ZIPRO RAVE көнүгүү велосипедин колдонуучунун колдонмосу

1. Киришүү

Thank you for choosing the ZIPRO RAVE Exercise Bike. This manual provides essential information for the safe assembly, operation, and maintenance of your new fitness equipment. The ZIPRO RAVE is designed to offer an effective and comfortable indoor cycling experience, featuring advanced magnetic resistance and smart connectivity options. Please read this manual thoroughly before using the exercise bike to ensure proper usage and to maximize its lifespan.

2. Коопсуздук боюнча маанилүү маалымат

Before beginning any exercise program, consult with your physician. This is especially important for individuals over the age of 35 or those with pre-existing health conditions. Failure to follow these safety instructions could result in serious injury or damage to the equipment.

• Always place the exercise bike on a flat, stable surface. Ensure there is adequate clear space around the bike (at least 0.6 meters or 2 feet).
• Keep children and pets away from the equipment during operation. This exercise bike is not a toy.
• Inspect the equipment before each use for loose parts, wear, or damage. Do not use if any components are damaged.
• Тийиштүү көнүгүү кийимин жана спорттук бут кийимди кийиңиз. Кыймылдуу бөлүктөргө илинип калышы мүмкүн болгон кенен кийимдерден качыңыз.
• The maximum user weight for this exercise bike is 120 kg (264 lbs). Do not exceed this limit.
• Колдонуудан мурун, бардык болттор жана гайкалар бекем бекитилгенин текшериңиз.
• Do not attempt to adjust the seat or handlebars while the bike is in use.
• Disconnect the power cable when the bike is not in use or during cleaning/maintenance.

3. Монтаждоо боюнча нускамалар

Assembly typically requires two people and takes approximately 40-60 minutes. All necessary tools are usually included. Follow the steps below carefully.

1. Компоненттерди таңгактан чыгаруу: Carefully remove all parts from the packaging. Lay them out and compare them with the parts list provided in the separate assembly guide to ensure all components are present.
2. Стабилизаторлорду тиркөө: Secure the front and rear stabilizer bars to the main frame using the provided bolts and washers. Ensure they are firmly tightened to provide a stable base.
3. Педалдарды орнотуу: Identify the left (L) and right (R) pedals. The left pedal screws counter-clockwise, and the right pedal screws clockwise. Thread them carefully into the crank arms and tighten securely.
4. Орундуктун мамысын жана отургучун орнотуу: Орундуктун мамысын негизги рамкага салып, жөндөө баскычын колдонуп, каалаган бийиктикте бекитиңиз. Орунду отургучтун мамысына бекитиңиз.
5. Рулдун мамысын жана рулдарын орнотуу: Connect the handlebar post to the main frame. Attach the handlebars to the handlebar post. Ensure all cables for the console are properly connected before securing the handlebar post.
6. Connect Console: Carefully connect the console cables to the corresponding ports on the handlebar post. Mount the console onto its bracket.

Figure 3.1: Fully assembled ZIPRO RAVE Exercise Bike.

4. Initial Setup and Adjustments

Proper setup ensures comfort and effectiveness during your workout.

• Жайгашкан жери: Position the exercise bike on a level surface. The transport wheels (Figure 4.1) at the front base allow for easy relocation. Simply tilt the bike forward and roll it to your desired spot.


Figure 4.1: Transport wheels for easy relocation.

• Орундукту жөндөө: The seat can be adjusted both vertically and horizontally (Figure 4.2).
  • Вертикалдуу тууралоо: Loosen the knob on the vertical seat post, slide the seat to your desired height, and tighten the knob securely. Your leg should have a slight bend at the knee when the pedal is at its lowest point.
  • Горизонталдуу тууралоо: Loosen the knob beneath the seat, slide the seat forward or backward to achieve a comfortable distance from the handlebars, and tighten the knob.


Figure 4.2: Seat adjustment points for vertical and horizontal positioning.

• Рулду тууралоо: The handlebar angle can be adjusted (Figure 4.3) to suit your riding posture. Loosen the adjustment knob at the base of the handlebars, tilt them to a comfortable angle, and re-tighten the knob firmly.


Figure 4.3: Handlebar angle adjustment.

• Кубат туташуу: Connect the power adapter to the bike's power input and then to a standard electrical outlet. The console will power on.

5. Иштөө нускамалары

The ZIPRO RAVE exercise bike features an intuitive console and various training programs to enhance your workout.

5.1 Console Overview

Figure 5.1: Console display and control buttons.

Консол машыгуунун негизги көрсөткүчтөрүн көрсөтөт:

• Убакыт: Машыгуунун узактыгы.
• Ылдамдыгы: Учурдагы велосипед ылдамдыгы.
• Аралык: Жалпы аралык басып өткөн.
• Калориялар: Болжолдуу күйгөн калория.
• RPM: Мүнөтүнө айлануулар (педалдын каденциясы).
• ВАТТ: Чыгаруучу кубаттуулук ватт менен.
• Импульс: Heart rate (measured via hand pulse sensors on handlebars).

5.2 Каршылыкты жөндөө

The ZIPRO RAVE features 32 electro-magnetic resistance levels. Use the '+' and '-' buttons on the console to increase or decrease the resistance during your workout. Higher numbers indicate greater resistance.

5.3 Окуу программалары

The console offers a variety of pre-set programs to diversify your training:

• Кол режими: Allows you to freely adjust resistance as desired.
• 11 Sport Programs: Pre-designed workout profiles with varying resistance levels to target different fitness goals.
• 4 HRC (Heart Rate Control) Programs: These programs automatically adjust resistance to keep your heart rate within a target zone. Ensure you are holding the hand pulse sensors for accurate readings.
• 1 WATT Program: Maintains a constant power output (WATT) regardless of your pedaling speed.
• 3 жекече программа: Allows you to create and save your own custom workout profiles.
• Body Fat Function: Measures and displays an estimate of your body fat percentage.
• Артка саноо функциясы: Set a target for time, distance, or calories, and the console will count down during your workout.

Refer to the detailed console manual (if provided separately) for specific instructions on navigating and selecting programs.

5.4 Bluetooth байланышы жана тиркемелерди интеграциялоо

The ZIPRO RAVE is equipped with Bluetooth connectivity, allowing you to connect to popular fitness applications like Zwift and Kinomap. This enhances your training experience with virtual routes, structured workouts, and social features.

Figure 5.4: Tablet holder and Bluetooth connectivity for fitness apps.

• Жупташтыруу: Enable Bluetooth on your smartphone or tablet. Open your preferred fitness app (e.g., Zwift, Kinomap) and follow the app's instructions to search for and connect to the ZIPRO RAVE exercise bike.
• Смартфон/планшет кармагыч: A dedicated holder is integrated into the console (Figure 5.4) to securely place your device during workouts, allowing you to easily view app content or enjoy entertainment.

6. Техникалык тейлөө

Regular maintenance helps ensure the longevity and optimal performance of your exercise bike.

• Тазалоо: Ар бир колдонгондон кийин велосипедди жарнама менен сүртүп туруңузamp терди жана чаңды тазалоо үчүн кездеме. Абразивдүү тазалагычтардан же эриткичтерден качыңыз.
• Текшерүү: Мезгил-мезгили менен бардык болтторду, гайкаларды жана кыймылдуу бөлүктөрдү бекемдигин жана эскирбестигин текшерип туруңуз. Ар кандай бошогон бекиткичтерди бекемдеңиз.
• Pedals and Straps: Ensure the pedal straps are in good condition and securely hold your feet. The pedals feature a non-slip pattern for safety.
• Сактагыч: Store the exercise bike in a dry, cool place away from direct sunlight and extreme temperatures.

7. Кыйынчылыктарды

Бул бөлүм сиз кабылышы мүмкүн болгон жалпы көйгөйлөрдү карайт.

If you encounter problems not listed here or if solutions do not resolve the issue, please contact ZIPRO customer support.

8. Продукттун спецификациялары

9. Кепилдик жана колдоо

For warranty information, technical support, or to order replacement parts, please contact ZIPRO customer service. Keep your purchase receipt as proof of purchase.

Байланыш маалыматы: Refer to the contact details provided with your product packaging or visit the official ZIPRO webсайт.