1. Introduction and Overview
The BLUETTI 200W Solar Panel is a highly efficient and portable solution for harnessing solar energy. Designed to complement BLUETTI solar generators and other compatible power stations, it provides reliable power for various applications, from outdoor adventures to emergency backup.
Негизги өзгөчөлүктөр төмөнкүлөрдү камтыйт:
- 200W Solar Power: Offers substantial power output for charging compatible solar generators.
- High Cell Efficiency: Built with monocrystalline solar cells, achieving up to 23.4% conversion efficiency.
- Durable ETFE Coating: Provides resistance against scratches and water splashes, ensuring longevity in various environments.
- Бүктөлүүчү жана көчмө: Compact design (22.5 × 23.6 × 2.9 inches folded) and lightweight (17.2 lbs) for easy transport.
- Жөнгө салынуучу тепкичтер: Integrated kickstands allow for optimal angle adjustment to maximize sunlight absorption.
Figure 1.1: The BLUETTI 200W Solar Panel in its unfolded state, ready for use.
Figure 1.2: Illustration highlighting the high efficiency of the monocrystalline solar cells.
Figure 1.3: The solar panel demonstrating universal compatibility with different BLUETTI power stations.
2. Орнотуу
Setting up your BLUETTI 200W Solar Panel is straightforward. Follow these steps for optimal performance:
- Күн панелин ачуу: Carefully unfold the solar panel sections until it is fully extended.
- Deploy Kickstands: Locate the adjustable kickstands on the back of the panel. Extend them to support the panel.
- Бурчту тууралоо: Position the panel to face the sun directly. Use the adjustable straps on the kickstands to set the optimal angle, typically around 45 degrees, to maximize sunlight absorption.
- Электр станциясына туташуу: Connect the solar connector cable from the solar panel to the solar input port on your compatible BLUETTI power station. Ensure a secure connection.
Figure 2.1: The adjustable kickstands allow for precise angling towards the sun.
Figure 2.2: Connection diagrams for various BLUETTI models, illustrating the simple setup process.
3. Иштөө
Once set up, the BLUETTI 200W Solar Panel will begin converting sunlight into electricity to charge your power station. Observe the power station's display to monitor the charging input.
- Күндүн оптималдуу экспозициясы: For best results, ensure the panel is in direct sunlight with no shading. Adjust its position throughout the day to follow the sun's path.
- Partial Shading Performance: Thanks to its parallel wiring design, the BLUETTI solar panel performs better in partial shading compared to series-wired panels. However, minimizing shading is always recommended for maximum output.
- Мониторинг: Regularly check your power station's display for real-time input wattage and battery charge level.
Figure 3.1: Understanding the benefit of parallel wiring for improved performance under partial shading.
4. Техникалык тейлөө
Proper maintenance will extend the lifespan and efficiency of your solar panel:
- Тазалоо: Мезгил-мезгили менен күн панелинин бетин жумшак, гamp cloth to remove dust, dirt, or debris. Avoid abrasive cleaners or harsh chemicals.
- Текшерүү: Regularly inspect the panel and cables for any signs of damage, wear, or loose connections.
- Сактагыч: When not in use, fold the panel and store it in a dry, cool place away from direct sunlight and extreme temperatures. The durable ETFE coating helps protect against minor scratches and water splashes, but it is not designed for prolonged exposure to heavy rain or submersion.
5. Кыйынчылыктарды
If you encounter issues with your BLUETTI 200W Solar Panel, consider the following common troubleshooting steps:
- Эч кандай кубаттуулугу жок:
- Панелдин түздөн-түз күн нурунда жана көлөкө эмес экенин текшериңиз.
- Check all cable connections between the panel and the power station to ensure they are secure.
- Verify that the power station's solar input is enabled (if applicable).
- Төмөн кубаттуулугу:
- Adjust the panel's angle to face the sun directly. The optimal angle changes with the time of day and season.
- Clean the panel surface to remove any dirt or dust obstructing sunlight.
- Ensure no partial shading from trees, buildings, or other objects.
- Environmental factors like cloud cover or haze can reduce output.
- Туташуу маселелери:
- Confirm that the solar connector is fully inserted into the power station's input port.
- Inspect the cables for any visible damage or kinks.
If problems persist after following these steps, please contact BLUETTI customer support for further assistance.
6. Техникалык шарттар
| Атрибут | Нарк |
|---|---|
| Бренд | BLUETTI |
| Модель номери | 200W Күн панели |
| Материал | монокристалл Кремний |
| Продукциянын өлчөмдөрү (ачылган) | 89.2"L x 23.2"W x 1.99"H |
| Элемент Салмагы | 16.1 фунт |
| Натыйжалуулук | 23.4% чейин |
| Туташтыргыч түрү | Solar Connector (MC4 compatible) |
| Максималдуу томtage | 26.1 вольт |
| Максималдуу күч | 200 Ватт |
| Түс | Кара |
7. Кепилдик жана колдоо
The BLUETTI 200W Solar Panel comes with a 12 айлык кепилдик сатып алынган күндөн тартып. Кепилдик дооматтары үчүн сатып алганыңыздын далилин сактап коюңуз.
For detailed information, troubleshooting guides, or to contact customer support, please refer to the official BLUETTI website or the user manual PDF:
- Колдонуучунун колдонмосу (PDF): PDF колдонмосун жүктөп алыңыз
- BLUETTI Official Store: Visit BLUETTI Store on Amazon
BLUETTI is committed to providing excellent after-sales service. Do not hesitate to reach out if you have any questions or require assistance.
