lightmaXX Tour Spot Arc топтому 4 даана - LED Spot топтому колдонуучунун колдонмосу

1. Киришүү

Thank you for choosing the lightmaXX Tour Spot Arc Set of 4. This LED spot set is designed for professional stage and event lighting, offering versatile illumination options. This manual provides essential information for the safe and efficient operation, setup, and maintenance of your new lighting system. Please read this manual thoroughly before use and keep it for future reference.

2. Коопсуздук нускамалары

Электр шокунун, өрттүн же жаракаттын алдын алуу үчүн ар дайым төмөнкү коопсуздук чараларын сактаңыз:

• Электр камсыздоо: электр менен жабдууну камсыз кылуу voltage аппаратта көрсөтүлгөн талаптарга дал келет.
• Негиздөө: Аппаратты ар дайым жерге туташтырылган розеткага туташтырыңыз.
• Вентиляция: Вентиляция тешиктерин жаап албаңыз. Ашыкча ысып кетүүнүн алдын алуу үчүн аппараттын айланасында адекваттуу аба агымын камсыз кылыңыз.
• Нымдуулук: Do not expose the device to rain or moisture. Do not use in damp же нымдуу жерлер.
• Тазалоо: Disconnect from power before cleaning. Use a dry cloth only.
• Кызмат: Бардык тейлөө иштерин квалификациялуу тейлөө кызматкерлерине тапшырыңыз. Түзмөктү өз алдынча оңдоого аракет кылбаңыз.
• Монтаждоо: When mounting overhead, always use a safety cable. Ensure the mounting surface can support the weight of the fixture.
• Көздүн коопсуздугу: Do not look directly into the LED light source when the fixture is operating, as it can cause eye damage.

3. Пакеттин мазмуну

Таңгактан чыгаргандан кийин бардык буюмдар бар экенин жана жакшы абалда экендигин текшериңиз:

• 4 x lightmaXX Tour Spot Arc LED Fixtures
• 1 x Custom Flight Case for transport and storage
• 4 х Power Cables
• 1 х Колдонуучунун колдонмосу (бул документ)

Figure 3.1: The lightmaXX Tour Spot Arc Set, including four LED fixtures and their dedicated flight case.

4. Орнотуу

Follow these steps to set up your lightmaXX Tour Spot Arc LED fixtures:

1. Таңылганын ачуу: Carefully remove the LED fixtures from the flight case.
2. Позициялоо: Place each fixture on a stable, flat surface or mount it securely using appropriate clamps and safety cables to a truss or stand. Ensure the fixture's adjustable bracket is tightened to hold the desired angle.
3. Кубат туташуу: Connect the provided power cables to the power input on each fixture and then to a suitable grounded power outlet.
4. DMX туташуусу (милдеттүү эмес): If using DMX control, connect a DMX cable from your DMX controller to the DMX IN port of the first fixture. Then, daisy-chain DMX cables from the DMX OUT of the first fixture to the DMX IN of the next, and so on. Terminate the last fixture in the chain with a DMX terminator if recommended by your DMX controller's manual.

Figure 4.1: A single lightmaXX Tour Spot Arc LED fixture, ready for setup.

5. Иштөө

The lightmaXX Tour Spot Arc fixtures can be operated in various modes:

• Өз алдынча режим:

  Each fixture can operate independently using its built-in programs. Use the control panel on the rear of the unit to navigate through menus and select desired colors, fades, or sound-active modes.

• Master/Slave режими:

  Connect multiple fixtures via DMX cables. Set one fixture as the "Master" and the others as "Slave." The slave units will then mimic the master unit's operation, allowing for synchronized lighting effects without a DMX controller.
• DMX башкаруу режими:

  For advanced control, connect the fixtures to a DMX controller. Each fixture will require a unique DMX address. Refer to the DMX channel chart (usually found in a separate DMX manual or on the manufacturer's website) to understand the functions controlled by each DMX channel.

Power on the units after all connections are made. Use the display and buttons on the back of each unit to select the desired operating mode and settings.

6. Техникалык тейлөө

Regular maintenance ensures the longevity and optimal performance of your lightmaXX Tour Spot Arc fixtures:

• Тазалоо: Periodically clean the exterior of the fixtures with a soft, dry, lint-free cloth. Do not use abrasive cleaners or solvents. Ensure the lenses are clean for maximum light output.
• Вентиляция: Regularly check that the ventilation openings are free from dust and debris. Use compressed air to clear any blockages if necessary.
• Кабелдик текшерүү: Inspect power and DMX cables for any signs of damage (cuts, frayed wires) before each use. Replace damaged cables immediately.
• Сактагыч: When not in use, store the fixtures in their original flight case in a dry, cool environment to protect them from dust, moisture, and physical damage.

Figure 6.1: The robust flight case provides excellent protection for storage and transport.

7. Кыйынчылыктарды

If you encounter issues with your lightmaXX Tour Spot Arc fixtures, refer to the following table:

If the problem persists after attempting these solutions, please contact lightmaXX customer support or a qualified technician.

8. Техникалык шарттар

Key technical specifications for the lightmaXX Tour Spot Arc LED fixtures:

9. Кепилдик жана колдоо

For warranty information and technical support, please refer to the warranty card included with your product or visit the official lightmaXX webсайт. Ар кандай кепилдик дооматтары үчүн сатып алганыңыздын далилин сактаңыз.

For further assistance, you may contact lightmaXX customer service through their official channels.