1. Киришүү
Thank you for choosing the AINAVI AMP-D4 4 каналдуу 1200 ватт толук диапазондогу A/B классындагы стерео кубаттуулук Amplifier. This manual provides detailed instructions for the proper installation, operation, and maintenance of your new car audio ampкөтөргүч. Оптималдуу аткарууну жана коопсуздукту камсыз кылуу үчүн орнотууга же иштетүүдөн мурун бул колдонмону кылдат окуп чыгыңыз.
The AMP-D4 is designed to enhance your vehicle's audio system, delivering powerful and clear sound. It features a robust Class A/B design, efficient heat dissipation, and versatile controls for a customized audio experience.
2. Продукциянын өзгөчөлүктөрү
- 4-Channel Full Range Class A/B Ampөмүр берүүчү: Delivers 1200 Watts Maximum Peak Power, with RMS Power at 2 Ohms: 300 Watts x 4 CH, and RMS Power at 4 Ohms: 90 Watts x 4 CH.
- Жалпы шайкештик: Adopts 12V-16V power input, suitable for various vehicles including Cars, Trucks, SUVs, RVs, and vans.
- Натыйжалуу муздатуу: Features a 2*30A Fuse, built-in cooling fans, and an all-aluminum alloy body with an efficient heat dissipation design for reliability and performance.
- Жөнгө салынуучу башкаруу каражаттары: User-adjustable controls include Gain, Variable LPF (Low Pass Filter), HPF (High Pass Filter), and Bass EQ Switch (0, +6, +12 dB).
- Мыкты байланыш: Equipped with 8 Gauge Power and Ground Input Terminals, and 4 Gauge Power & Ground Input Terminals for maximum current flow.
- Аудио аткаруу: Frequency Response: 10Hz - 30KHz, Signal Noise Ratio: >96 dB.
- Коргоо схемасы: Features 4-Way Protection Circuitry for enhanced safety and durability.
Figure 2.1: AINAVI AMP-D4 Amplifier highlighting its 1200W power, high efficiency, and sound quality.
3. Техникалык шарттар
| Өзгөчөлүк | Спецификация |
|---|---|
| Бренд | АЙНАВИ |
| Модел | AMP-D4 |
| Каналдар | 4-канал |
| Ampжашоо класс | А/Б классы |
| Максималдуу кубаттуулук | 1200 Ватт |
| RMS Power at 2 Ohms | 300 Watts x 4 CH |
| RMS Power at 4 Ohms | 90 Watts x 4 CH |
| Тtage Киргизүү | 12V-16V (DC) |
| Frequency Response | 10Гц - 30КГц |
| Сигналдын ызы-чуусу | >96 дБ |
| Power/Ground Input Terminals | 8 Gauge / 4 Gauge |
| Фузер | 2 * 30А |
| Монтаж түрү | бурун |
4. Коопсуздук маалыматы
Always ensure the vehicle's battery is disconnected before beginning any electrical installation. Improper wiring can lead to electrical shorts, damage to the amplifier, or vehicle electrical systems. Consult a professional if you are unsure about any installation steps. Ensure all connections are secure and insulated to prevent accidental contact.
5. Орнотуу боюнча колдонмо
This section outlines the steps for installing the AINAVI AMP-D4 amplifier. Proper installation is crucial for optimal performance and safety.
5.1. Орнотууга даярдоо
Before starting, gather all necessary tools and components, including the amplifier, wiring kits (power, ground, remote, speaker, RCA cables), screwdrivers, wire strippers, and electrical tape. Ensure the vehicle's battery is disconnected.
5.1-сүрөт: Amplifier compatibility modes for speaker and subwoofer configurations.
5.2. Ampliifier Wiring
Кубат, жерге жана алыскы зымдарды туташтырыңыз amplifier. The power cable (+12V) connects to the positive terminal of the car battery (via an inline fuse), the ground cable (GND) connects to a solid metal point on the vehicle chassis, and the remote turn-on wire (REM) connects to the head unit's remote output. Connect speaker wires to the appropriate channels (CH1-CH4) and RCA cables for audio input.
5.2-сүрөт: Amplifier connection terminals and control panel.
- Кубат туташуу: Connect the main power cable to the +12V terminal on the amplifier. Ensure the cable is properly stripped and secured.
- Жерге туташуу: Connect the ground cable to the GND terminal. This cable should be as short as possible and securely fastened to a clean, unpainted metal surface on the vehicle chassis.
- Алыстан күйгүзүү: Connect the remote turn-on wire to the REM terminal. This wire signals the ampбаш бирдиги активдүү болгондо күйгүзүү үчүн көтөргүч.
- Динамик байланыштары: Connect your speaker wires to the CH1, CH2, CH3, and CH4 output terminals. Pay attention to polarity (+ and -). For bridged mode (e.g., for a subwoofer), connect to the designated bridged terminals.
- Аудио киргизүү: RCA кабелдерин башкы бирдигиңизден туташтырыңызamp чыгарат amplifier's input jacks (Input CH1/CH2, Input CH3/CH4).
5.3. Routing Wires
Route the power cable, ground cable, remote wire, speaker wires, and RCA cables carefully. It is recommended to route power cables and audio cables separately to prevent interference and noise. Secure all cables to prevent them from moving or getting pinched.
5.4. Connecting to Head Unit
Connect the RCA cables and remote turn-on wire to the corresponding outputs on your car's head unit. Ensure all connections are firm and correctly matched (e.g., Front Left RCA to Front Left input, etc.).
5.5. Батареяны туташтыруу
Connect the main power cable (with the inline fuse) to the positive terminal of the car battery. Ensure the fuse holder is easily accessible for maintenance. Connect the ground wire to a suitable chassis ground point, ensuring a clean metal-to-metal contact.
6. Операция
After installation, reconnect the car battery. Turn on your car's ignition and head unit. The amplifier should power on automatically via the remote turn-on wire. Adjust the amplifier's settings (Gain, LPF, HPF, Bass EQ) to match your audio system and personal preferences. Start with low gain settings and gradually increase until desired volume and clarity are achieved without distortion.
Figure 6.1: Enjoying enhanced audio with the AMP-D4 ampөмүрлүү.
7. Техникалык тейлөө
Regularly check all wiring connections for tightness and corrosion. Ensure the amplifier's cooling fins are free from dust and debris to maintain optimal heat dissipation. Avoid exposing the amplifier to excessive moisture or extreme temperatures. If the fuse blows, replace it with a fuse of the same rating (2*30A).
8. Кыйынчылыктарды
- Кубат жок: Check the power cable connection at the battery and amplifier, the ground connection, and the remote turn-on wire. Verify the inline fuse is intact.
- Үн жок: Check all RCA audio input connections and speaker wire connections. Ensure the head unit is sending an audio signal and the amplifier's gain is not set too low.
- Бурмаланган үн: азайтыңыз amplifier's gain setting. Check for proper speaker impedance matching. Ensure speaker wires are not shorting.
- Noise/Humming: Ensure power and audio cables are routed separately. Check for proper grounding.
- AmpЛифтердин ашыкча ысып кетиши: айланасында жетиштүү желдетүүнү камсыз кылуу amplifier. Check for proper impedance matching of speakers.
9. Кепилдик жана колдоо
For warranty information and technical support, please refer to the warranty card included with your product or visit the official AINAVI webсайт. Сатып алуу квитанциясын кепилдик дооматтары үчүн сатып алуунун далили катары сактаңыз.
