OMTech 100W CO2 лазердик гравёру (SH-G570 модели) боюнча колдонмо

1. Киришүү

This manual provides essential information for the safe and efficient operation of your OMTech 100W CO2 Laser Engraver, Model SH-G570. Please read this manual thoroughly before operating the machine to ensure proper usage and to prevent damage or injury.

The OMTech 100W CO2 Laser Engraver is designed for precision cutting and engraving of various non-metallic materials such as acrylic, wood, and glass. It features a 20x28 inch work area, 4-way pass-through, integrated air assist, and a water pump for cooling.

Сүрөт 1.1: Алдыңкы view of the OMTech 100W CO2 Laser Engraver.

2. Коопсуздук маалыматы

Operating a laser engraver involves inherent risks. Adhere to all safety precautions to prevent accidents and ensure safe operation.

• Лазердик нурлануу: This is a Class 2 laser product with 0.827 mW output power. Never look directly into the laser beam or its reflection. Always use appropriate laser safety eyewear.
• Вентиляция: Ensure adequate ventilation to remove smoke and fumes generated during laser processing. The integrated air assist system helps, but additional room ventilation may be required.
• Өрт коркунучу: Certain materials can ignite during laser processing. Never leave the machine unattended during operation. Keep a fire extinguisher nearby.
• Электр коопсуздугу: Машинанын жерге туура туташтырылганын текшериңиз. Нымдуу кол менен жеamp conditions. Disconnect power before performing any maintenance.
• Муздатуу системасы: The water pump maintains the laser tube's temperature. Ensure the water level is adequate and the pump is functioning correctly before operation.
• ViewТерезе: Отко чыдамдуу зат viewing window allows for safe observation of the engraving process.
• Шашылыш токтотуу: Авариялык токтотуу баскычынын жайгашкан жери жана иштеши менен таанышыңыз.
• Сырсөздү коргоо: Utilize the machine's password protection feature to prevent unauthorized use.

Image 2.1: The flame-retardant viewing window allows for safe observation of the engraving process.

3. Орнотуу

3.1 Пакеттен чыгаруу жана жайгаштыруу

1. Carefully remove the laser engraver from its packaging.
2. Place the machine on a stable, level surface capable of supporting its weight (251 lb). Ensure sufficient space around the machine for ventilation and access.
3. Install the included wheels for mobility, if desired.

3.2 Туташтыруучу компоненттер

• Кубат туташуу: Электр кабелин жерге туташтырылган электр розеткасына туташтырыңыз.
• Суу насосу: Connect the water pump to the laser cooling system as per the diagram provided in the quick start guide. Ensure the water reservoir is filled with distilled water.
• Аба жардам: Connect the air assist hose. This system helps clear debris and smoke from the engraving area.
• Чыгаруу системасы: Connect the exhaust fan and ducts to properly vent fumes outside.
• Маалымат байланышы: Connect the machine to your computer using a USB cable or Ethernet cable. Alternatively, use a USB flash drive for offline operation.

Сүрөт 3.1: Бүттүview of included components for setup, such as the exhaust system and cables.

4. Иштөө нускамалары

4.1 Күйгүзүү жана алгачкы текшерүүлөр

1. Ensure all connections are secure and the water pump is running.
2. Негизги өчүргүчтү күйгүзүңүз.
3. The control panel will illuminate. Enter your password if prompted.

4.2 Материалды жайгаштыруу жана фокустоо

• Place your material on the honeycomb workbed.
• For this manual focus model, adjust the workbed height or laser head manually to achieve the optimal focal distance. Refer to the quick start guide for specific instructions on manual focusing.
• Utilize the 4-way pass-through doors for oversized materials. The front-rear pass-through supports materials up to 31.5" x 3.94", and left-right supports up to 19.69" x 0.79".

Image 4.1: Laser head positioned over material on the honeycomb workbed.

4.3 Software and Job Preparation

The OMTech 100W CO2 Laser Engraver is compatible with various software, including LightBurn, CorelDRAW, and AutoCAD. Prepare your design file in your preferred software.

• Import your design into the laser control software.
• Set appropriate power and speed settings for your material. The machine supports engraving speeds up to 600 mm/s.
• Use the "Frame" function on the control panel to preview the job area and ensure correct material placement.

Image 4.2: The machine's control panel for operation and settings.

4.4 Starting the Engraving/Cutting Process

1. Once settings are confirmed, send the job to the laser engraver.
2. Press the "Start/Pause" button on the control panel to begin the process.
3. Monitor the process through the flame-retardant viewтерезе.
4. In case of an emergency, press the emergency stop button immediately.

Image 4.3: The laser engraver actively processing a design on wood.

5. Техникалык тейлөө

Үзгүлтүксүз техникалык тейлөө оптималдуу иштөөнү камсыз кылат жана лазердик гравёруңуздун иштөө мөөнөтүн узартат.

• Оптиканы тазалоо: Regularly clean the laser lenses and mirrors to maintain engraving quality. Refer to the detailed cleaning instructions in the full manual.
• Суу муздатуу системасы: Check and maintain the water level in the cooling system. Replace the water periodically (e.g., every 1-2 months) with distilled water to prevent algae growth and mineral buildup.
• Жумушчу төшөктү тазалоо: Clean the honeycomb workbed regularly to remove debris and residue. The anti-scorch plate can be removed for easier cleaning.
• Аба жардам берүүчү сопло: Ensure the air assist nozzle is clear of obstructions to maintain effective smoke and debris removal.
• Майлоо: Periodically lubricate the guide rails and moving parts as recommended in the full manual.

Image 5.1: Detail of the laser head and air assist nozzle, which requires regular cleaning.

6. Кыйынчылыктарды

Бул бөлүмдө сиз иштөө учурунда кабылышы мүмкүн болгон жалпы маселелер каралат.

For more detailed troubleshooting, refer to the complete user manual or contact OMTech customer support.

7. Техникалык шарттар

• Модел: SH-G570
• Лазердик күч: 100W CO2
• Иштөө аймагы: 20" x 28" (508 мм x 711 мм)
• Макс. Гравюра ылдамдыгы: 600 мм/с
• Max. Cutting Thickness (Acrylic): 0.98 дюймга (25 мм) чейин
• Max. Cutting Thickness (Wood): 0.59 дюймга (15 мм) чейин
• Pass-Through (Front-Rear): 31.5" x 3.94"
• Pass-Through (Left-Right): 19.69" x 0.79"
• Machine Өлчөмдөрү: 64.96" x 34.25" x 36.61" (165см x 87см x 93см)
• Элемент Салмагы: 251 фунт (113.8 кг)
• Лазердик класс: 2
• Чыгуу күчү: 0.827 мВт
• Маалыматтарды өткөрүү: USB Cable, Ethernet Cable, USB Flash Drive (Offline)
• Муздатуу: Суу насосу
• Аба жардам: Интеграцияланган

Image 7.1: Visual representation of the machine's key specifications.

8. Кепилдик жана колдоо

OMTech provides comprehensive customer service and support for your laser engraver.

• Кепилдик: The product comes with 2 years of comprehensive support.
• Кардарларды тейлөө: A 24-hour support team is available across the U.S., the Philippines, and China.
• Техникалык колдоо: Professional pre-sales and after-sales service, along with technical support, are provided.
• Demo Room Program: Over 60 demo room hosts are available in the U.S. for on-site experiences by appointment.

For assistance, please refer to the contact information provided with your product or visit the official OMTech webсайт.

Image 8.1: Map illustrating the widespread availability of OMTech demo rooms for customer support.