Introduction
This manual provides essential information for the safe and effective installation, operation, and maintenance of your HELLA 2JA 959 037-801 Warning Light. Please read this manual thoroughly before use and retain it for future reference.
Коопсуздук маалыматы
Травматизмди же буюмга зыян келтирбөө үчүн ар дайым төмөнкү коопсуздук чараларын сактаңыз:
- Ensure the vehicle's power supply is disconnected before installation.
- Installation should be performed by qualified personnel to ensure correct wiring and mounting.
- Продукцияны эч кандай жол менен өзгөртпөңүз, анткени бул кепилдикти жокко чыгарып, коопсуздукка доо кетириши мүмкүн.
- Иштеп жаткан томtage of the vehicle matches the product's specifications (9-33V).
- Securely mount the warning light to prevent detachment during vehicle operation.
Продукт бүттүview
The HELLA 2JA 959 037-801 is an LED warning light designed for various automotive applications. It features a robust construction and a green lens, providing a clear flashing warning signal.
Figure 1: HELLA 2JA 959 037-801 Warning Light. This image displays the rectangular warning light with a prominent green LED lens in the center, flanked by yellow end caps.
Негизги өзгөчөлүктөрү:
- LED технологиясы: Energy-efficient and long-lasting illumination.
- Flashing Warning Signal: Designed for clear visibility and safety.
- Wide Voltage диапазону: Operates on 9-33V DC systems.
- Күчтүү коргоо: IP 6K6 and IP 6K7 rated for dust and water ingress.
- Полярдуулукту кайтаруу: Safeguards against incorrect wiring.
- Кайра программалануучу: Functionality can be adjusted as needed.
Техникалык шарттар
| Атрибут | Нарк |
|---|---|
| Модель номери | 2JA 959 037-801 |
| OEM Reference Number | 2JA 959 037-801 |
| Тtage Диапазон | 9-33 В |
| Энергияны керектөө | 9 Вт |
| Light Design | LED |
| Light Function | Flashing warning signal |
| Линзанын түсү | Жашыл |
| Монтаж түрү | бекитти |
| Кабелдин узундугу | 2500 мм |
| Өлчөмдөрү (L x W x D) | 20.8 cm x 177 mm x 31 mm (Length x Width x Depth) |
| Бийиктик | 100 мм |
| Салмагы | 0.5 кг |
| Protection Type (IP Code) | IP 6K6, IP 6K7 |
| Test Mark | EMC, Fulfils ECE norm: R10 |
| Полярдуулукту кайтаруу | Ооба |
| Кайра программалануучу | Ооба |
Орнотуу жана орнотуу
- Орнотууга даярданыңыз:
- Ensure the vehicle's ignition is off and the battery is disconnected to prevent electrical shock or short circuits.
- Choose a suitable mounting location that provides clear visibility for the warning light and allows for secure bolted mounting.
- Жарыкты орнотуу:
- The warning light is designed for bolted mounting. Use appropriate fasteners (not included) to secure the unit firmly to the chosen surface.
- Ensure the mounting surface is flat and strong enough to support the light and withstand vehicle vibrations.
- Зымдарды туташтыруу:
- The light comes with a 2500 mm cable. Connect the positive (+) wire to a switched power source within the 9-33V range.
- Connect the negative (-) wire to a suitable vehicle ground.
- Түзмөк тескери полярдуулуктан коргоо функциясына ээ, бирок ар дайым туура зымдарды туташтыруу сунушталат.
- Бардык туташуулардын коррозияга жана кыска туташууларга жол бербөө үчүн бекем жана изоляциялангандыгын текшериңиз.
- Акыркы текшерүү:
- Once mounted and wired, reconnect the vehicle battery.
- Test the warning light to ensure it functions correctly, emitting a clear flashing signal.
Иштөө нускамалары
The HELLA 2JA 959 037-801 Warning Light is designed for straightforward operation.
- Жандандыруу: The warning light will activate when power is supplied to its connected circuit. This is typically controlled by a switch in the vehicle's cabin.
- Flashing Signal: Upon activation, the LED light will emit a flashing warning signal.
- Кайра программалоо: This unit can be reprogrammed. Refer to specific HELLA programming tools and software for details on how to adjust flash patterns or other functionalities. This typically requires specialized equipment and knowledge.
Техникалык тейлөө
The HELLA 2JA 959 037-801 Warning Light requires minimal maintenance due to its durable design and LED technology.
- Тазалоо: Линзаны мезгил-мезгили менен жумшак, d менен тазалап туруңузamp cloth and mild soap solution to ensure maximum light output. Avoid abrasive cleaners or solvents.
- Текшерүү: Regularly check the mounting bolts for tightness and inspect the wiring for any signs of wear, damage, or corrosion.
- Зыян: If the housing or lens is damaged, the unit's IP rating may be compromised. Replace damaged units promptly.
Проблемаларды чечүү
| Көйгөй | Мүмкүн себеп | Чечим |
|---|---|---|
| Жарык жанбайт. | No power supply, faulty wiring, blown fuse, incorrect voltage. | Check power connections, vehicle fuse box, and ensure voltage is within 9-33V. Verify wiring for continuity. |
| Жарык бүлбүлдөп же күңүрт. | Loose connection, insufficient voltage, damaged wiring. | Inspect all wiring connections for tightness. Check vehicle's electrical system for stable voltage чыгаруу. |
| Light pattern is incorrect or inconsistent. | Internal fault, incorrect reprogramming. | If recently reprogrammed, verify the programming steps. If not, contact HELLA technical support for assistance. |
| Линзанын ичиндеги нымдуулук. | Compromised seal due to damage or improper installation. | Inspect the unit for cracks or damage. Ensure mounting is secure and not causing stress on the housing. Replace if seal is compromised. |
Кепилдик жана колдоо
For warranty information and technical support, please refer to the official HELLA website or contact your authorized HELLA distributor. Keep your purchase receipt as proof of purchase.
