Introduction
This manual provides instructions for the safe installation, operation, and maintenance of your Maxxima 2-inch Ultra-Thin Recessed Anti-Glare LED Downlight, Model MRL-S20803SBW. This fixture is designed for residential and commercial indoor applications, offering adjustable color temperature and dimming capabilities. Please read these instructions thoroughly before installation and retain them for future reference.
Коопсуздук маалыматы
ЭСКЕРТҮҮ: ЭЛЕКТР ТОГУНА ЧЫГУУ КОРКУНУЧУ. ОРНОТУУДАН ЖЕ ТЕЙЛӨӨДӨН АЛДЫН, ЧЕКТЕРДИ ӨЧҮРГҮЧТӨГҮ ЭЛЕКТР КУБАТЫНАН АЖЫРАТЫҢЫЗ.
- All electrical connections must be in accordance with local and National Electrical Code (NEC) standards. Consult a qualified electrician if you are unfamiliar with proper electrical wiring connections.
- This fixture is intended for installation in ceilings only.
- Жабдууну өзгөртпөңүз же аны максатынан башка максаттарда колдонбоңуз.
- камсыз кылуу voltage 120VAC.
- This product is IC Rated, suitable for direct contact with insulation.
- Бул прибор Дamp Rated, suitable for use in bathrooms and kitchens where moisture may be present.
Пакеттин мазмуну
Орнотууну баштоодон мурун бардык компоненттер бар экендигин текшериңиз:
- 1 x Maxxima 2-inch Square LED Downlight Fixture (White Trim, Black Baffle)
- 1 x Remote Junction Box with Integrated CCT Selectable Switch
- 1 x Foam Gasket (pre-attached or included)
This image displays the complete Maxxima 2-inch square LED downlight unit, including the main fixture with its white trim and deep-set black baffle, and the connected external junction box.
Орнотуу жана орнотуу
Туура орнотуу үчүн бул кадамдарды аткарыңыз:
Керектүү куралдар:
- Wire Strippers
- Бурагыч (Phillips жана Flathead)
- Hole Saw or Template (2.5-inch diameter)
- Өлчөө лентасы
Орнотуу кадамдары:
- Кубатты өчүрүү: Locate the circuit breaker controlling the area where the downlight will be installed and turn off the power. Verify power is off using a voltage сыноочу.
- Prepare Ceiling Opening: Using a 2.5-inch hole saw or template, cut a circular opening in the ceiling at the desired location. Ensure there are no obstructions (e.g., joists, pipes) behind the cutting area.
- Кирүү түйүнү кутусу: Open the cover of the remote junction box.
- Зым байланыштары: Connect the household electrical wires to the junction box wires. Use appropriate wire connectors (not included) to secure the connections:
- Connect the black (Live) wire from the supply to the black wire of the junction box.
- Connect the white (Neutral) wire from the supply to the white wire of the junction box.
- Connect the green or bare copper (Ground) wire from the supply to the green wire of the junction box.
This image displays the interior of the junction box with its cover open, revealing the wiring terminals for electrical connections (black, white, green) and the prominent 5 CCT selector switch.
- Түс температурасын тандоо (CCT): Before closing the junction box, use the switch located on the side of the junction box to select your desired color temperature (2700K, 3000K, 3500K, 4000K, or 5000K).
Чоңойтулган view of the 5 CCT switch on the side of the junction box, clearly showing the selectable color temperature options: 2700K, 3000K, 3500K, 4000K, and 5000K.
This image illustrates the key feature of 5 CCT (Correlated Color Temperature) selection. It shows the downlight fixture alongside a magnified view of the switch located on the junction box, indicating options for 2700K (Soft White), 3000K (Warm White), 3500K (Bright White), 4000K (Neutral White), and 5000K (Daylight).
- Secure Junction Box: Close the junction box cover and secure it. Place the junction box into the ceiling cavity, ensuring it is not pinched or stressed.
- Арматураны Junction Box менен туташтыруу: Connect the male connector from the downlight fixture to the female connector on the junction box's installation cord. Ensure a secure connection.
- Insert Downlight Fixture: Gently push the spring-loaded clips on the sides of the downlight fixture upwards and insert the fixture into the ceiling opening. Release the clips to secure the fixture flush against the ceiling. The foam gasket will help create a tight seal.
арткы view of the Maxxima 2-inch square LED downlight, revealing the heat sink fins for thermal management and the spring-loaded clips used for securing the fixture in the ceiling.
- Күчтү калыбына келтирүү: Арматура бекем орнотулгандан кийин, автоматтык өчүргүчтөгү кубаттуулукту калыбына келтириңиз.
A lifestyle image demonstrating several Maxxima 2-inch square LED downlights seamlessly integrated into the ceiling of a contemporary kitchen and living space, providing ambient lighting.
Иштөө нускамалары
Your Maxxima LED Downlight is designed for simple operation:
- Күйгүзүү/өчүрүү: The downlight is controlled by a standard wall switch connected to the electrical circuit.
- алсыздатуу: This fixture is compatible with most standard LED dimmers, allowing for a dimmable range of 20% to 100%. Ensure your dimmer is compatible with LED lighting for optimal performance.
- Түс температурасын тандоо: The color temperature (CCT) is set using the switch on the junction box during installation. It cannot be changed without accessing the junction box.
A detailed close-up of the Maxxima 2-inch square LED downlight after installation, showing the white trim flush with the ceiling and the black baffle housing the illuminated LED.
Техникалык тейлөө
The Maxxima LED Downlight requires minimal maintenance:
- Тазалоо: To clean the fixture, ensure power is off. Wipe the surface with a soft, dry, or slightly damp кездеме. Абразивдүү тазалагычтарды, эриткичтерди же катуу химиялык заттарды колдонбоңуз, анткени алар финишке же электрдик тетиктерге зыян келтириши мүмкүн.
- Колдонуучу тейлей турган бөлүктөр жок: The LED light source is integrated and not replaceable. Do not attempt to open or repair the fixture.
Проблемаларды чечүү
Эгерде сиз жарыктандыргычыңыз менен көйгөйлөргө туш болсоңуз, төмөнкү кеңири таралган көйгөйлөрдү жана чечимдерди караңыз:
| Көйгөй | Мүмкүн себеп | Чечим |
|---|---|---|
| Жарык күйбөйт. | Шайманга күч жок. Бошогон зымдар байланышы. Incorrect CCT switch setting. | Ажыраткычты жана дубалды өчүргүчтү текшериңиз. Verify all wire connections in the junction box are secure (ensure power is off first). Confirm CCT switch on junction box is set to a valid position. |
| Жарык ыраатсыз жылтылдап же күңүрттөйт. | Шайкеш келбеген диммер которгучу. Бошогон зымдар байланышы. | LED менен шайкеш келген жарыкты өчүргүчтү колдонуп жатканыңызды текшериңиз. Бардык зым туташууларын текшериңиз (электр өчүрүлгөн учурда). |
| Туура эмес түс температурасы. | CCT которгучу туура эмес коюлган. | Access the junction box (power off) and adjust the CCT selection switch to the desired setting. |
Техникалык шарттар
| Өзгөчөлүк | Спецификация |
|---|---|
| Бренд | Maxxima |
| Модель номери | MRL-S20803SBW |
| Энергияны керектөө | 9 Ватт |
| Жарыктык | 500 Lumens |
| Киргизүү көлөмүtage | 120VAC |
| Түс температурасы (CCT) | 2700K / 3000K / 3500K / 4000K / 5000K Selectable |
| Түстөрдү көрсөтүү индекси (CRI) | 90 |
| Диминг диапазону | 20% - 100% (with compatible LED dimmer) |
| Fixture Dimensions (L x W x H) | 3.16" x 3.16" x 2.6" |
| Junction Box Dimensions (H x W x D) | 1.25" x 3.4" x 3.4" |
| Recommended Hole Cutout | 2.5 дюйм |
| Материал | Алюминий |
| Бүтүрүү | White Trim, Black Baffle |
| Сертификаттар | ETL Listed, IC Rated |
| Экологиялык рейтинг | Damp Rated (Indoor Use) |
| Beam Spread | 36° |
| Элемент Салмагы | 10.72 унция |
A technical diagram illustrating the physical dimensions of the Maxxima 2-inch square LED downlight, with measurements of 3.16 inches in length, 3.16 inches in width, and 2.6 inches in height.
Кепилдик жана колдоо
This Maxxima LED Downlight is backed by a 3 жылдык кепилдик сатып алынган күндөн тартып, нормалдуу пайдаланууда материалдардын жана жасалгалоонун кемчиликтерин жабуу.
For technical assistance, warranty claims, or product inquiries, please contact Maxxima customer service. Refer to the product packaging or the official Maxxima webучурдагы байланыш маалыматы үчүн сайт.
