыркы байланыш маалыматы жана кепилдик чоо-жайы үчүн сайтка же продуктунун таңгагына кайрылыңыз.





