1. Коопсуздук маалыматы
Operating a laser engraver requires adherence to strict safety protocols to prevent injury and equipment damage. This device is a Class 4 laser product.
- Көздү коргоо: Always wear approved laser safety glasses that block the specific wavelength of the fiber laser (typically 1064nm) when the machine is in operation.
- Вентиляция: Ensure adequate ventilation to remove fumes and particles generated during engraving, especially when working with various materials.
- Шашылыш токтотуу: Familiarize yourself with the location and function of the emergency stop button. In case of any malfunction or hazard, press this button immediately.
- Өрт коопсуздугу: Keep a fire extinguisher nearby. Do not leave the machine unattended during operation.
- Материалдык шайкештик: Only engrave materials known to be safe for fiber lasers. Avoid materials that produce toxic fumes or are highly flammable.
- Ыйгарым укуктуу персонал: Only trained and authorized individuals should operate the laser engraver.
2. Продукт бүтүп калдыview
The Monport 50W Fiber Laser Engraver YXF50 is designed for precise marking and engraving on various metal surfaces. It features a robust design and user-friendly components.
Негизги өзгөчөлүктөрү
- 50W Raycus Fiber Laser Булагы: Provides a powerful laser output of 50000mW with an estimated lifetime of up to 100,000 hours, suitable for marking metals like stainless steel, gold, silver, and brass.
- Өркүндөтүлгөн жумуш мейкиндиги: Equipped with a 7.9" x 7.9" (200mm x 200mm) work area, featuring a built-in grid and removable positioning bars for accurate material placement. Supports an optional rotary axis (not included) for cylindrical objects.
- Кызыл чекит көрсөткүчү: An external red dot locator assists in quick and accurate laser focus setup and previewing the engraving area.
- Кол менен Фокус: A focus-height wheel and a vertical supporting tower with a ruler allow for precise manual focusing on different material thicknesses.
- Enhanced Configuration: Includes two cooling fans for improved heat dissipation and an integrated power supply for stable operation. Features a consolidated power button and an emergency panic button for safety.
Компоненттер
Сүрөт: бүттүview of the Monport 50W Fiber Laser Engraver with key components labeled.
- GALVO-TECH System: The galvanometer scanning system responsible for directing the laser beam.
- Бийиктикти жөндөө баскычы: Used to manually adjust the height of the laser head for focusing.
- туткасы: For safe and convenient handling of the laser unit.
- Field Lens: Focuses the laser beam onto the material surface.
- Кубат баскычы: Controls the main power to the unit.
- Fiber Optic Transmission Line: Carries the laser beam from the source to the galvanometer head.
- Scaleplate: A ruler on the vertical support for precise height measurements.
- Иш столу: The platform where materials are placed for engraving, featuring a grid and positioning bars.
3. Орнотуу
3.1 Пакеттен чыгаруу
- Бардык компоненттерди таңгактан кылдаттык менен алып салыңыз.
- Inspect all parts for any signs of damage during transit. Contact support immediately if damage is found.
- Retain original packaging for future transport or storage.
3.2 Ассамблея
- Place the main laser unit on a stable, level surface.
- Connect the fiber optic transmission line securely between the laser source and the galvanometer head.
- Ensure all cables are properly routed and secured to prevent interference with moving parts.
3.3 Кубат туташтыруу
- Connect the power cable to the integrated power supply unit.
- Plug the power cable into a grounded electrical outlet. Verify the voltage машинанын талаптарына дал келет.
3.4 Программалык камсыздоону орнотуу
The Monport 50W Fiber Laser Engraver is compatible with LightBurn software and is based on EZCAD2. Ensure you have the correct software version installed.
- Install the necessary drivers and software from the provided USB drive or manufacturer's webсайт.
- For LightBurn compatibility, ensure you are using a version that supports BSL lasers.
- Connect the engraver to your computer via the USB cable.
Image: The Monport 50W Fiber Laser Engraver fully assembled and ready for operation.
4. Иштөө нускамалары
4.1 Күйгүзүү
- Бардык коопсуздук чараларын, анын ичинде лазердик коргоочу көз айнек тагынууну камсыз кылыңыз.
- Ачкычты ачкычтын которгучуна салып, аны "ON" абалына буруңуз.
- Press the main power button to activate the laser engraver.
Image: Close-up of the upgraded button design, showing the key switch, power button, and emergency stop button.
4.2 Material Placement
- Place your material securely on the worktable. Utilize the built-in grid and removable positioning bars for precise alignment.
- If using an optional rotary axis, ensure it is correctly installed and calibrated according to its specific instructions.
4.3 Фокустоо
Оптималдуу гравюра натыйжалары үчүн так фокустоо абдан маанилүү.
- Кол менен Фокус: Rotate the focus-height wheel on the laser head to adjust its vertical position. Use the scaleplate on the vertical supporting tower to measure and set the correct focal height for your material.
- Red Dot Guidance: Activate the external red dot locator. The two red dots should converge into a single point on the surface of your material when the laser is perfectly in focus.
Image: The laser engraver demonstrating the red light preview feature for focusing and positioning.
4.4 Software Usage and Engraving Process
- Open your preferred software (LightBurn or EZCAD2) on your computer.
- Дизайныңызды импорттоңуз же түзүңүз.
- Adjust laser parameters (power, speed, frequency) according to your material and desired engraving effect. Refer to material testing guides for initial settings.
- Use the red dot pointer to preview the engraving path on your material to ensure correct placement.
- Initiate the engraving process from the software. Monitor the machine closely during operation.
Image: Various applications of the fiber laser engraver, including marking on keyboards, metal, electronic equipment, circuitry, and jewelry.
5. Техникалык тейлөө
Үзгүлтүксүз техникалык тейлөө сиздин Monport булалуу лазердик гравёруңуздун узак мөөнөттүү иштешин жана оптималдуу иштешин камсыз кылат.
- Линзаны тазалоо: Periodically inspect and clean the field lens using specialized lens cleaning solutions and wipes to prevent dust and debris from affecting laser performance.
- Жумуш ордун тазалоо: Keep the worktable and surrounding area clean from debris and residue.
- Кабелдик текшерүү: Regularly check all power and data cables for wear, damage, or loose connections.
- Муздатуу системасы: Ensure the cooling fans are free from obstructions and functioning correctly to maintain proper heat dissipation.
- Программалык камсыздоо жаңыртуулары: Keep your engraving software and drivers updated to the latest versions for compatibility and performance improvements.
6. Кыйынчылыктарды
Бул бөлүмдө сиз иштөө учурунда кабылышы мүмкүн болгон жалпы маселелер каралат.
| Маселе | Мүмкүн себеп | Чечим |
|---|---|---|
| Лазер атылбайт | Кубат туташкан жок, авариялык өчүрүү күйгүзүлдү, программалык камсыздоо катасы, лазер булагы маселеси. | Check power connections, ensure emergency stop is disengaged, restart software, contact support if laser source is suspected. |
| Гравюра сапаты начар | Incorrect focus, wrong laser parameters (power/speed), dirty lens, material issues. | Verify focus using the red dot pointer, adjust power/speed settings, clean the field lens, ensure material is suitable. |
| Кызыл чекит көрсөткүчү көрүнбөйт же туура эмес жайгаштырылган | Red dot laser off, misalignment. | Ensure red dot laser is activated. If misaligned, refer to the calibration section in the full user manual or contact support for guidance on recalibration. |
| Программалык камсыздоо машинага туташпай жатат | USB cable issue, driver not installed, incorrect software version. | Check USB cable and port, reinstall drivers, ensure LightBurn version supports BSL lasers. |
7. Техникалык шарттар
Detailed technical specifications for the Monport 50W Fiber Laser Engraver YXF50.
| Спецификация | Деталь |
|---|---|
| Модель номери | YXF50 |
| Laser Power Output | 50 Вт (50000 мВт) |
| Laser Source Type | Raycus була лазери |
| Лазердик класс | 4-класс |
| Лазердин болжолдуу иштөө мөөнөтү | 100,000 саатка чейин |
| Жумуш аймагы | 7.9" x 7.9" (200 мм x 200 мм) |
| Шайкеш материалдар | Metal, Brass, Stainless Steel, Gold, Silver, etc. |
| Программалык камсыздоонун шайкештиги | LightBurn, EZCAD2 |
| Элемент Салмагы | 45 фунт (болжол менен 20.4 кг) |
| Пакеттин өлчөмдөрү | 25 x 16 x 15 дюйм (болжол менен 63.5 x 40.6 x 38.1 см) |
| Өндүрүүчү | Монпорт |
| Түс | Көк |
Image: The Monport 50W Fiber Laser Engraver with its physical dimensions indicated.
8. Кепилдик жана колдоо
For warranty information, technical support, or service inquiries, please contact Monport Direct, the manufacturer and seller of this product.
- Кепилдиктин конкреттүү шарттары жана шарттары үчүн сатып алуу документтериңизден караңыз.
- Contact information for Monport Direct can typically be found on their official webсайт же сатып алуу платформасы аркылуу.
- When contacting support, please have your model number (YXF50) and purchase date available.
