Продукт бүттүview
The Tonitrui Silent Ball Catch is an innovative solution designed to securely hold doors in place while eliminating the noise associated with traditional ball catches. Utilizing a strong magnetic mechanism, this product ensures quiet operation and enhanced durability compared to conventional mechanical latches. Its adjustable design allows for versatile application across various door thicknesses and types.
Figure 1: Components of the Tonitrui Silent Ball Catch, including the magnetic catch units, corresponding strike plates, and mounting screws.
Негизги өзгөчөлүктөрү
- Күчтүү магниттик кармап туруу: The built-in high-strength magnet firmly secures doors, offering greater closing force than traditional ball catches.
- Тынч операция: The magnetic mechanism eliminates noise during door opening and closing, providing a quieter environment.
- Жакшыртылган туруктуулук: Reduced mechanical wear extends the product's lifespan.
- Dual Adjustable Design:
- Length adjustment via a rotating lock buckle on the brass pillar to adapt to different door and frame thicknesses.
- Retraction distance adjustment by rotating the copper plate at the bottom for optimal closing.
- Easy Installation & Replacement: Designed to match the size of old door ball latches for straightforward replacement without modifications.
Figure 2: Illustration of the magnetic catch's working principle, demonstrating how the internal magnet retracts when the door is open and extends to attract the strike plate when the door is closed, ensuring a secure hold.
Орнотуу боюнча колдонмо
Follow these steps for proper installation of your Silent Ball Catch. The design allows for easy replacement of existing ball latches.
- эшикти даярдоо: Drill a hole at least 0.6 inches deep around the edge of the door where the catch will be installed. Ensure the hole is clean and free of debris.
- Install the Magnetic Unit: Place the magnetic catch unit into the prepared hole. Secure it firmly with the provided screws.
- Strike Plate орнотуу: Fix the flat iron strike plate on the opposite side of the door frame, aligning it with the magnetic unit. Ensure it is flush and securely screwed in.
- Adjust the Gap: After initial installation, use the provided key (or a suitable tool) to adjust the product gap. Rotate the brass pillar to adjust the length and the copper plate at the bottom to fine-tune the retraction distance. Aim for a distance of 0.2-0.5mm between the magnet and the strike plate when the door is closed for optimal silent operation and secure closure.
- Сыноо операциясы: Open and close the door several times to ensure smooth and silent operation, and that the door remains securely closed.
Figure 3: Visual guide for the installation process, from drilling the initial hole to securing and adjusting the magnetic catch and strike plate.
Figure 4: The magnetic catch can be adjusted using a key after installation to achieve the desired fit and silent operation.
Иштөө нускамалары
The Silent Ball Catch operates automatically. When the door is opened, the internal magnet retracts. As the door closes, the magnet extends to attract the metal strike plate, holding the door firmly in position without a loud click or resistance.
Figure 5: The Silent Door Touch in use, demonstrating its seamless and quiet operation for various door types.
Тиркемелер
This product is suitable for various door types, including:
- Room Doors
- Closet Doors
- Жылма эшиктер
Техникалык тейлөө
The Tonitrui Silent Ball Catch requires minimal maintenance due to its durable magnetic design. Periodically check the screws for tightness and ensure the strike plate is clean and free of obstructions. No lubrication is required.
Проблемаларды чечүү
| Көйгөй | Мүмкүн себеп | Чечим |
|---|---|---|
| Эшик бекем жабылбайт. | Magnet not extending far enough; misalignment of components. | Adjust the length of the magnetic unit using the rotating lock buckle. Ensure the strike plate is perfectly aligned with the magnet. |
| Loud clicking sound when closing. | Magnet hitting the strike plate too hard; insufficient gap. | Adjust the retraction distance by rotating the copper plate at the bottom of the magnetic unit. Aim for a small gap (0.2-0.5mm) when closed. |
| Components feel loose. | Монтаждоо бурамдары бош. | Tighten all mounting screws on both the magnetic unit and the strike plate. |
Техникалык шарттар
- Модель номери: JC
- Өндүрүүчү: cilinwan
- Продукциянын өлчөмдөрү: 10 x 4.49 x 0.5 дюйм
- Элемент Салмагы: 4 унция
- Түсү: Silver (as per current product variant)
- Камтылган компоненттер: Бурамалар
- Келип чыккан өлкө: Кытай
