1. Киришүү
The ATOMSTACK L2 Z-Axis Height Adjuster is an advanced accessory designed to enhance the precision and safety of your laser engraving machine, specifically compatible with the Atomstack A24 Pro. This device integrates precise focus adjustment capabilities with a built-in flame detection module, providing both efficiency and protection during operation.
It allows for quick and accurate focusing of the laser head, significantly reducing setup time and improving engraving quality. The integrated flame detection system offers an additional layer of safety by automatically stopping the machine if a flame is detected, preventing potential hazards.
Image: Multiple ATOMSTACK L2 Z-Axis Height Adjuster units, showcasing компакт дизайн.
2. Продукциянын өзгөчөлүктөрү
- Precise Focus Adjustment: Enables fast and precise focusing within 10 seconds with sensitive response. Fixed focus height can be adjusted via Lightburn software.
- Коопсуздукту коргоо: Built-in flame detection module automatically controls the engraving machine to avoid hazards, ensuring safety of the machine and working environment.
- Оңой орнотуу: Can be installed within 10 minutes. Supports one-click autofocus via machine control box or software code.
- Special Customization: Specifically designed for Atomstack A24 Pro laser engraving machines.
3. Пакеттин мазмуну
Пакетти ачкандан кийин, төмөнкү компоненттердин бардыгы бар экенин жана жакшы абалда экендигин текшериңиз:
- Automatic Z-axis assembly (1 PCS)
- Laser Dovetail Slider (1 PCS)
- Z-axis connection line (1 PCS)
- Toolkit (1 PCS)
- Screw pack (1 PCS)
- Instructions (1 PCS)
Image: All components included in the ATOMSTACK L2 Z-Axis Height Adjuster package, laid out on a surface.
4. Орнотуу жана орнотуу
The ATOMSTACK L2 Z-Axis Height Adjuster is designed for straightforward installation, typically completed within 10 minutes. Follow these steps to integrate it with your Atomstack A24 Pro laser engraving machine:
- Unpack all components and ensure they match the package contents list.
- Refer to the included instructions for specific mounting points on your Atomstack A24 Pro. The Z-axis assembly will attach to the laser head carriage.
- Secure the Laser Dovetail Slider to the appropriate position as indicated in the manual.
- Connect the Z-axis connection line from the Z-axis assembly to the designated port on your laser engraving machine's control system.
- Ensure all screws from the screw pack are properly tightened to secure the assembly.
It is crucial to select the correct version of the Z-axis kit for your specific laser machine model, as laser heights can vary.
Image: The ATOMSTACK L2 Smart Z Axis Module shown mounted on a schematic diagram of a laser engraver, illustrating its integration.
Сүрөт: жакын план view of the ATOMSTACK L2 Z-Axis Height Adjuster installed on a laser engraving machine, ready for operation.
5. Иштөө нускамалары
5.1. Precise Focus Adjustment (Autofocus)
The ATOMSTACK L2 Z-Axis Height Adjuster features a smart automatic Z-axis for rapid and accurate focusing. This can be achieved in two primary ways:
- One-Click Autofocus via Control Box: If your A20 Pro V2 machine has an autofocus button on its control box, simply press it to initiate the autofocus process. The device will automatically adjust the laser height for optimal focus.
- Software-Controlled Autofocus (Lightburn): You can also set a specific code within the Lightburn software to complete one-click autofocus. The fixed focus height can be adjusted according to your actual requirements through the Lightburn software interface.
The autofocus process typically completes within 10 seconds, providing sensitive and precise adjustments.
Image: A visual comparison demonstrating the efficiency of motorized autofocus via Lightburn software versus the manual focus method, highlighting the speed and convenience of the ATOMSTACK L2.
5.2. Flame Detection Function
The integrated flame detection module provides critical safety during laser engraving operations. This module is designed to:
- Sensitively detect the presence of flames within the engraving area.
- Automatically control the engraving machine to stop operation immediately upon flame detection.
This feature helps to prevent potential fire hazards, ensuring the safety of both the machine and the working environment, and providing comprehensive protection against unforeseen incidents.
Image: A laser engraving machine demonstrating the flame detection function, showing the laser stopping automatically when a flame is detected, preventing damage.
6. Техникалык тейлөө
To ensure the longevity and optimal performance of your ATOMSTACK L2 Z-Axis Height Adjuster, follow these general maintenance guidelines:
- үзгүлтүксүз тазалоо: Keep the Z-axis assembly free from dust, debris, and engraving residue. Use a soft, dry cloth for cleaning. Avoid abrasive materials or harsh chemicals.
- Байланыштарды текшерүү: Periodically inspect all electrical connections and cables for any signs of wear or looseness. Ensure the Z-axis connection line is securely plugged in.
- Майлоо: If the Z-axis mechanism appears stiff or noisy, consult the main laser engraver manual or ATOMSTACK support for recommended lubrication procedures and suitable lubricants.
- Бурама тыгыздыгы: Occasionally check the tightness of all mounting screws. Loose screws can affect precision and stability. (As noted in customer reviews, this can be a point of concern).
Always power off and unplug your laser engraving machine before performing any maintenance.
7. Кыйынчылыктарды
This section addresses common issues you might encounter with your ATOMSTACK L2 Z-Axis Height Adjuster. For more complex problems, please contact customer support.
| Көйгөй | Мүмкүн себеп | Чечим |
|---|---|---|
| Autofocus not working or inaccurate. | Loose connections; software settings incorrect; obstruction in Z-axis path. | Check Z-axis connection line. Verify Lightburn software settings for autofocus. Ensure no physical obstructions hinder Z-axis movement. |
| Flame detection not activating. | Sensor obstructed or dirty; connection issue; module malfunction. | Clean the flame detection sensor. Check its connection to the main unit. If the issue persists, contact support. |
| Z-axis movement is rough or noisy. | Lack of lubrication; debris in mechanism; loose internal components. | Clean the Z-axis mechanism. Apply appropriate lubricant if recommended by ATOMSTACK. Check for loose screws within the assembly (refer to installation section). |
| Device not recognized by laser engraver. | Incorrect connection; driver issue; compatibility problem. | Ensure the Z-axis connection line is correctly and firmly plugged in. Restart both the engraver and the computer. Verify compatibility with your specific engraver model. |
8. Техникалык шарттар
| Спецификация | Деталь |
|---|---|
| Продукциянын өлчөмдөрү | 2.57 x 1.55 x 5.7 дюйм |
| Элемент моделинин номери | L2-20W |
| ASIN | B0D1VDHD5C |
| Элемент Салмагы | 1.28 фунт |
| Өндүрүүчү | ATOMSTACK |
| Дата биринчи жеткиликтүү | 26-апрель, 2024-жыл |
9. Кепилдик жана колдоо
ATOMSTACK is committed to providing high-quality products and excellent customer service. While specific warranty details are not provided here, ATOMSTACK offers professional technical and support teams available 24/7 to assist with any questions or issues you may encounter.
For technical assistance, troubleshooting, or warranty inquiries, please visit the official ATOMSTACK support website or contact their customer service directly. Keep your purchase receipt or order details handy for faster service.
You can find more information and contact details on the official ATOMSTACK store page: ATOMSTACK расмий дүкөнү
