1. Киришүү
Thank you for choosing the EazeID D210S Label Maker. This portable device is designed for efficient and versatile labeling, suitable for various environments including home, office, and school. Featuring a user-friendly QWERTY keyboard and dual power options, it produces durable, laminated labels resistant to water, abrasion, fading, and temperature changes.
This manual provides detailed instructions on how to set up, operate, and maintain your label maker to ensure optimal performance and longevity.
2. Орнотуу
2.1. Пакеттин мазмуну
Баштоодон мурун, пакетиңизде бардык элементтер бар экенин текшериңиз:
- EazeID D210S Gray label maker (1 unit)
- Sample label tape waterproof (12mm 0.47 laminated White, 4M) (1 unit)
- С тибиндеги кабель (1 даана)
- Колдонуучунун колдонмосу (1 бирдик)
Image: Contents of the EazeID D210S Label Maker package, including the device, sample tape, Type-C cable, and manual.
2.2. Аппаратты кубаттоо
The EazeID D210S label maker offers two power options:
- USB Type-C кабели: Connect the included Type-C cable to the label maker and a compatible power adapter (not included). The device does not support charging via Type-C; it operates directly from the power source.
- AAA батареялары: For portable use, insert 6 AAA batteries (not included) into the battery compartment located on the underside of the device. Ensure correct polarity.
Эскертүү:
- It is recommended to use a charger block with an output voltage of ±5V when using the Type-C cable.
- Do not leave batteries in the printer when it is powered by the USB Type-C cable.
Image: Illustration of the label maker's dual power options: USB Type-C for continuous power and AAA batteries for portability.
2.3. Этикетка лентасын орнотуу
To install the label tape:
- Этикетка жасоочунун артындагы лента бөлүгүнүн капкагын ачыңыз.
- Insert the label tape cassette with the tape facing the print head. Ensure the tape is properly aligned and clicks into place.
- Тасма бөлүмүнүн капкагын бекем жабыңыз.
Image: The label maker with its tape compartment open, illustrating the tape installation area and the integrated cutter.
3. Иштөө нускамалары
3.1. Негизги энбелгилерди түзүү
Follow these steps to create a basic label:
- Күйгүзүү: Энбелги жасоочуну иштетүү үчүн кубат баскычын басыңыз.
- Баскычтоп киргизүү: Каалаган текстиңизди терүү үчүн QWERTY баскычтобун колдонуңуз. Текст LCD экранында пайда болот.
- Басып чыгаруу: басыңыз Басып чыгаруу button to print the label.
Image: A visual guide demonstrating the simple three-step process to operate the label maker.
3.2. Text Formatting and Special Functions
The D210S label maker includes a variety of built-in functions to customize your labels:
- Арип стилдери: Access 16 font styles using the dedicated Шрифт ачкыч.
- Белгилери: Choose from over 640 symbols using the Символ ачкыч.
- Кадрлар: Apply over 100 frames to your labels using the Frame ачкыч.
- Башка функциялар: Utilize keys for Size, Width, Barcode, History, Mirror, and more for advanced customization.
Image: The label maker showcasing its extensive library of frames, symbols, and font options for creative labeling.
3.3. Printing Multiple Labels
The D210S offers efficient options for printing multiple labels:
- Multi-Copy Editing: Use the multi-copy editing one-touch key to continuously edit and print up to 55 different labels. This is ideal for creating a series of unique labels without re-entering the menu.
- Printing Identical Labels: To print multiple copies of the same label, it is advisable to print them all at once and then cut them individually. You can specify the number of copies (1-9) by pressing Shift + Басып чыгаруу, then using the navigation keys or a number key, and finally pressing OK or Басып чыгаруу.
Image: A flowchart demonstrating how to use the multi-copy function for sequential label printing.
Image: A guide on how to efficiently print multiple identical labels using the Shift + Print key combination.
3.4. Clearing Text
To clear text or formatting:
- Delete Letters One by One: басыңыз BS (Backspace) ачкыч.
- Delete All Text and Format: Басыңыз Таза → OK → [Text & Format] → OK.
- Delete Text Only: Басыңыз Таза → [Текст гана] → OK.
Image: A step-by-step guide on using the Clear function to remove text or formatting from the label maker's display.
3.5. Using the Built-in Cutter
After printing, use the integrated cutter to cleanly separate your label from the tape roll. The cutter is located on the side of the device. Press the cutter lever firmly to cut the label.
3.6. Optimizing Label Tape Usage
To reduce label tape costs, it is recommended to set the label margin to "Narrow" in the device settings. Navigate to Орнотуулар → Маржа → Тар.
Image: A visual comparison highlighting the tape-saving benefit of using the 'Narrow' margin setting on the D210S.
4. Техникалык тейлөө
4.1. Тазалоо
To ensure optimal performance and print quality, regularly clean your label maker:
- Түзмөктүн сыртын жумшак, кургак чүпүрөк менен сүртүңүз.
- If the print head becomes dirty, gently wipe it with a cotton swab dampened with isopropyl alcohol. Ensure the device is turned off and disconnected from power before cleaning.
- Remove any dust or debris from the tape compartment.
4.2. Tape Replacement
When the label tape runs out or you wish to change tape types, follow the tape installation instructions in Section 2.3. Ensure you use compatible EazeID D210S label tapes for best results.
4.3. Сактоо
Store the label maker in a cool, dry place away from direct sunlight and extreme temperatures. If storing for an extended period, remove the AAA batteries to prevent leakage.
5. Кыйынчылыктарды
If you encounter issues with your EazeID D210S Label Maker, refer to the following common problems and solutions:
| Көйгөй | Мүмкүн себеп | Чечим |
|---|---|---|
| Түзмөк күйбөйт | Low or dead batteries; USB cable not connected properly; incorrect power adapter. | Replace AAA batteries; ensure USB Type-C cable is securely connected; use a compatible 5V power adapter. |
| Poor print quality (faint, blurry, or missing lines) | Dirty print head; incorrect tape installation; low tape quality. | Clean the print head (see Section 4.1); re-install label tape correctly; ensure you are using genuine EazeID D210S compatible tape. |
| Tape jams frequently | Improper tape installation; foreign objects in tape path; tape not feeding smoothly. | Re-install tape, ensuring it is seated correctly; check for and remove any obstructions; ensure tape is not creased or damaged. |
| Label not cutting properly | Кесүүчү миз мокок же бүтөлүп калган. | Ensure no tape residue is blocking the cutter; if issues persist, contact customer support. |
| Экрандагы ката билдирүү | Өзгөчө ката шарты. | Refer to the on-screen message for guidance. Common errors relate to tape issues (e.g., "Tape End"). Follow instructions or re-install tape. |
6. Техникалык шарттар
| Модель аты | D210S Gray Label Maker Machine |
| Бренд | EazeID |
| Басма технологиясы | Термикалык |
| Байланыш технологиясы | Баскычтоп |
| Максималдуу медиа өлчөмү | 12мм |
| Максималдуу түстүү басып чыгаруу чечими | 180 DPI |
| Максималдуу кара жана ак басып чыгаруу чечими | 203 DPI |
| Электр камсыздоо | Type-C Cable or 6 AAA Batteries |
| Продукциянын өлчөмдөрү | 5 x 5 x 2 дюйм |
| Элемент Салмагы | 1.26 фунт |
| Камтылган компоненттер | Label maker, Sample label tape, Type-C Cable, User Manual |
| Иштөө үчүн максималдуу көчүрмөлөр | 55 (different labels) |
7. Кепилдик жана колдоо
7.1. Кепилдик маалыматы
The EazeID D210S Label Maker comes with a limited warranty. Please refer to the warranty card included in your package or visit the official EazeID webкепилдик камтууга жана узактыгына байланыштуу толук шарттар жана шарттар үчүн сайт.
7.2. Кардарларды колдоо кызматы
For technical assistance, troubleshooting not covered in this manual, or inquiries about replacement parts and accessories, please contact EazeID customer support. Contact information can typically be found on the EazeID official webсайтында же продуктунун таңгагында.
8. Продукт видеолору
Бул колдонмого киргизүү үчүн берилген маалыматтарда сатуучунун расмий продукт видеолору табылган жок.
