Introduction
Thank you for choosing the HOFTRONIC Q-Series 120cm LED Batten. This robust and waterproof LED fixture is designed for easy installation and provides efficient, high-quality illumination. It is suitable for a wide range of environments, including basements, garages, workshops, and warehouses. This manual provides essential information for safe installation, operation, and maintenance of your new LED batten.
The Q-Series LED batten features an integrated light source, eliminating the need for separate LED tubes. Its energy-efficient design consumes only 36 watts while delivering 4320 lumens, offering significant energy savings compared to traditional fluorescent fixtures.
Коопсуздук нускамалары
- Электр коопсуздугу: Installation must be performed by a qualified electrician in accordance with local electrical codes and regulations. Ensure the power supply is disconnected before any installation, maintenance, or repair work.
- Тtage: This fixture operates on 230 Volts. Verify your power supply matches this requirement.
- Колдонуу: Handle the fixture with care to avoid damage. Do not drop or subject it to excessive force.
- Курчап турган чөйрө: The fixture is rated IP65 for water and dust resistance and IK08 for impact protection, making it suitable for both indoor and outdoor use in demanding environments. However, avoid direct exposure to corrosive chemicals unless specifically designed for such conditions.
- Температура: Operate the fixture within the specified temperature range of -20°C to +40°C.
- Өзгөртүүлөр: Do not attempt to modify or disassemble the fixture. This will void the warranty and may pose a safety risk.
Пакеттин мазмуну
Орнотууну баштоодон мурун бардык компоненттер бар экендигин текшериңиз:
- HOFTRONIC Q-Series 120cm LED Batten (with integrated LED light source)
- Mounting clips (stainless steel)
- Орнотуу үчүн бурамалар жана дубалга бекитүүчү тыгындар
- Quick connection clips
Техникалык шарттар
| Спецификация | Нарк |
|---|---|
| Бренд | HOFTRONIC |
| Модель номери | 2711559 |
| Өлчөмдөрү (L x W x Y) | 120 x 5.7 x 4.7 см |
| Салмагы | 5 килограмм |
| Материал | Поликарбонат (PC) |
| Энергияны керектөө | 36 Ватт |
| Жарык агымы | 4320 Lumens |
| Түс температурасы | 6500 Келвин (Муздак Ак) |
| Тtage | 230 вольт |
| IP рейтинги | IP65 (Суу жана чаң өткөрбөйт) |
| IK Рейтинг | IK08 (Impact Protection) |
| Орточо жашоо | 25,000 hours (approx. 10 years with average use) |
| Өзгөчөлүктөр | Plug and Play, Quick Mounting, Linkable (up to 20 units), Flicker-free |
Энергия натыйжалуулугу боюнча толук маалымат алуу үчүн EPREL маалымат базасын караңыз:
Image: Energy efficiency label showing the product's energy class and consumption.
Орнотуу жана орнотуу
Баштоодон мурун: Негизги электр булагы өчүргүчтө өчүрүлгөнүн текшериңиз.
1. Арматураны орнотуу
- Determine the desired mounting location on the ceiling or wall.
- Mark the positions for the mounting clips. Use the fixture itself or measure the distance between the clip attachment points.
- Белгиленген жерлерге тешиктерди бургула жана дубал тыгындарын киргизгиле.
- Secure the stainless steel mounting clips to the surface using the provided screws.
- Align the LED batten with the mounted clips and press firmly until it clicks into place.
Image: Illustration of the mounting process, showing drilling, securing clips, and attaching the fixture.
2. Электр байланышы
The HOFTRONIC Q-Series LED Batten features a quick connect system for easy wiring.
- Open the quick connect terminal cover at one end of the fixture.
- Connect the live (L), neutral (N), and ground (PE) wires from your power supply to the corresponding terminals. Ensure a secure connection.
- Терминалдын капкагын бекем жабыңыз.
Сүрөт: деталдуу view of the quick connect mechanism for electrical wiring.
3. Linking Multiple Fixtures (Optional)
Up to 20 Q-Series battens can be linked together using the integrated quick connectors and a suitable connecting cable (min. 5mm / max. 9mm diameter, PG11 cable gland compatible).
- After mounting the first fixture and connecting it to the power supply, prepare the connecting cable.
- Insert one end of the connecting cable into the quick connect port of the first fixture.
- Mount the next fixture and insert the other end of the connecting cable into its quick connect port.
- Repeat for additional fixtures, ensuring all connections are secure.
Image: Illustration demonstrating the linking capability of multiple HOFTRONIC Q-Series fixtures.
Once all fixtures are mounted and wired, restore power to the circuit.
Иштөө нускамалары
The HOFTRONIC Q-Series LED Batten operates immediately upon receiving power. There are no complex controls or settings. Simply switch on the power supply to illuminate the fixture, and switch it off to turn it off.
The fixture provides a diffuse light output, which helps to reduce glare and create a more comfortable lighting environment.
Image: Visual comparison illustrating the diffuse light provided by the HOFTRONIC Q-Series LED Batten.
Техникалык тейлөө
The HOFTRONIC Q-Series LED Batten requires minimal maintenance due to its durable construction and integrated LED technology.
- Тазалоо: Disconnect power before cleaning. Wipe the exterior of the fixture with a soft, damp cloth. Do not use abrasive cleaners or solvents, as these can damage the polycarbonate material.
- Текшерүү: Periodically inspect the fixture for any signs of damage, loose connections, or excessive dirt accumulation. Address any issues promptly.
- Колдонуучу тейлей турган бөлүктөр жок: LED жарык булагы орнотулган жана колдонуучу тарабынан алмаштырылбайт. Арматураны ачууга аракет кылбаңыз.
Проблемаларды чечүү
If you encounter issues with your HOFTRONIC Q-Series LED Batten, refer to the following common troubleshooting steps:
| Көйгөй | Мүмкүн себеп | Чечим |
|---|---|---|
| Түзмөк күйбөйт | Электр энергиясы жок Бошоң зымдар байланышы Бузулган арматура | Ажыраткычты жана дубалды өчүргүчтү текшериңиз. Ensure all electrical connections are secure (power off first). If other solutions fail, contact customer support. |
| Жаркылдаган жарык | Туруксуз электр энергиясы Бошоң зымдар байланышы | Кубат булагынын туруктуулугун текшерүү. Verify all wiring connections are tight (power off first). |
| Кыскартылган жарыктык | Топурак же чаң топтоо | Clean the fixture's surface (power off first). |
Эгер бул чечимдерди колдонууга аракет кылгандан кийин көйгөй чечилбесе, HOFTRONIC кардарларды колдоо бөлүмүнө кайрылыңыз.
Кепилдик жана колдоо
HOFTRONIC камсыз кылат 2 жылдык кепилдик for this Q-Series LED Batten, covering defects in materials and workmanship under normal use. This warranty period begins from the date of purchase.
The warranty does not cover damage caused by improper installation, misuse, accidents, unauthorized modifications, or natural disasters.
For warranty claims, technical support, or any questions regarding your product, please contact HOFTRONIC customer service through your retailer or the official HOFTRONIC website. Please have your proof of purchase and model number (2711559) ready when contacting support.
Продукт колдонмолору
The HOFTRONIC Q-Series LED Batten is versatile and suitable for a variety of applications, thanks to its robust and waterproof design:
- Өнөр жай: Warehouses, factories, production halls.
- Коммерциялык: Supermarkets, retail spaces, workshops, car repair shops.
- Турак жай: Garages, basements, utility rooms.
- Адистештирилген: Cold storage rooms, car washes, outdoor covered areas.
Сүрөт: Мисamples of the LED batten installed in industrial environments such as car washes, large warehouses, and cold storage facilities.
Сүрөт: Мисamples of the LED batten installed in commercial and residential settings, including supermarkets, workshops, and garages.
Продукциянын өлчөмдөрү
Refer to the diagram below for detailed dimensions of the HOFTRONIC Q-Series LED Batten.
Image: Technical drawing illustrating the length (1200mm) and other key dimensions of the LED batten.
