1. Продукт бүтүп калдыview
The Learning Resources Rechargeable Code & Go Robot Mouse is an educational toy designed to introduce children to basic coding concepts. This programmable mouse follows a step-by-step path created using double-sided coding cards. It features lights, sounds, and two speed settings for versatile play on various surfaces. The mouse is rechargeable, eliminating the need for frequent battery replacements.
Сүрөт: бүттүview of ages and skills developed by the Code & Go Robot Mouse.
2. Пакеттин мазмуну
Пакетте бардык компоненттер бар экенин текшериңиз:
- 1 x Code & Go® Robot Mouse Rechargeable
- 1 x USB-C кубаттоочу шнуру
- 30 x Double-sided Coding Cards
- 1 x Activity Guide
Image: All components included in the Rechargeable Code & Go Robot Mouse set.
3. Орнотуу
3.1 Charging the Robot Mouse
- Locate the USB-C charging port on the underside or side of the Robot Mouse.
- Connect the provided USB-C charging cord to the mouse.
- Plug the other end of the USB-C charging cord into a standard USB power adapter (not included) or a computer's USB port.
- The mouse will indicate charging status (e.g., an indicator light). Allow sufficient time for a full charge before first use.
Image: The Robot Mouse connected to its USB charging cable.
3.2 Алгачкы текшерүү
Before use, inspect the Robot Mouse and coding cards for any damage. Ensure the mouse's wheels move freely and the buttons are responsive.
4. Иштөө нускамалары
4.1 Understanding the Coding Cards
The set includes 30 double-sided coding cards. Each card represents a specific command:
- Forward Arrow: Move the mouse forward one step.
- Left Turn Arrow: Turn the mouse 90 degrees to the left.
- Right Turn Arrow: Turn the mouse 90 degrees to the right.
- Action Card (e.g., lightning bolt): Special actions or sounds (refer to Activity Guide for details).
4.2 Planning a Path
Use the coding cards to visually plan the mouse's route. Lay out the cards in a sequence that will guide the mouse from a starting point to a desired destination. This step helps in visualizing the code before programming.
Image: A child planning a path for the Robot Mouse using coding cards.
4.3 Programming the Mouse
- Turn on the Robot Mouse using the power switch (usually on the underside).
- Press the corresponding colored buttons on the mouse that match the sequence of your planned coding cards. For example, if your first card is a forward arrow, press the forward button on the mouse.
- The mouse will light up and make sounds to confirm each command input.
- To clear a program, press the reset button (often indicated by a circular arrow or 'X' symbol).
Image: A child programming the Robot Mouse by pressing command buttons.
4.4 Executing the Code
After programming the sequence, place the Robot Mouse at the starting point. Press the 'Go' button (often a green button or play symbol) to execute the programmed commands. Observe if the mouse follows the intended path.
4.5 Ылдамдыкты жөндөө
The Robot Mouse features two speed settings. Refer to the Activity Guide for instructions on how to switch between speeds, typically via a button or switch on the mouse.
5. Кароо жана тейлөө
- Тазалоо: Wipe the Robot Mouse and coding cards with a soft, dry cloth. Do not use abrasive cleaners or immerse in water.
- Сактагыч: Store all components in a cool, dry place away from direct sunlight when not in use. Keep small parts away from young children.
- Батареяга кам көрүү: Recharge the mouse regularly to maintain battery health. Avoid fully depleting the battery for extended periods.
6. Кыйынчылыктарды
- Чычкан жооп бербей жатат:
Ensure the mouse is turned on and fully charged. If the battery is low, recharge it. Clear any previous programming by pressing the reset button. - Mouse not moving correctly:
Verify that the programmed sequence of commands matches the intended path. Check for any obstructions on the surface where the mouse is operating. Ensure the wheels are clean and free of debris. - Баскычтар иштебейт:
Confirm the mouse is powered on. If specific buttons are unresponsive, try a full reset of the mouse. If the issue persists, contact customer support. - Заряддоо көрсөткүчү иштебей жатат:
Ensure the USB-C cable is securely connected to both the mouse and the power source. Try a different USB port or power adapter.
7. Техникалык шарттар
| Өзгөчөлүк | Деталь |
|---|---|
| Модель номери | LER2873 |
| Продукциянын өлчөмдөрү | 6.3 x 6.2 x 0.1 дюйм |
| Элемент Салмагы | 9.3 унция |
| Сунушталган Жаш | 4 жаш жана андан жогору |
| Power Source | Rechargeable Battery (non-replaceable) |
| Заряддоо интерфейси | USB-C |
8. Кепилдик маалыматы
This product is covered by a standard return policy. For specific details regarding returns or exchanges, please refer to the retailer's policy where the product was purchased. No explicit manufacturer's warranty information is provided in the product details.
9. Кардарларды колдоо кызматы
For further assistance, questions, or to report issues, please visit the official Learning Resources webсайтына кириңиз же алардын кардарларды тейлөө бөлүмүнө кайрылыңыз. Байланыш маалыматын, адатта, бренддин расмий веб-сайтынан тапса болот webсайт:
