SMACO S700MAX 3.8L Mini Scuba Tank System User Manual

1. Киришүү

This manual provides essential instructions for the safe and effective use of your SMACO S700MAX 3.8L Mini Scuba Tank System. This portable diving system, assembled from two 1.9L cylinders, is designed for shallow water diving, recreational activities, and short-term underwater work, offering approximately 30-45 minutes of breath support when fully charged. Please read this manual thoroughly before operation.

2. Коопсуздук маалыматы

WARNING: Diving carries inherent risks. Improper use of this equipment can lead to serious injury or death. Always follow safe diving practices and local regulations. This equipment is intended for shallow water use by trained individuals or under direct supervision.

• Ensure you are properly trained and certified for diving activities before using this product.
• Regularly inspect all components for damage or wear before each use.
• Do not exceed the maximum inflation pressure of 3000 Psi (200 Bar / 20 Mpa).
• The tank body is made of 6061 aviation aluminum and is spray-painted for corrosion resistance.
• This product has passed CE/PED/DOT certification, ensuring compliance with safety standards in most regions.
• Diving time is influenced by factors such as breathing rate, depth, physical fitness, and water temperature. Monitor your pressure gauge closely.
• For air travel, the regulator must be disassembled from the cylinders, and the tanks must be completely empty of air.

3. Пакеттин мазмуну

Your SMACO S700MAX 3.8L Mini Scuba Tank System package includes:

• S700MAX Regulator
• Two 1.9L Scuba Cylinders
• Diving Vest
• Full Face Dive Mask
• User Manual
• Запастык тетиктер сумкасы

1-сүрөт: Бүттүview of the SMACO S700MAX Mini Scuba Tank System components, including the two 1.9L tanks, S700MAX regulator, full face mask, and diving vest.

4. Продукт бүтүп калдыview жана компоненттер

The S700MAX regulator is the central control unit for your diving system. It integrates several key functions for safe and efficient operation.

• Аба алмаштыргыч: Controls the airflow from the tanks.
• Explosion-proof Valve: A safety mechanism to prevent over-pressurization.
• Inflation Interface: 8mm port for connecting inflation sources.
• Pressure Reduction Chamber: Reduces high-pressure air from the tanks to a breathable pressure.
• Басым өлчөгүч: Displays the remaining air pressure in the tanks.
• Secondary Regulator: Delivers air to the diver's mouth via the mouthpiece.
• BCD Connector: Allows connection to a specific buoyancy control device.

2-сүрөт: Detailed diagram of the S700MAX regulator and its connections to the two 1.9L cylinders, highlighting key components.

3-сүрөт: Деталдаштырылган views of the S700MAX regulator's individual components, such as the 8mm inflate interface, 5K explosion-proof valve, BCD junction, and silicone mouthpiece.

5. Орнотуу жана чогултуу

Follow these steps to assemble your SMACO S700MAX system:

1. Connect Cylinders to Regulator: Carefully screw the two 1.9L scuba cylinders into the S700MAX regulator. Ensure a secure, hand-tight connection to prevent air leaks.
2. Шлангдарды тиркөө: Connect the high-pressure hose from the regulator to the pressure gauge, and the low-pressure hose to the secondary regulator (mouthpiece).
3. Install in Diving Vest: Place the assembled tank system into the designated pocket of the diving vest. Secure it using the straps and buckles provided on the vest. The vest is designed for a labor-saving and anti-drop fit.
4. Connect Full Face Mask: Attach the secondary regulator's mouthpiece to the full face mask as per the mask's instructions.

4-сүрөт: Illustration of the SMACO S700MAX system integrated with the diving vest, demonstrating its ergonomic and secure design for underwater use.

6. Inflation Methods

The SMACO S700MAX system offers multiple ways to refill your tanks:

• Dive Shops: The most common and recommended method. Most professional dive shops can refill your tanks. For non-certified customers, it is advisable to confirm with the dive shop in advance if they will inflate your tanks.
• Аба компрессору: If you own a high-pressure air compressor suitable for scuba tanks, you can inflate the tanks yourself. Ensure the compressor is rated for 3000 Psi (200 Bar / 20 Mpa) and has the correct 8mm inflation interface.
• Scuba Adapter: You can use a scuba adapter to transfer air from a larger scuba tank to your SMACO mini tanks.

The diameter of the diving tank filling interface is 8mm, and the maximum inflation pressure is 3000 Psi / 200 Bar / 20 Mpa. Always ensure the air source provides clean, dry, breathable air.

5-сүрөт: Illustration of the tank's construction and the process of filling with clean air, emphasizing the quality of the air provided for comfortable breathing.

7. Иштөө нускамалары

Once your tanks are filled and the system is assembled, you are ready for diving:

1. Сууга түшүүгө чейинки текшерүү: Before entering the water, perform a thorough pre-dive check. Verify all connections are secure, the pressure gauge reads full, and the air switch is in the OFF position.
2. Donning Equipment: Put on the diving vest with the attached tanks and secure all straps. Don your full face mask.
3. Entering Water: Enter the water safely.
4. Initiate Airflow: Once submerged and ready to breathe, slowly turn the air switch to the ON position. Take a few shallow breaths to ensure air is flowing correctly.
5. Монитор басымы: Continuously monitor your pressure gauge throughout the dive. Plan your dive to ensure you have sufficient air for ascent and safety stops.
6. Diving Depth and Time: This system is suitable for diving depths up to 33 feet (10 meters) and provides approximately 30-45 minutes of breath support. These times are estimates and can vary significantly based on individual breathing rates, exertion, and environmental conditions.
7. Өтүү: Always ascend slowly, following safe diving practices to avoid decompression sickness. Turn the air switch to the OFF position once you are out of the water or no longer require air.

6-сүрөт: Visual representation of the SMACO S700MAX system in use, highlighting its suitability for short, shallow dives and various underwater activities.

8. Travel Guidelines

The SMACO S700MAX mini diving tanks can be taken on an airplane, provided specific conditions are met:

• Бөлүп-жаруучу жөнгө салгыч: The S700MAX regulator must be completely disassembled from the two 1.9L cylinders.
• Бош танктар: Ensure there is absolutely no air remaining in the cylinders. The tanks must be completely depressurized.
• Check Airline Regulations: Always verify the latest regulations with your specific airline and airport security prior to travel, as rules can vary.

7-сүрөт: Demonstrates the portability of the SMACO S700MAX system for air travel, emphasizing the requirement to disassemble the regulator and empty the tanks.

9. Техникалык тейлөө жана сактоо

Proper maintenance and storage will extend the life of your SMACO S700MAX system:

• Колдонгондон кийин жуу: After each dive, thoroughly rinse all components with fresh water to remove salt, sand, and chlorine.
• Толугу менен кургатуу: Allow all parts to air dry completely in a shaded, well-ventilated area before storage.
• Үзгүлтүксүз текшерүү: Periodically inspect hoses, O-rings, and connections for any signs of wear, cracks, or damage. Replace worn parts immediately.
• Туура сактоо: Store the system in a cool, dry place away from direct sunlight and extreme temperatures. Keep tanks partially pressurized (e.g., 100-200 Psi) to prevent moisture ingress, but never store fully pressurized for extended periods.
• Кесиптик тейлөө: It is recommended to have your regulator and tanks professionally serviced annually or as recommended by a certified technician.

10. Кыйынчылыктарды

Бул бөлүм сиз кабылышы мүмкүн болгон жалпы көйгөйлөрдү карайт:

• Аба агуусу: Check all connections for tightness. Inspect O-rings for damage or displacement. Ensure the air switch is fully closed when not in use.
• Low Air Pressure Reading: Confirm tanks are fully inflated. If the gauge reads low after inflation, check for leaks.
• Дем алуу кыйынчылыгы: Ensure the air switch is fully open. Check for any obstructions in the mouthpiece or regulator. If issues persist, discontinue use and seek professional inspection.
• Regulator Malfunction: If the regulator is not functioning correctly (e.g., free-flowing air, difficulty turning switch), do not attempt to repair it yourself. Contact SMACO customer support or a certified technician.

11. Техникалык шарттар

8-сүрөт: Approximate dimensions of the SMACO S700MAX system when worn with the diving vest.

12. Кепилдик жана колдоо

For warranty information, technical support, or to purchase spare parts, please contact SMACO customer service through their official webсайтына же продуктуну сатып алган сатуучуга кайрылыңыз. Кепилдик талаптары үчүн сатып алгандыгыңызды тастыктаган документти сактап коюңуз.

13. Кошумча маалымат

The SMACO S700MAX system offers flexibility with its dual 1.9L cylinders. You can connect them with the S700MAX regulator to form a 3.8L system, or use two separate S700 regulators to create two individual 1.9L scuba tanks (S700). This modularity allows for various diving configurations.

9-сүрөт: The SMACO Mini Scuba Tank Kit, highlighting its compact and portable design for ease of use and transport.

10-сүрөт: Various applications for the SMACO S700MAX system, including diving practice, underwater cleaning, exploration, and photography.