1. Киришүү
The Fortin EVO-AUDT2 is an advanced all-in-one low-current remote starter, immobilizer bypass, and CAN alarm system kit designed specifically for 2017-2022 Audi vehicles. This system integrates seamlessly with your vehicle's existing electronics, offering enhanced convenience and security features. It includes a factory-fit T-Harness for simplified installation and utilizes a self-learning algorithm for automatic vehicle detection and configuration.
2. Продукциянын өзгөчөлүктөрү
The EVO-AUDT2 system is equipped with several key features to provide a robust and user-friendly experience:
- 3 On-board LEDs: For simplified programming and diagnostics, providing visual feedback on system status.
- Factory Fit T-Harness: Ensures an easy and direct plug-and-play installation, minimizing the need for wire cutting.
- 2-way Datalink Port (RS-232): Enables data-to-data communication with compatible remote starters and security systems for expanded functionality.
- 20 Pin General Purpose Plug: Allows for wire-to-wire connections with remote starters and security systems that are not datalink-equipped.
- Self-Learning Algorithm: Automatically detects the vehicle during programming and adjusts settings accordingly, simplifying the setup process.
- Built-in CAN Alarm System: Provides an integrated security solution.
- Remote Start from OEM Remote: Allows you to start your vehicle using your factory key fob (lock-lock-lock sequence).
- Immobilizer Bypass: Integrates with the vehicle's immobilizer system for seamless remote starting.
- Door Lock and Unlock Control: Provides control over vehicle doors.
- Шайкештик: Works with most automatic transmission vehicles.
Figure 2.1: ашыкview of EVO-ALL Product Features, highlighting engine remote start, convenience features, compatibility with Fortin and EVO Mobile, built-in CAN alarm, remote start from OEM remote, works with automatic transmissions, door lock/unlock, customization with Flashlink, built for heavy weather, and quick-connect T-Harness cabling.
3. Орнотуу жана орнотуу
Installation of the Fortin EVO-AUDT2 system is designed to be straightforward, especially with the included T-Harness. However, professional installation is highly recommended to ensure proper functionality and to avoid damage to your vehicle's electrical system.
3.1 Компоненттер бүттүview
Figure 3.1: The Fortin EVO-AUDT2 kit, showing the main module, product box, and various T-harness connectors for vehicle integration.
Figure 3.2: The Fortin EVO-AUDT2 module with the included T-Harness, illustrating the direct connection points for simplified installation.
3.2 Модуль байланыштары
The EVO-AUDT2 module features various ports for connection to the vehicle and other accessories:
- Programming Switch: Used for initial setup and configuration.
- Main Harness (20-pin 750mA): Highly versatile input and outputs for primary connections.
- TB Controller: Specific port for the TB controller.
- RS232 Datalink Port: For communication with compatible remote starters.
- CAN Port: Features 3 SAE certified CAN transceivers for vehicle data communication.
- Relays Port: Includes 3 programmable on-board relays (1x 25A and 2x 1A).
3.3-сүрөт: Детальдуу view of the Fortin EVO-AUDT2 module's connection ports, including the programming switch, main harness, TB controller, RS232 datalink port, CAN port, and relays port.
3.3 Programming and Vehicle Detection
After physical installation, the module's self-learning algorithm will automatically detect your vehicle during the programming sequence. Follow the specific programming instructions provided by Fortin for your vehicle model, typically involving a series of ignition cycles and button presses. The on-board LEDs will guide you through the process.
4. Иштөө нускамалары
Once installed and programmed, the Fortin EVO-AUDT2 system enhances your vehicle's functionality:
4.1 Remote Start
To remotely start your Audi, typically press the 'Lock' button on your factory OEM remote three times in quick succession (Lock-Lock-Lock). The vehicle's lights will flash, and the engine will start. The vehicle will remain locked and secure.
4.2 Entering the Vehicle After Remote Start
After remote starting, unlock your vehicle using your OEM remote. Enter the vehicle, insert your key into the ignition (if applicable), turn it to the 'ON' or 'RUN' position, and then press the brake pedal. This will transfer control from the remote start system to the vehicle's ignition system.
4.3 Сигнал системасы
The built-in CAN alarm system provides security. Refer to the detailed Fortin installation guide for specific alarm features and how they integrate with your vehicle's sensors.
4.4 Ыңгайлаштыруу
Advanced users or installers can customize various settings using Fortin Flashlink Programmers. This allows for fine-tuning of features such as run time, door lock options, and sensor sensitivities.
5. Техникалык тейлөө
The Fortin EVO-AUDT2 system is designed for reliability and requires minimal maintenance. Ensure that all connections remain secure and free from moisture or debris. Periodically check for any loose wiring or signs of wear. Keep the module clean and dry. No user-serviceable parts are inside the module.
6. Кыйынчылыктарды
If you encounter issues with your EVO-AUDT2 system, consider the following troubleshooting steps:
6.1 Status LED
The three on-board LEDs provide crucial diagnostic information:
- Көк LED: Indicates data communication.
- Сары LED: Indicates ignition status.
- Кызыл LED: Indicates transponder bypass status.
Figure 6.1: The three status LEDs on the Fortin EVO-AUDT2 module, indicating Blue for data communication, Yellow for ignition, and Red for transponder bypass.
Consult the detailed Fortin installation guide for specific LED flash codes and their meanings, which can help pinpoint the source of a problem.
6.2 Жалпы маселелер
- Remote Start Not Activating: Ensure your vehicle doors are closed, hood is closed, and the parking brake is engaged (if required by your vehicle). Check battery voltage.
- Эч кандай байланыш: Verify all harness connections are secure. Check the datalink port connection if using a compatible remote starter.
- Vehicle Not Detecting Module: Re-attempt the programming sequence. Ensure the correct firmware is loaded for your specific vehicle model year.
For persistent issues, it is recommended to contact a certified Fortin installer or Fortin technical support.
7. Техникалык шарттар
Key specifications for the Fortin EVO-AUDT2 Evo-All & T-Harness:
| Спецификация | Деталь |
|---|---|
| Модель номери | EVO-AUDT2 |
| Бренд | Fortin |
| Өндүрүүчү | ФОРТИН |
| Шайкештик | 2017-2022 Audi vehicles |
| Туташтыргыч түрү | 20-pin, T-connector |
| UPC | 770350003906 |
| Өзгөчөлүктөрү | Remote Starter, Immobilizer Bypass, CAN Alarm System, Datalink Port, On-board LEDs, Self-Learning Algorithm |
8. Кепилдик жана колдоо
The Fortin EVO-AUDT2 is covered by a manufacturer's warranty. Please refer to the warranty documentation included with your product or visit the official Fortin website for detailed warranty terms and conditions. For technical support, firmware updates, or additional installation resources, please visit the Fortin website or contact their customer service department. It is recommended to have installation and troubleshooting performed by a certified professional.
Fortin Official Webсайт: https://fortin.ca
