ABUS AZAA10000 Terxon SX Alarm Control Panel User Manual

1. Киришүү

This manual provides essential information for the installation, operation, and maintenance of your ABUS AZAA10000 Terxon SX Alarm Control Panel. Please read these instructions carefully before attempting to install or operate the system to ensure proper functionality and safety.

The ABUS AZAA10000 Terxon SX is a wired alarm control panel designed to provide reliable security for your premises. It integrates various security components to detect intrusions and alert users.

2. Коопсуздук маалыматы

• Электр коопсуздугу: Installation and wiring should only be performed by qualified personnel. Disconnect power before servicing the unit.
• Батарея менен иштөө: The system uses a lead-acid battery. Handle with care. Do not short-circuit, puncture, or expose to extreme temperatures. Dispose of batteries according to local regulations.
• Экологиялык шарттар: Install the control panel in a dry, protected area, away from direct sunlight, extreme temperatures, and high humidity.
• Уруксат берилген колдонуу: Use the system only for its intended purpose as an alarm control panel.

3. Пакеттин мазмуну

Пакетте бардык компоненттер бар экенин текшериңиз:

• ABUS AZAA10000 Terxon SX Сигнал башкаруу панели
• Keypad (LCD control panel)
• Орнотуу жабдуулары (бурамалар, бекиткичтер)
• Колдонуучунун Колдонмосу (бул документ)
• Электр кабели/адаптер
• Lead-acid battery (may be pre-installed or separate)

4. Продукт бүтүп калдыview

The ABUS AZAA10000 Terxon SX system consists of a main control panel unit and a separate LCD keypad for user interaction.

1-сүрөт: ABUS AZAA10000 Terxon SX Alarm Control Panel (right) and LCD Keypad (left). The control panel houses the main electronics and battery, while the keypad provides the interface for arming, disarming, and system configuration.

2-сүрөт: Башка view of the ABUS AZAA10000 Terxon SX Alarm Control Panel and LCD Keypad, highlighting the compact design of the keypad for discreet placement.

4.1 Башкаруу панели

The main control panel unit is the central processing unit of the alarm system. It manages all connected sensors, communicates with the keypad, and triggers alarms. It typically includes terminals for wired connections, a power input, and a compartment for the backup battery.

4.2 ЖК баскычтоп

The LCD keypad serves as the primary user interface. It features a display for status messages, a numeric keypad for entering codes, and function buttons for arming, disarming, and accessing system menus. Compatible devices include the LCD control panel, relay board, and optional plug-in relay module.

5. Орнотуу жана орнотуу

Proper setup and installation are crucial for the reliable operation of your alarm system. It is recommended that installation be performed by a certified security technician.

5.1 Башкаруу панелин орнотуу

1. Жайгашкан жерди тандоо: Choose a secure, discreet, and centrally located area, preferably indoors, away from extreme temperatures and moisture. Ensure it is accessible for maintenance but not easily tampменен жасалган.
2. Коопсуз орнотуу: Use appropriate screws and anchors (type: screw-in) to firmly attach the control panel to a wall. Ensure the mounting surface can support the unit's weight (2.8 kg).

5.2 Баскычтопту орнотуу

1. Жайгашкан жерди тандоо: Install the keypad near the main entry/exit point of the protected area, at a convenient height for all users.
2. Коопсуз орнотуу: Mount the keypad securely to the wall using the provided hardware.

5.3 Зымдарды туташтыруу

The ABUS AZAA10000 Terxon SX is a wired system. All connections (sensors, sirens, power, keypad) must be made using appropriate wiring. Refer to the detailed wiring diagrams provided in the separate installation guide for specific terminal connections.

• Кубат туташуу: Connect the control panel to a 230 Volt AC power source.
• Батарея туташуу: Connect the lead-acid backup battery to the designated terminals inside the control panel.
• Баскычтоптун туташуусу: Connect the keypad to the control panel using the specified wired connection.
• Сенсор байланыштары: Connect all wired sensors (e.g., motion detectors, door/window contacts) to the appropriate zone inputs on the control panel.
• Siren/Strobe Connections: Connect external sirens and strobe lights to the alarm outputs.

5.4 Баштапкы иштетүү жана конфигурация

1. Күчтү колдонуу: Once all wiring is complete and checked, connect the main power supply.
2. Системаны инициализациялоо: The system will perform a self-test. Follow the on-screen prompts on the keypad.
3. Program Master Code: Set a unique master user code. This code is essential for system programming and advanced functions.
4. Zone Programming: Configure each connected sensor zone according to its type (e.g., entry/exit, interior, 24-hour).
5. Колдонуучу коддору: Create additional user codes for family members or authorized personnel.

6. Иштөө нускамалары

This section covers the basic daily operation of your ABUS AZAA10000 Terxon SX Alarm Control Panel.

6.1 Системаны куралдандыруу

• Full Arming (Away Mode): Ensures all zones are active. Enter your user code and press the "Arm" button (or equivalent). The system will provide an exit delay.
• Partial Arming (Stay Mode): Activates perimeter zones while allowing movement within interior zones. Enter your user code and press the "Stay" or "Partial Arm" button.

6.2 Системаны куралсыздандыруу

To disarm the system, enter your user code when prompted (e.g., upon entry during the entry delay) or press the "Disarm" button (or equivalent) and then enter your code.

6.3 Alarm Events

When an alarm is triggered, the system will activate sirens (audio) and potentially strobe lights (visual). The keypad display will indicate the triggered zone. To silence the alarm, disarm the system using your user code.

6.4 Системанын абалы

The LCD keypad displays the current system status, including armed/disarmed state, open zones, and any system faults (e.g., low battery, communication errors).

7. Техникалык тейлөө

Үзгүлтүксүз техникалык тейлөө сиздин сигнализация системаңыздын узак мөөнөттүү жана ишенимдүү иштешин камсыз кылат.

• Батареяны текшерүү: The lead-acid backup battery should be checked periodically (e.g., annually) and replaced every 3-5 years, or when the system indicates a low battery fault.
• Тазалоо: Gently wipe the keypad and control panel housing with a soft, dry cloth. Do not use abrasive cleaners or solvents.
• Сенсор сыноо: Periodically test all connected sensors (e.g., motion detectors, door/window contacts) to ensure they are functioning correctly.
• Программалык камсыздоо жаңыртуулары: While specific software update information is not available, it is good practice to consult with your installer or ABUS support for any recommended firmware updates.

8. Кыйынчылыктарды

This section addresses common issues you might encounter with your ABUS AZAA10000 Terxon SX Alarm Control Panel.

For issues not listed here or if troubleshooting steps do not resolve the problem, please contact ABUS technical support or your certified installer.

9. Техникалык шарттар

10. Кепилдик жана колдоо

ABUS provides a warranty period of at least 2 жыл after purchase for this product, ensuring proper functionality and protection against defects.

Spare parts availability is guaranteed for 1 жыл.

For technical assistance, warranty claims, or further information, please contact your authorized ABUS dealer or visit the official ABUS webколдоо булактары үчүн сайт.