Geevon GN-228614C-T3-US

Geevon Digital Atomic Wall Clock (Model GN-228614C-T3-US) Instruction Manual

Орнотуу, иштетүү жана тейлөө боюнча комплекстүү колдонмо.

1. Киришүү

This manual provides detailed instructions for the setup, operation, and maintenance of your Geevon Digital Atomic Wall Clock with Moon Phase and Backlight (Model GN-228614C-T3-US). Please read this manual thoroughly before using the product to ensure proper function and longevity.

2. Эмнелер камтылган

Таңгактан чыгарганда, бардык компоненттердин бар экендигин текшериңиз:

Note: 3 AAA batteries for the main unit and 2 AAA batteries for the outdoor sensor are required but not included.

3. Орнотуу

3.1. Негизги блокту кубаттоо

The main unit can be powered by either the included AC/DC power adapter or 3 AAA batteries (not included).

  1. AC кубатын колдонуу: Connect the AC/DC power adapter to the clock's power input port and plug it into a standard electrical outlet.
  2. Батареяларды колдонуу: Open the battery compartment on the back of the clock and insert 3 new AAA batteries, observing the correct polarity (+/-).
Back of Geevon Digital Atomic Wall Clock showing battery compartment and control buttons.

Image: Back of the main clock unit with the battery compartment open, showing where to insert 3 AAA batteries. Control buttons are visible above the compartment.

Geevon Atomic Wall Clock powered by batteries, showing the battery compartment.

Image: Close-up of the back of the clock showing the battery compartment and inserted batteries. A "Low Battery Indicator" graphic is also present.

3.2. Installing the Outdoor Sensor

The wireless outdoor sensor requires 2 AAA batteries (not included).

  1. Сырткы сенсордун арткы жагындагы батарея бөлүмүн ачыңыз.
  2. Insert 2 new AAA batteries, observing the correct polarity (+/-).
  3. Батарея отсегин жабыңыз.
  4. Place the sensor in a covered outdoor location, such as under a patio or porch, to protect it from direct sunlight and rain. Ensure it is within 200 feet (60 meters) of the main unit.
Geevon Digital Atomic Wall Clock with its outdoor sensor placed on a patio table, showing the sensor's placement.

Image: The main clock unit on a table indoors and the outdoor sensor mounted on an exterior wall, illustrating the wireless connection.

Video: This video demonstrates how to install batteries in both the main clock unit and the outdoor sensor, and how the outdoor sensor transmits temperature data to the main unit. It also shows the clock's display and various features in action.

3.3. Initial Synchronization and Time Zone Setting

The clock automatically attempts to synchronize with the WWVB atomic clock signal from Fort Collins, Colorado. This process can take 2-5 days for initial synchronization, especially if the signal is weak. During signal reception, the backlight will temporarily turn off for 1-2 minutes to avoid interference.

To manually set the time zone and other settings:

  1. Press and hold the "MODE" button for 3 seconds. The hour display will start to flash. Use the "UP" or "DOWN" buttons to set the correct hour.
  2. Press "MODE" to confirm and move to the minute setting. Use "UP" or "DOWN" to set the correct minute.
  3. Continue pressing "MODE" to cycle through year, month, and date settings, adjusting each with "UP" or "DOWN".
  4. After setting the date, the Daylight Saving Time (DST) display will flash. Use "UP" or "DOWN" to turn DST on or off as applicable.
  5. Next, the Time Zone display will flash. Use "UP" or "DOWN" to select your time zone (EST, AST, HST, AKST, PST, MST, CST).
  6. Finally, the temperature unit (°C/°F) will flash. Use "UP" or "DOWN" to select your preferred unit.
  7. Press "MODE" again to confirm all settings and end the setting procedures, entering the normal mode.
Geevon Digital Atomic Wall Clock displaying time and date, with an illustration of daylight saving time adjustment.

Image: The clock display showing time, date, and temperature, with graphics illustrating "Spring Forward" (+1h) and "Fall Back" (-1h) for Daylight Saving Time.

Back of Geevon Digital Atomic Wall Clock showing control buttons and a map of US time zones.

Image: Close-up of the back of the clock, highlighting the control buttons (LIGHT, MEM, 12/24, ALARM, SNZ, CH, DOWN UP/RCC, MODE) and a map of US time zones (PST, MST, CST, EST, AKST, HST, AST).

Video: This video demonstrates how to install batteries in both the main clock unit and the outdoor sensor, and how the outdoor sensor transmits temperature data to the main unit. It also shows the clock's display and various features in action.

4. Иштөө нускамалары

4.1. Display Overview

The 8.8-inch LCD TN HD display shows the following information:

Geevon Digital Atomic Wall Clock displaying time, date, moon phase, indoor and outdoor temperatures.

Image: The clock's large LCD display showing all its features, including time, day, date, moon phase, indoor and outdoor temperatures, and temperature trends. Dimensions of the clock are also indicated.

4.2. Арткы жарыкты башкаруу

The clock features 3 brightness levels: Off, Dim, and Bright. The backlight behavior depends on the power source:

Geevon Digital Atomic Wall Clock showing three backlight levels: High, Low, and Off.

Image: The clock display shown with three different backlight settings: High, Low, and Off, demonstrating the adjustable brightness feature.

Video: This video demonstrates the three backlight brightness levels (Off, Dim, Bright) of the Geevon Atomic Wall Clock and how to adjust them by touching the top button. It also shows the clock in various room settings.

4.3. Ойготкуч жана тындыруу функциясы

The clock includes an alarm with a snooze feature:

Geevon Digital Atomic Wall Clock with alarm and snooze icons, showing a person waking up.

Image: The clock display with icons for "Ascending Beep" and "5-minute Snooze", illustrating the alarm features. A person is shown waking up in bed.

4.4. Температура бирдигин которуу

To switch between Celsius (°C) and Fahrenheit (°F) for temperature display, press the "UP/RCC" button on the back of the clock during normal operation.

4.5. Max/Min Temperature Records

The clock records the daily minimum and maximum indoor and outdoor temperatures. Press the "MEM" button on the back of the clock to view these records. Press it again to cycle through current, maximum, and minimum readings.

5. Жайгаштыруу параметрлери

The Geevon Digital Atomic Wall Clock offers versatile placement options:

Geevon Digital Atomic Wall Clock showing both tabletop stand and wall hanging options.

Image: The clock is shown with its foldable stand for tabletop use and also with hanging holes for wall mounting, illustrating its two placement methods.

For optimal performance, place both the main unit and the outdoor sensor at least 3 feet (1 meter) away from electronic devices such as TVs, computers, microwaves, or radios, as these can cause electromagnetic interference.

6. Техникалык тейлөө

7. Кыйынчылыктарды

КөйгөйМүмкүн себепЧечим
Негизги блокто дисплей жок.Кубат жок же өлүп калган батарейкалар.Ensure AC adapter is properly connected or replace batteries.
Сырткы температура көрсөтүлгөн эмес же так эмес.Outdoor sensor batteries dead, out of range, or interference.Replace sensor batteries. Move sensor closer to the main unit. Ensure no large metal objects or electronics are between units.
Атомдук убакыт синхрондоштурулбайт.Weak WWVB signal, interference, or incorrect time zone.Ensure correct time zone is set. Move clock to a location with better signal reception (e.g., near a window, away from electronics). Allow 2-5 days for initial synchronization. Signal reception is usually better at night.
Backlight not staying on (when using AC power).Кубат адаптери туташкан эмес же туура эмес.Ensure AC adapter is securely plugged in. If problem persists, contact support.

8. Техникалык шарттар

9. Кепилдик жана колдоо

Geevon is committed to providing high-quality products and excellent customer service. If you encounter any issues or have questions regarding your Geevon Digital Atomic Wall Clock, please contact our customer support team. We offer lifetime consulting services and are available 24/7 online.

For support, please refer to the contact information provided with your purchase or visit the official Geevon webсайт.

Тектеш документтер - GN-228614C-T3-US

Preview Troubleshooting Steps for Geevon Atomic Alarm Clock
Comprehensive troubleshooting guide for the Geevon Atomic Alarm Clock, addressing WWVB signal reception issues, time zone settings, DST, and environmental interference.
Preview Geevon санариптик дубал сааты термометр менен T208614 Колдонуучунун колдонмосу
Geevon T208614 Термометри бар санарип дубал сааты үчүн комплекстүү колдонуучу колдонмосу, чоо-жайын, өзгөчөлүктөрүн, иштешин жана ички/тышкы температураны көзөмөлдөө, убакытты синхрондоштуруу жана ойготкуч функцияларын оңдоо.
Preview GEEVON T208614C-1 Санарип дубал сааты Термометр колдонуучу колдонмосу
GEEVON T208614C-1 Термометри бар санарип дубал сааты үчүн колдонуучунун колдонмосу. Түзмөгүңүздү кантип орнотуу, иштетүү жана көйгөйлөрдү чечүү жолдорун, анын ичинде ички/тышкы температура, ойготкуч, календарь жана айдын фазасы сыяктуу функцияларды үйрөнүңүз.
Preview Geevon W22145 Color Atomic Clock User Manual - Time, Temperature, Humidity, Alarm
User manual for the Geevon W22145 Color Atomic Clock. Learn how to set up, use features like radio-controlled time, temperature/humidity display, alarm, snooze, and backlight. Includes technical specifications and placement guidelines.
Preview Geevon Atomic Clock W230342: User Manual and Features
This user manual provides comprehensive instructions for the Geevon Atomic Clock (Model W230342), covering its features, setup, button functions, alarm settings, temperature and humidity monitoring, RCC time synchronization, DST adjustments, and more.
Preview Geevon Auto-Dim Atomic Clock User Manual
User manual for the Geevon Auto-Dim Atomic Clock (Item No. 22116), providing instructions on setup, operation, and maintenance.