Timex Expedition North Anchorage 43mm Watch User Manual

Introduction

This manual provides comprehensive instructions for the proper setup, operation, and maintenance of your Timex Expedition North Anchorage 43mm Watch. Please read this guide thoroughly to ensure optimal performance and longevity of your timepiece.

Сүрөт: алдыңкы view of the Timex Expedition North Anchorage 43mm Watch, showcasing its black dial, luminous markers, date window with magnifier, rotating bezel, and stainless steel bracelet.

Жайгашуу

1. Кутудан чыгаруу жана алгачкы текшерүү

Upon receiving your watch, carefully remove it from its packaging. Inspect the watch for any visible damage. Ensure all protective films are removed from the crystal and case back.

2. Убакытты жана датаны орнотуу

Your Timex Expedition North Anchorage watch features a screw-down crown for enhanced water resistance. To adjust the time or date, you must first unscrew the crown.

1. Таажыны бурап чыгарыңыз: Gently rotate the crown counter-clockwise until it springs free from the case.
2. Датаны коюу: Pull the crown out to the first click position. Rotate the crown clockwise or counter-clockwise (depending on the movement) to adjust the date. Avoid setting the date between 9 PM and 3 AM, as this can interfere with the automatic date change mechanism.
3. Убакытты коюу: Pull the crown out to the second click position. The second hand will stop. Rotate the crown to move the hour and minute hands to the correct time. Push the crown back to the first click position to restart the second hand.
4. Таажыны камсыз кылуу: Once the time and date are set, push the crown fully back into the case and then screw it clockwise until it is firmly tightened against the case. This ensures the watch's water resistance.

Сүрөт: Side profile of the watch, highlighting the textured screw-down crown and the robust stainless steel case.

3. Билерикти тууралоо

The stainless steel bracelet can be adjusted to fit your wrist. This typically involves removing or adding links. It is recommended to have this adjustment performed by a qualified jeweler or watch technician to prevent damage to the bracelet or clasp.

Сүрөт: View of the watch's stainless steel bracelet and the deployment clasp, which features the Timex logo.

Саатыңызды иштетүү

1. Reading the Time and Date

The watch displays time with hour, minute, and second hands. The date is shown in a window at the 3 o'clock position, magnified by a cyclops lens for improved readability.

2. Using the Rotating Bezel

The unidirectional rotating bezel can be used to measure elapsed time. Align the bezel's zero marker with the minute hand at the start of an event. The minute hand will then point to the elapsed time on the bezel's scale.

3. Сууга туруктуулук

This watch is water resistant up to 200 meters (660 feet). This rating makes it suitable for recreational swimming, snorkeling, and diving. Always ensure the crown is fully screwed down before exposing the watch to water.

• Маанилүү: Do not operate the crown or pushers (if present) while the watch is submerged or wet.
• Rinse the watch with fresh water after exposure to salt water or chlorinated water.

Техникалык тейлөө

1. Саатыңызды тазалоо

Саатыңызды тазалоо үчүн, корпусун жана билерикти жумшак, d менен сүртүңүзamp cloth. For stainless steel bracelets, a mild soap solution can be used, followed by a thorough rinse with fresh water and drying with a soft cloth. Avoid harsh chemicals or abrasive materials.

2. Батареяны алмаштыруу

The watch is powered by a Lithium Metal battery. When the battery needs replacement, it is highly recommended to have this service performed by an authorized Timex service center or a professional watchmaker. This ensures the proper sealing and maintenance of the watch's water resistance.

Сүрөт: деталдуу view of the watch's stainless steel case back, featuring engraved product information and the Expedition North logo.

3. Water Resistance Seal Check

Over time, the gaskets that ensure water resistance can degrade. It is advisable to have the water resistance seals checked annually by a professional, especially if the watch is frequently exposed to water.

Проблемаларды чечүү

• Watch Not Running:

  Ensure the crown is fully pushed in and screwed down. If the watch still does not run, the battery may need replacement. Consult a professional watchmaker.

• Date Not Changing Correctly:

  Check if the time was set during the restricted period (9 PM - 3 AM). Adjust the time past 3 AM and then reset the date. Ensure the crown is fully engaged in the date-setting position.
• Moisture Under Crystal:

  If you notice condensation or moisture inside the watch, immediately take it to an authorized service center. This indicates a breach in water resistance and requires prompt attention to prevent damage to the movement.

Техникалык шарттар

Кепилдик жана колдоо

Your Timex watch is covered by a manufacturer's warranty against defects in materials and workmanship. For specific warranty terms, registration, and to locate an authorized service center, please refer to the warranty card included with your purchase or visit the official Timex webсайт.

For further assistance or inquiries, please contact Timex customer support through their official channels.

Расмий Таймс Webсайт: www.timex.com