1. Киришүү
This manual provides essential instructions for the safe and efficient operation, maintenance, and troubleshooting of your ECHO ECS300T/S 10-inch (25cm) Sprocket Nose Bar Chainsaw. Please read this manual thoroughly before using the chainsaw and keep it for future reference. Adherence to these instructions will ensure optimal performance and user safety.
2. Коопсуздук нускамалары
Operating a chainsaw can be dangerous if proper safety precautions are not followed. Always prioritize safety to prevent serious injury or death.
- Жеке коргонуу каражаттары (ЖКК): Always wear a safety helmet, eye protection, hearing protection, heavy-duty gloves, chainsaw protective trousers or chaps, and safety boots.
- Иш чөйрөсү: Ensure the work area is clear of bystanders, children, and pets. Maintain a safe distance from other people and objects.
- Ишке чейинки текшерүү: Before each use, inspect the chainsaw for loose parts, damage, or wear. Ensure the chain brake is functional and the chain is properly tensioned and sharp.
- Fuel Handling (for gasoline models): Handle fuel in a well-ventilated area, away from ignition sources. Do not smoke while refueling. Wipe up any spills immediately.
- Артка соккунун алдын алуу: Be aware of the risk of kickback. Avoid cutting with the tip of the guide bar. Maintain a firm grip with both hands.
- Туруктуу фундамент: Always maintain secure footing and balance. Do not overreach.
- Аба ырайы шарттары: Do not operate the chainsaw in adverse weather conditions such as heavy rain, strong winds, or icy conditions.
- чарчоо: Do not operate the chainsaw when tired or under the influence of alcohol or medication.
3. Продукт бүтүп калдыview
The ECHO ECS300T/S is a compact and powerful chainsaw designed for various cutting tasks. Familiarize yourself with its components for safe and effective use.
Үстүбүздөгү чыгым view of the ECHO ECS300T/S chainsaw, featuring a grey and black body with a 10-inch sprocket nose bar and chain. The ECHO logo is visible on the bar and engine casing.
Негизги компоненттер:
- Гид тилкеси: The metal bar that supports and guides the saw chain. This model features a 10-inch (25cm) sprocket nose bar.
- Араа чынжыр: The cutting chain that rotates around the guide bar. This model uses a 91PX specification chain.
- Кыймылдаткычтын корпусу: Contains the engine, fuel tank, and oil tank.
- Алдыңкы туткасы: For gripping the chainsaw with your left hand.
- Арткы туткасы: For gripping the chainsaw with your right hand, incorporating the throttle trigger and safety lock-out.
- чынжыр тормоз: A safety device designed to stop the chain instantly in case of kickback.
- Баштоочу тутка: Моторду кол менен иштетүү үчүн колдонулат.
- Күйүүчү май капкагы: For the gasoline tank.
- Oil Cap: For the chain lubricant oil tank.
4. Орнотуу
4.1 Пакеттен чыгаруу
Carefully remove all components from the packaging. Check for any damage during transit. Ensure all parts listed in the packing list are present.
4.2 Fuel and Oil Mixture
This chainsaw operates on a mixture of gasoline and 2-stroke engine oil. Use high-quality unleaded gasoline and a premium 2-stroke engine oil specifically designed for air-cooled engines. Refer to the engine oil manufacturer's instructions for the correct mixing ratio, typically 50:1 (50 parts gasoline to 1 part oil) or 25:1. Mix fuel in a separate, approved fuel container. Always add oil to gasoline, not the other way around, and shake well before filling the fuel tank.
- Fill the fuel tank with the prepared fuel mixture.
- Fill the chain oil tank with high-quality bar and chain lubricant. Do not use waste oil or motor oil.
4.3 Bar and Chain Installation
- Кыймылдаткыч өчүрүлгөнүн жана чынжыр тормозу бекитилгенин текшериңиз.
- Remove the chain cover nuts and the chain cover.
- Place the guide bar onto the studs, ensuring the chain tension pin engages with the hole in the guide bar.
- Carefully fit the saw chain around the sprocket and into the guide bar groove. Ensure the cutting edges of the chain are facing forward on the top of the guide bar.
- Replace the chain cover and loosely tighten the nuts.
4.4 Чынжырдын чыңалуусун жөндөө
Proper chain tension is crucial for safe and efficient operation. The chain should be snug against the guide bar, but still able to be pulled around by hand with light effort. There should be no sag on the underside of the guide bar.
- With the chain cover nuts slightly loose, use the tensioning screw (usually located on the side of the chainsaw) to adjust the chain tension.
- Lift the tip of the guide bar slightly while tightening the chain cover nuts firmly.
- Check the tension again. The chain should not bind and should move freely.
5. Операция
5.1 Моторду ишке киргизүү
Always start the chainsaw on a firm, flat surface, ensuring the chain brake is engaged.
Муздак баштоо:
- Чынжыр тормозун иштетиңиз.
- Дроссель рычагын ТОЛУК ДРОСЕЛЬ абалына коюңуз.
- Кайтаруу сызыгында күйүүчү май көрүнгүчө, праймер лампочкасын бир нече жолу басыңыз.
- Pull the starter handle firmly and smoothly until the engine fires (usually a few pulls).
- Once the engine fires, immediately push the choke lever to the HALF CHOKE or RUN position.
- Pull the starter handle again until the engine starts and runs.
- Allow the engine to warm up for a few moments, then disengage the chain brake and gently blip the throttle to return to idle.
Жылуу баштоо:
- Чынжыр тормозун иштетиңиз.
- Set the choke lever to the RUN position.
- Мотор ишке киргенче стартердин туткасын тартыңыз.
5.2 Кесүү техникасы
Always use both hands to operate the chainsaw. Maintain a firm grip and stable footing.
- Кыюу: For felling small trees, plan your escape route and ensure no one is in the fall zone. Make a directional notch first, then a felling cut from the opposite side.
- Аяктоо: Remove branches from a felled tree. Work from the base towards the top, supporting the branch if it's under tension.
- Букинг: Cutting a felled tree into sections. Be aware of pinching and rolling logs. Use a sawhorse or support logs to keep the chain off the ground.
5.3 Моторду токтотуу
To stop the engine, simply press the engine stop switch to the OFF position. Engage the chain brake immediately after stopping.
6. Техникалык тейлөө
Үзгүлтүксүз тейлөө чынжырчаңыздын узак мөөнөттүү жана коопсуз иштеши үчүн маанилүү.
6.1 Күнүмдүк текшерүүлөр
- Check chain tension and sharpness.
- Inspect the guide bar for wear or damage.
- Verify chain brake functionality.
- Күйүүчү майдын жана чынжыр майынын деңгээлин текшериңиз.
- Аба чыпкасын тазалаңыз.
6.2 Чынжырды курчутуу
A sharp chain is critical for efficient cutting and safety. Sharpen the chain regularly using a round file of the correct diameter (refer to chain specifications, typically 4.0mm for 91PX chain) and a flat file for depth gauges. Maintain consistent angles and file all cutters evenly.
6.3 Гид тилкесин тейлөө
- Clean the guide bar groove to remove sawdust and debris.
- Бир калыпта эскирүүнү камсыз кылуу үчүн багыттоочу тилкени мезгил-мезгили менен которуңуз.
- Check the sprocket nose for smooth rotation and lubrication.
6.4 Аба чыпкасын тазалоо
Remove the air filter and clean it with warm, soapy water. Rinse thoroughly and allow it to dry completely before reinstallation. Replace if damaged or excessively dirty.
6.5 Шамды тейлөө
Inspect the spark plug periodically. Clean any carbon deposits and adjust the electrode gap if necessary. Replace the spark plug annually or if it shows signs of wear.
6.6 Сактоо
Before long-term storage, drain the fuel tank or run the engine until it runs out of fuel. Clean the chainsaw thoroughly. Store in a dry, secure location away from children and ignition sources.
7. Кыйынчылыктарды
Бул бөлүмдө чынжырлуу араа менен кездешиши мүмкүн болгон кеңири таралган көйгөйлөр каралат.
| Көйгөй | Мүмкүн себеп | Чечим |
|---|---|---|
| Мотор иштебейт | No fuel, incorrect choke setting, fouled spark plug, clogged fuel filter, engaged chain brake. | Check fuel level, adjust choke, clean/replace spark plug, clean/replace fuel filter, disengage chain brake. |
| Чынжырлуу араа начар кесет | Dull chain, incorrect chain tension, worn guide bar, insufficient chain oil. | Sharpen chain, adjust tension, replace guide bar, check oil level and oiler function. |
| Мотор күчү жетпейт | Clogged air filter, incorrect fuel mixture, worn spark plug, carburetor issues. | Clean air filter, use correct fuel mixture, replace spark plug, consult service center for carburetor. |
| Ашыкча термелүү | Loose components, damaged chain or guide bar. | Tighten all fasteners, inspect and replace damaged chain/bar. |
8. Техникалык шарттар
- Бренд: ECHO
- Модел: ECS300T/S
- Продукциянын өлчөмдөрү: 25.7 см (узундугу) x 21.4 см (туурасы) x 21 см (бийиктиги)
- Продукт Салмагы: 3 килограмм
- чынжыр узундугу: 25 см (10 дюйм)
- Guide Bar Type: Sprocket Nose Bar
- Chain Specification: 91PX
- Кубат булагы: Gasoline Engine (based on visual evidence and typical chainsaw design for 91PX chain)
- Amazon.co.jp сайтында биринчи жеткиликтүү датасы: 2024/6/4
9. Кепилдик жана колдоо
Specific warranty details and direct support contact information are not available in the provided product data. For warranty claims, technical support, or service, please refer to the documentation included with your purchase or contact your authorized ECHO dealer or the retailer from whom you purchased the product.
