IMOUMLIVE 8 дюймдук мини зымсыз чынжырлуу араа колдонуучусунун колдонмосу

1. Киришүү

This manual provides essential information for the safe operation, maintenance, and troubleshooting of your IMOUMLIVE 8-inch Mini Cordless Chainsaw. Please read this manual thoroughly before initial use to ensure proper handling and to prevent injury or damage.

The IMOUMLIVE 8-inch Mini Cordless Chainsaw is designed for light to medium-duty cutting tasks such as trimming branches, pruning trees, and cutting small logs. It features a brushless motor, auto-oiling system, and comes with two 3.0Ah batteries for extended use.

2. Маанилүү коопсуздук нускамалары

Электр шаймандарын иштетүүдө өрт, электр шок жана жеке жаракат алуу коркунучун азайтуу үчүн ар дайым негизги коопсуздук чараларын сактаңыз.

Жалпы коопсуздук эрежелери:

• Толук колдонмону окуп чыгыңыз: Understand all instructions and warnings before operating the chainsaw.
• Тийиштүү жеке коргонуу каражаттарын (ЖКК) кийиңиз: Always wear safety goggles, gloves, hearing protection, and sturdy footwear. A hard hat and face shield are also recommended.
• Maintain a safe working area: Keep the area clear of bystanders, children, and pets. Ensure good footing and balance.
• Inspect the chainsaw before each use: Check for loose parts, damage, or wear. Ensure the chain is properly tensioned and lubricated.
• Кокусунан баштоодон сактаныңыз: Ensure the safety lock is engaged when not cutting and remove the battery during assembly, adjustment, or cleaning.
• аша чаап албаңыз: Ар дайым туура бутту жана тең салмактуулукту сактаңыз.
• Be aware of kickback: Kickback can occur when the moving chain contacts an object at the upper tip of the guide bar or when the wood closes in and pinches the saw chain in the cut. Avoid cutting with the tip of the guide bar.
• Use both hands: Always operate the chainsaw with both hands firmly gripping the handles.
• Нымдуу шарттарда иштебеңиз: Avoid using the chainsaw in rain or damp чөйрөлөр.
• Коопсуз сактоо: When not in use, store the chainsaw in a dry, secure place out of reach of children.

Image: Safety features of the IMOUMLIVE mini chainsaw, highlighting the goggles, handguard, handles, and safety lock for user protection.

3. Продукциянын компоненттери

Familiarize yourself with the parts of your IMOUMLIVE mini chainsaw.

Image: Labeled diagram of the chainsaw components, including the lubrication system, safety switch, splash guards, brushless motor, and battery compartment.

• Гид тилкеси: The metal bar that supports and guides the saw chain.
• Араа чынжыр: The cutting chain that rotates around the guide bar.
• Handguard/Splash Guards: Protects the operator's hand from debris and the chain.
• Алдыңкы туткасы: For gripping the chainsaw with the non-dominant hand.
• Арткы туткасы: For gripping the chainsaw with the dominant hand, containing the trigger and safety lock.
• Коопсуздук кулпу баскычы: Кокусунан башталышын алдын алат.
• Trigger Switch: Activates the motor when pressed.
• Батарея бөлүмү: Кайра заряддоого болгон батарейканы камтыйт.
• Oil Reservoir/Lubrication System: Автоматтык чынжырды майлоо үчүн.
• чынжыр чыңдоочу: Mechanism for adjusting chain tension.
• Brushless Motor: Provides efficient and powerful cutting.

4. Пакеттин мазмуну

Пакетиңизде бардык буюмдар бар экенин текшериңиз:

Image: The complete package contents, showing the chainsaw, two batteries, charger, case, goggles, and assembly tools.

• 1 x IMOUMLIVE 8-inch Mini Cordless Chainsaw
• 2 х 3.0Ач литий-иондук батарейкалар
• 1 батарейки х
• 1 x Гид тилкеси
• 2 x Saw Chains (one pre-installed, one spare)
• 1 x Ташуу кутусу
• 1 x коргоочу көз айнек
• 1 x Screwdriver/Wrench Tool
• 1 x User Manual

5. Орнотуу жана чогултуу

5.1. Батареяны кубаттоо

1. Батареяны заряддагычка салыңыз.
2. Заряддагычты стандарттуу электр розеткасына сайыңыз.
3. The indicator light on the battery will show charging status. A full charge typically takes approximately 1 hour.
4. Толук заряддалгандан кийин батареяны алып салыңыз.

Image: The 3.0Ah batteries, indicating their capacity and charging time.

5.2. Багыттоочу тилкени жана чынжырды орнотуу

Эскертүү: Ensure the battery is removed before performing any assembly or maintenance.

1. Чынжырдын тарткычынын туткасын бошотуп, каптал капкакты алып салыңыз.
2. Place the saw chain around the sprocket and guide bar, ensuring the cutting edges face the correct direction (refer to chain direction indicator on the guide bar).
3. Fit the guide bar onto the mounting studs, ensuring the chain is seated correctly in the guide bar groove.
4. Replace the side cover and partially tighten the tensioner knob.
5. Adjust the chain tension (see Section 7.2).
6. Fully tighten the tensioner knob once tension is correct.

5.3. Adding Chain Oil (Auto-Oiler)

The chainsaw features an automatic oiling system. Use only high-quality bar and chain oil.

1. Locate the oil reservoir cap on the top of the chainsaw body.
2. Unscrew the cap and fill the reservoir with bar and chain oil. Do not overfill.
3. Капкакты бекем ордуна коюңуз.
4. Иштеп жатканда майдын деңгээлин мезгил-мезгили менен текшерип, зарыл болсо, кайра толтуруңуз.

Image: Demonstrating the process of adding lubricating oil to the chainsaw's auto-oiling system.

6. Иштөө нускамалары

6.1. Араны ишке киргизүү

1. Ensure the battery is fully charged and securely inserted into the chainsaw.
2. Араны эки колу менен бекем кармаңыз.
3. Press and hold the safety lock button (usually located on the side of the handle).
4. While holding the safety lock, squeeze the trigger switch to start the motor.
5. Release the safety lock button once the motor starts, but continue to hold the trigger for operation.

Image: The safety lock and trigger mechanism, designed for secure operation.

6.2. Кесүү техникасы

• Always plan your cut: Identify the direction of fall and clear the area.
• Start with a stable stance: Ensure firm footing and balance.
• Engage the chain before contacting wood: Allow the chain to reach full speed before beginning the cut.
• Let the saw do the work: Apply light pressure. Forcing the saw can lead to kickback or damage.
• Avoid cutting with the tip: This is the primary cause of kickback.
• Be mindful of pinching: When cutting branches under tension, make relief cuts to prevent the saw from getting pinched.

Image: The chainsaw in action, demonstrating its cutting capability on a log.

Сүрөт: Мисamples of the chainsaw's versatility in different cutting applications.

6.3. Чынжырлуу арааны токтотуу

Release the trigger switch. The chain will stop rotating. Always engage the safety lock when not actively cutting.

7. Техникалык тейлөө

Regular maintenance ensures optimal performance and extends the life of your chainsaw. Always remove the battery before performing any maintenance.

7.1. Тазалоо

• After each use, clean sawdust and debris from the guide bar, chain, and motor housing.
• Use a brush or compressed air. Do not use water or solvents.
• Ensure the oil reservoir and cap are clean.

7.2. Чынжырдын чыңалуусун жөндөө

Proper chain tension is crucial for safe and efficient operation. A chain that is too loose can derail, and a chain that is too tight can cause excessive wear and damage.

1. Loosen the side cover knob slightly.
2. Turn the chain tensioner screw (usually located near the guide bar) clockwise to tighten the chain or counter-clockwise to loosen it.
3. The chain is correctly tensioned when it can be pulled away from the guide bar by about 1/8 to 1/4 inch (3-6 mm) at the center, and still snaps back into place.
4. Once tension is correct, firmly tighten the side cover knob.

Image: Diagram illustrating the automatic chain adjuster and other key features.

7.3. Chain Sharpening/Replacement

• A dull chain will cut slowly and require more force. Sharpen the chain regularly using a suitable round file (refer to chain specifications for correct file өлчөмү).
• If the chain is damaged or excessively worn, replace it with a new IMOUMLIVE 8-inch replacement chain.

8. Кыйынчылыктарды

9. Техникалык шарттар

10. Кепилдик жана колдоо

IMOUMLIVE offers a 365-day replacement policy and 24/7 customer service for this product.

For warranty claims, technical support, or any inquiries, please contact IMOUMLIVE customer service through the retailer where the product was purchased or visit the official IMOUMLIVE store online.

Эскертүү: The extension pole is sold separately and is not included with this chainsaw model.

Image: The chainsaw shown with an optional extension pole, which is sold separately.