Introduction
The BORA Portamate PM-5090 Adjustable Pedestal Feed Roller Support is designed to provide stable and versatile material support for various woodworking and shop tasks. Its adjustable height and robust construction make it an essential accessory for handling larger workpieces with ease and safety.
Image: The BORA Portamate PM-5090 Adjustable Pedestal Feed Roller Support, shown fully assembled and ready for use. It features an orange A-frame base, a silver vertical post, and a silver roller at the top.
Коопсуздук маалыматы
Always observe the following safety precautions when using the Portamate PM-5090:
- Ensure the support is placed on a stable, level surface before use.
- 200 фунттан (90 кг) ашпаңыз.
- Verify all locking mechanisms are securely engaged before placing material on the roller.
- Keep hands and fingers clear of moving parts, especially during height adjustment.
- Wear appropriate personal protective equipment (PPE) when working with power tools and materials.
This product is intended for supporting raw wood and similar materials. Misuse can result in injury or damage to the product.
Пакеттин мазмуну
The BORA Portamate PM-5090 package includes:
- A-Frame Pedestal Roller Stand (main assembly)
Орнотуу жана чогултуу
The PM-5090 is designed for quick and easy assembly. Follow these steps to set up your roller support:
- Unfold the A-Frame Base: Carefully unfold the orange A-frame legs until they are fully extended and locked into position. Ensure the non-slip rubber feet are firmly on the ground.
- Insert the Vertical Post: Slide the silver vertical post into the central housing of the A-frame base.
- Attach the Roller Assembly: Secure the roller assembly to the top of the vertical post. Ensure all fasteners are tightened.
- Бийиктигин тууралоо: Use the height adjustment handle to set the desired working height. Refer to the 'Operation' section for detailed instructions on height adjustment.
Image: The BORA Portamate PM-5090 shown in its folded position, illustrating its compact design for easy storage. Arrows indicate the inward movement of the legs for folding.
Операция
The PM-5090 offers adjustable support for various tasks. Proper operation ensures stability and efficiency.
Бийиктигин тууралоо
The support can be adjusted from 27 inches (686mm) to 43-3/4 inches (1.1M).
- Locate the ABS height adjustment handle on the vertical post.
- Loosen the handle to disengage the column wedge lock.
- Raise or lower the vertical post to the desired height.
- Tighten the handle firmly to engage the wedge lock, securing the post at the chosen height. Ensure the post is stable before use.
Image: The BORA Portamate PM-5090 demonstrating its adjustable height feature. The image shows the roller support at three different heights, with an arrow indicating the range of adjustment from 27 inches to 43-3/4 inches.
Material Feeding
Position the PM-5090 to support long workpieces as they pass through saws, planers, or other machinery. The 11-1/4 inch ball bearing steel roller allows for smooth and effortless material movement.
Image: The BORA Portamate PM-5090 in use, supporting a long wooden board as it is fed into a table saw. The image highlights the maximum capacity of 200 lbs.
Техникалык тейлөө
To ensure the longevity and optimal performance of your PM-5090, follow these maintenance guidelines:
- Тазалоо: Wipe down the roller and frame with a damp cloth to remove sawdust and debris after each use. Avoid abrasive cleaners.
- Майлоо: Periodically check the roller bearings for smooth operation. If necessary, apply a small amount of light machine oil to the roller axles.
- Текшерүү: Regularly inspect all bolts, nuts, and the height adjustment mechanism for tightness and wear. Tighten any loose fasteners.
- Сактагыч: When not in use, fold the support flat and store it in a dry location to prevent rust and damage.
Проблемаларды чечүү
If you encounter issues with your PM-5090, consider the following:
- Roller not spinning smoothly: Check for debris caught in the bearings. Clean the roller and apply lubricant if needed.
- Support feels unstable: Ensure the A-frame legs are fully extended and locked. Verify the height adjustment handle is securely tightened. Check that the non-slip feet are intact and making full contact with the ground.
- Бийиктикти тууралоодогу кыйынчылык: Loosen the height adjustment handle completely. Clean any sawdust or grime from the vertical post and the internal locking mechanism.
Техникалык шарттар
| Өзгөчөлүк | Спецификация |
|---|---|
| Модель номери | ПМ-5090 |
| Бийиктигин тууралоо диапазону | 27" to 43-3/4" (686mm to 1.1M) |
| Roller Length | 11-1/4" (286мм) |
| Роликтин түрү | Ball Bearing Steel Roller |
| Максималдуу жүктөө жөндөмдүүлүгү | 200 фунт (90 кг) |
| Продукциянын өлчөмдөрү (LxWxH) | 60.96 x 12.7 x 10.16 см (бүктөлгөн) |
| Элемент Салмагы | 4.08 кг (8.99 фунт) |
| Бүтүрүү | Туруктуу порошок |
| Камтылган компоненттер | A-Frame Pedestal Roller Stand |
Image: An annotated diagram of the BORA Portamate PM-5090, highlighting key features such as adjustable height (27" - 43 3/4"), wedge design for locked height, folding A-frame for stability, leveling foot for uneven ground, and a maximum capacity of 200 lbs.
Кепилдик жана колдоо
For warranty information or technical support, please refer to the official BORA Portamate webсайтка же кардарларды тейлөө бөлүмүнө кайрылыңыз. Кепилдик дооматтар үчүн сатып алуу дүмүрчөгүңүздү сактаңыз.
Manufacturer: Affinity Tool Works
