SuperATV Polaris Ranger Full-Size 570 Vented Full Rear Windshield Instruction Manual

1. Киришүү

Thank you for choosing the SuperATV Vented Full Rear Windshield for your Polaris Ranger Full-Size 570. This product is designed to enhance your riding experience by providing protection from the elements and controlling airflow within the cab. Please read this manual thoroughly before installation and use to ensure proper fitment, safe operation, and longevity of your windshield.

2. Коопсуздук маалыматы

• Орнотуу учурунда ар дайым тиешелүү коопсуздук каражаттарын, анын ичинде көздү коргоочу каражаттарды кийиңиз.
• Ensure the vehicle is parked on a level surface with the engine off and parking brake engaged before beginning installation.
• Do not overtighten hardware, as this may damage components.
• Regularly inspect the windshield and mounting hardware for any signs of wear or damage. Replace components as necessary.
• This windshield is made from durable polycarbonate, but extreme impacts can still cause damage.

3. Пакеттин мазмуну

Verify that all components are present before beginning installation. The package should include:

• 1x SuperATV Vented Full Rear Windshield (pre-assembled)
• All necessary mounting hardware (clamps, seals, bolts, etc.)
• Орнотуу көрсөтмөлөрү (бул колдонмо)

If any parts are missing or damaged, please contact SuperATV customer support immediately.

4. Орнотуу (Орнотуу)

The SuperATV Vented Full Rear Windshield is designed for a straightforward installation. While it comes pre-assembled with hardware, some steps require careful attention. It is recommended to have a second person assist with the installation.

4.1 Шайкештик боюнча эскертүүлөр

• Шайкеш эмес with the formed Pro-fit cage. This windshield is designed to work only with the round tube cage.
• Can be used with most soft or hard tops.

4.2 Орнотуу кадамдары

1. Унааны даярдоо: Park your Polaris Ranger on a flat, stable surface. Turn off the engine and engage the parking brake.
2. Алдын ала айнекти жайгаштырыңыз: Carefully lift the rear windshield and align it with the rear roll cage of your vehicle.
3. Мөөрлөрдү бекитиңиз: The windshield features a flexible PVC plastic trim with an attached EPDM rubber bulb seal. Ensure this seal sits tightly against the vehicle's body to prevent water intrusion. Internal metal clips and strong gripping 'tongues' are designed to provide a secure, rattle-free fit.

Figure 1: Detail of the No Leak Seal, showing its components for a tight, waterproof fit.

4. Clamps: Utilize the provided lock-tight, high-strength ABS clampс. Бул clamps are designed to resist impact damage and stay secure. They feature tough rip-stop Velcro straps for a tight, no-rattle fit and a rubberized strap coating to prevent slippage.

Figure 2: Detail of the mounting clamps, illustrating the Velcro straps and ABS construction.

3-сүрөт: Clamp attached to the roll bar, demonstrating secure fitment.

5. Аппаратты бекемдөө: Gradually tighten all clamps and hardware. Avoid overtightening. Ensure the windshield is securely mounted and does not rattle.
6. Акыркы текшерүү: Once installed, gently push and pull on the windshield to confirm it is stable and all connections are secure.

Figure 4: SuperATV Vented Full Rear Windshield installed on a Polaris Ranger, rear view.

5-сүрөт: Арткы view of the Polaris Ranger with the windshield fully installed.

5. Operating the Vents

The SuperATV Vented Full Rear Windshield features integrated BreezeRite vents, allowing you to control airflow within your vehicle's cab.

5.1 Vent Positions

The BreezeRite vents can be adjusted to three distinct positions:

• Ачык: For maximum airflow, ideal for warmer conditions or when increased ventilation is desired.
• Half-Open: Provides moderate airflow, balancing ventilation with protection from dust or light rain.
• Жабык: Blocks airflow completely, offering maximum protection from cold, dust, rain, or debris. This position also helps eliminate the suction effect often experienced with only a front windshield, which can draw in dust and leaves.

6-сүрөт: Интерьер view showing the BreezeRite vents on the rear windshield.

Figure 7: Close-up of a BreezeRite vent.

Figure 8: Detail of the BreezeRite vent mechanism.

6. Техникалык тейлөө

Proper maintenance will extend the life and clarity of your polycarbonate windshield.

• Тазалоо: Use a soft cloth or sponge and a mild soap solution (e.g., dish soap and water) to clean the windshield. Avoid abrasive cleaners, brushes, or harsh chemicals (like ammonia-based cleaners) as these can scratch or damage the polycarbonate.
• Чайкоо: Бардык самын калдыктарын кетирүү үчүн таза суу менен жакшылап чайкаңыз.
• Кургатуу: Air dry or use a clean, soft microfiber cloth to gently blot dry. Do not wipe vigorously when dry, as this can cause scratches.
• Текшерүү: Periodically check all mounting hardware for tightness. If any components appear loose or damaged, re-tighten or replace them as needed.

7. Кыйынчылыктарды

• Шаңгыраган ызы-чуу: If you experience rattling, check all mounting clamps and hardware. Ensure they are securely tightened. The rubber bulb seal and gripping tongues are designed to prevent rattling, so verify their proper seating.
• Loose Fit: If the windshield feels loose, re-check the tightness of all clamps. Ensure the Velcro straps are pulled taut and the rubberized coating on the clamps is making full contact with the roll bar.
• Суу агып кетиши: Inspect the rubber bulb seal around the edges of the windshield. Ensure it is properly seated and making full contact with the vehicle's body. If a seal is damaged or missing, contact SuperATV for a replacement.
• Орнотуудагы кыйынчылык: Installation can be a tight fit and may require patience. Ensure the windshield is correctly aligned with the roll cage. If specific components like the bottom snap-on roll bar devices are popping out, ensure they are fully engaged or consider additional securing methods if necessary, as noted by some users.

8. Техникалык шарттар

9. Кепилдик маалыматы

Specific warranty details for SuperATV products are typically provided at the point of purchase or on the manufacturer's official website. Please refer to the SuperATV website or your purchase documentation for comprehensive warranty terms and conditions.

10. Колдоо

For technical assistance, missing parts, or any questions regarding your SuperATV Vented Full Rear Windshield, please contact SuperATV customer support directly. Contact information can typically be found on the SuperATV official webсайт (www.superatv.com).