1. Киришүү
This manual provides comprehensive instructions for the installation, operation, and maintenance of your AERMEC AER503IR built-in thermostat. Please read this manual carefully before installation and use to ensure proper function and safety.
The AERMEC AER503IR is designed for built-in installation in a 503 box and features a touchpad control with a backlit display, specifically for air conditioning systems.
2. Коопсуздук маалыматы
- Always disconnect power before installing or servicing the thermostat.
- Орнотуу бардык жергиликтүү жана улуттук электр эрежелерине ылайык квалификациялуу электрик тарабынан жүргүзүлүшү керек.
- Do not touch the electronic board with bare hands to avoid damage from electrostatic discharge.
- Ensure all wiring connections are secure and correct to prevent fire or electric shock.
- Do not overtighten the fixing screws during installation.
- Бул аппарат үй ичинде колдонуу үчүн гана иштелип чыккан.
3. Продукт бүтүп калдыview
The AERMEC AER503IR thermostat features a clear digital display and intuitive touchpad controls for managing your air conditioning system.
Сүрөт 3.1: Алдыңкы view of the AERMEC AER503IR thermostat, showing the digital display and touchpad controls.
Негизги өзгөчөлүктөрү:
- Touchpad control for easy operation.
- Backlit display for visibility in various lighting conditions.
- Designed for air conditioner specific use.
- Manual control type.
4. Орнотуу
The AERMEC AER503IR is designed for built-in installation in standard 502 (2-module) and 503 (3-module) flush-mounted boxes. Follow these steps for proper installation:
- Орнотууну баштоодон мурун, негизги автоматтык өчүргүчтөн электр кубаты өчүрүлгөнүн текшериңиз.
- Open the AER503IR accessory using a flat-head screwdriver as shown in the diagram.
- Carefully remove the protective film from the display after installation is complete.
- Mount the thermostat into the chosen flush-mounted box (502, 503, or round 2-module box) using the provided screws. Ensure the "ALTO-UP" indicator is facing upwards.
- Connect the wiring according to the wiring diagram in Section 5.
- Secure the thermostat firmly but do not overtighten the fixing screws.
Figure 4.1: Installation steps for the AERMEC AER503IR thermostat into various flush-mounted boxes (502, 503, and round 2-module). Note the "ALTO-UP" orientation and the use of a screwdriver to open the unit.
5. Электр схемасы
Refer to the following diagram for electrical connections (I/O characteristics). Ensure all connections are made correctly before restoring power.
Figure 5.1: Electrical wiring diagram for the AERMEC AER503IR thermostat, detailing input/output connections for fan speed control, valve control, power supply, and sensor inputs.
Туташуу пункттары:
- N: Neutral input for power supply and valves.
- L: Line input for power supply.
- PE: Power supply ground.
- Y2, Y1, V1, V2, V3: Outputs for fan speed control (minimum, medium, maximum) and valve control (2-pipe, 4-pipe, resistance/Coldplasma).
- DC1, DC2: Analog outputs (0-10Vdc) for inverter fan control and modulating valve control.
- SA: Additional ambient probe input.
- GND: Ground for additional ambient probe and water probe.
- SW: Water probe input.
- CE1, CE2: Multifunction input (refer to dedicated chapter for functions).
6. Баштапкы орнотуу
After successful installation and power restoration, the thermostat will power on. The backlit display will illuminate. Follow the on-screen prompts or refer to the full product manual for detailed initial configuration steps, including setting the current time, day, and desired temperature range.
- Күйгүзүү: Once wired correctly and power is supplied, the thermostat display should light up.
- Негизги Орнотуулар: Use the touchpad controls to navigate through the menu. Typically, you will need to set the current time, day of the week, and desired temperature setpoints for heating and cooling modes.
- Режим тандоо: Select the operating mode (e.g., Cool, Heat, Auto, Fan Only) as required for your air conditioning system.
7. Операция
The AERMEC AER503IR thermostat is operated via its integrated touchpad. The backlit display provides clear feedback on current settings and status.
Негизги башкаруу элементтери:
- Температураны жөндөө: Use the up/down arrows on the touchpad to adjust the desired temperature setpoint.
- Режим тандоо: Press the mode button to cycle through available operating modes (e.g., Cooling, Heating, Fan, Auto).
- желдеткич ылдамдыгы: If applicable, use the fan button to select desired fan speed (e.g., Low, Medium, High, Auto).
- Дисплейдин арткы жарыгы: The display is backlit for easy viewing.
For advanced programming features, such as scheduling or specific fan operations, please consult the detailed product manual provided with your thermostat.
8. Техникалык тейлөө
The AERMEC AER503IR thermostat requires minimal maintenance to ensure optimal performance and longevity.
- Тазалоо: Gently wipe the display and touchpad with a soft, dry, or slightly damp cloth. Do not use abrasive cleaners, solvents, or chemical sprays, as these can damage the surface or internal components.
- Чаңды тазалоо: Periodically, gently dust the vents (if any) to ensure proper airflow and temperature sensing.
- Батареяны алмаштыруу: If your model is battery-powered, replace batteries when the low battery indicator appears on the display. Use the specified battery type.
- Кесиптик текшерүү: It is recommended to have your HVAC system and thermostat inspected by a qualified technician annually to ensure efficient operation.
9. Кыйынчылыктарды
If you encounter issues with your AERMEC AER503IR thermostat, refer to the following common problems and solutions. For more complex issues, contact customer support.
| Көйгөй | Мүмкүн себеп | Чечим |
|---|---|---|
| Термостаттын дисплейи бош. | No power supply; loose wiring; dead batteries (if applicable). | Check circuit breaker. Verify wiring connections. Replace batteries. |
| System not responding to thermostat settings. | Incorrect mode selected; wiring issue; system malfunction. | Ensure correct mode (Cool/Heat/Auto). Check wiring. Consult HVAC technician. |
| Температураны окуу туура эмес көрүнөт. | Термостат жылуулук булагынын жанында жайгашкан; сенсор маселеси. | Ensure thermostat is not exposed to direct sunlight or drafts. Contact support if issue persists. |
| Touchpad unresponsive. | Temporary glitch; physical damage. | Try cycling power to the thermostat. If damaged, contact support for replacement. |
10. Техникалык шарттар
| Өзгөчөлүк | Деталь |
|---|---|
| Бренд | AERMEC |
| Модель аты | Termostato AER503IR |
| Элемент моделинин номери | TX |
| Түс | Ак |
| Тtage | 230 вольт |
| Өзгөчө өзгөчөлүк | Арткы жарык |
| Элемент Салмагы | 1 килограмм |
| Controller Type | Кол менен башкаруу |
| Белгилүү продуктуларды колдонуу | Кондиционер |
| Температураны көзөмөлдөө түрү | Санарип |
| Камтылган компоненттер | Монтаждоо куту |
| Power Source | Батарея менен иштейт |
| Пакеттин өлчөмдөрү | 20 x 10 x 10 см |
Эскертүү: Техникалык мүнөздөмөлөр эскертүүсүз өзгөртүлүшү мүмкүн.
11. Кепилдик жана колдоо
For warranty information and technical support, please refer to the documentation included with your purchase or visit the official AERMEC webсайт. Кепилдик дооматтар үчүн сатып алганыңыздын далилин сактаңыз.
Байланыш маалыматы: Сураныч, өндүрүүчүнүн расмий өкүлүнө кайрылыңыз website or your local distributor for contact details regarding customer service and technical assistance.
