Firecore G60 4x360 жашыл нурлуу лазердик деңгээл колдонуучусунун колдонмосу

1. Киришүү

This manual provides detailed instructions for the safe and effective operation, maintenance, and troubleshooting of your Firecore G60 4x360 Green Beam Laser Level. Please read this manual thoroughly before using the device to ensure proper functionality and to prevent potential hazards.

The Firecore G60 is a versatile 4-plane laser level designed for various construction and alignment tasks. It projects four self-leveling 360° green laser planes, offering comprehensive coverage for floors, walls, and ceilings.

2. Коопсуздук маалыматы

WARNING: LASER RADIATION. Do not stare into the beam. Class II laser product. Do not remove or deface any product labels. Do not allow children to operate the tool.

• Always wear appropriate eye protection when operating the laser level.
• Лазердик нурга түздөн-түз көз тийбеңиз.
• Do not attempt to modify or disassemble the laser level. Repairs should only be performed by authorized service personnel.
• Ensure the work area is clear of obstructions and potential tripping hazards.
• Аппаратты суудан жана экстремалдык температурадан алыс кармаңыз.

3. Пакеттин мазмуну

Төмөндө тизмеленген нерселердин баары пакетиңизге камтылганын текшериңиз:

• 1 x Firecore G60 Laser Level
• 2 x Rechargeable Li-ion Batteries (4000mAh)
• 1 x Алыстан башкаруу
• 1 х дубал кашаа
• 1 x Steel Sheet
• 1 x Type-C заряддоо кабели
• 1 х заряддагыч
• 1 x 360-Degree Rotating Base
• 1 x Lifting Base
• 1 x Hard Carry Case
• 1 х Колдонуучунун колдонмосу (бул документ)

Image: The complete Firecore G60 laser level kit, showing all included accessories neatly arranged.

4. Продукт бүтүп калдыview

The Firecore G60 laser level features a robust design with multiple laser emitters to provide comprehensive 360-degree coverage. Key components include the laser emission windows, control panel, battery compartment, and mounting points.

Image: The Firecore G60 laser level demonstrating its 4x360 degree green laser lines for full room coverage.

5. Орнотуу

5.1 Батареяны орнотуу

1. Аппараттагы батарея бөлүкчөсүн табыңыз.
2. Insert a fully charged Li-ion battery into the compartment, ensuring correct polarity.
3. Батарея отсегин бекем жабыңыз.

5.2 Баштапкы күйгүзүү

1. Place the laser level on a stable, level surface or mount it using the provided accessories.
2. Slide the ON/OFF switch to the 'ON' position. The device will typically start in self-leveling mode.
3. Observe the laser lines. If the device is outside its self-leveling range (±4°), the laser lines will flash rapidly to indicate an out-of-level condition. Adjust the device's position until the lines become steady.

6. Иштөө режимдери

6.1 Өзүн-өзү тегиздөө режими

When the pendulum lock is in the unlocked position and the device is powered on, it enters self-leveling mode. The laser will automatically level itself within ±4° in approximately 3 seconds. If the device is tilted beyond this range, the laser lines will flash to alert the user.

Image: The laser level operating in self-leveling mode (top) and manual mode (bottom).

6.2 Кол режими

To activate manual mode, ensure the pendulum lock is in the locked position before powering on the device. In this mode, the laser lines can be projected at any desired angle, which is useful for tasks like installing handrails or decorative patterns.

6.3 Импульс режими

Pulse mode extends the working range of the laser level, allowing it to be used with a compatible laser detector (e.g., Firecore FD30) for outdoor or bright light conditions. In pulse mode, the laser lines are detectable up to 165 feet.

Image: Demonstrating pulse mode with a laser detector for extended range.

6.4 Жарыктыкты жөндөө

The laser level features 3 gear brightness adjustment. This allows you to optimize visibility based on ambient light conditions and conserve battery life. Adjust brightness using the control panel buttons or the remote control.

7. Тиркемелер

The Firecore G60 is suitable for a wide range of applications:

• Tiling Installation: The 360° floor horizontal line is ideal for precise tile layout.
• Шыпты орнотуу: The top 360° horizontal line assists with ceiling grid alignment and fixture installation.
• Wall Alignment: Two 360° vertical lines cross at 90° angles, facilitating accurate wall construction, picture hanging, and cabinet installation.
• General Layout: Provides all-around leveling coverage for various indoor and outdoor construction projects.

Image: Using the ground-level horizontal line for floor inspection and tiling.

Image: Laying floor tiles with the laser level on a lifting base for precise height adjustment.

8. Заряддоо

The Firecore G60 uses two 4000mAh Li-ion batteries, each providing up to 5 hours of runtime. The batteries can be charged separately or while installed in the device.

Заряддоо ыкмалары:

• Direct Plugging: Connect the Type-C charging cable directly to the laser tool while the battery is installed.
• Батареяны заряддоо: Remove the battery and connect the Type-C charging cable to the port on the battery itself.
• Power Bank: The Type-C port allows charging via a power bank for convenience on job sites.

Battery indicators on the battery pack show the current charge level. Charging protection prevents overcharging.

Image: Multiple charging methods for the Firecore G60 laser level.

9. Алыстан башкаруу

The included remote control allows for convenient adjustment of laser lines and brightness without needing to directly interact with the device. This saves time and effort, especially when the laser level is positioned in hard-to-reach areas.

Image: Using the remote control to adjust the laser level.

10. Техникалык тейлөө

• Тазалоо: жумшак колдонуу, damp cloth to clean the device. Do not use abrasive cleaners or solvents. Keep the laser emission windows clean for optimal performance.
• Сактагыч: Store the laser level in its hard carry case in a dry, cool place when not in use. Ensure the pendulum lock is engaged during storage and transport to protect the internal mechanism.
• Батареяга кам көрүү: Charge batteries regularly, even if not in use, to maintain their lifespan. Avoid fully discharging batteries for extended periods.

11. Кыйынчылыктарды

12. Техникалык шарттар

13. Кепилдик жана колдоо

Firecore provides a 24-month after-sale service and lifetime technical support for the G60 laser level. If you have any concerns, questions, or require assistance, please do not hesitate to contact us.

Байланыш электрондук почтасы: support@FIRECORETools.com