MAXUS 100 Gram Class M1 Calibration Weight User Manual

Introduction

This manual provides instructions for the proper use and care of your MAXUS 100 Gram Class M1 High Precision Stainless Steel Calibration Weight. This weight is designed to enhance the accuracy of weighing scales in laboratories, educational settings, and industrial applications.

Маанилүү коопсуздук маалыматы

• Handle the calibration weight with care to avoid damage or alteration to its mass.
• Store the weight in a clean, dry, and temperature-stable environment.
• Avoid contact with corrosive substances, which can affect the weight's material and accuracy.
• Use gloves or tweezers when handling to prevent transferring oils or dirt from hands.

Пакеттин мазмуну

• 1 x MAXUS 100 Gram Class M1 Calibration Weight

Продукт бүттүview

The MAXUS 100 Gram Class M1 Calibration Weight is a high-precision instrument crafted from stainless steel, adhering to Class M1 standards. It is specifically designed for accurate measurements and calibrating a wide range of scales.

Өзгөчөлүктөрү:

• Class M1 Precision: Adheres to Class M1 standards for high precision.
• 100 Gram Weight: Specifically crafted for accurate measurements.
• Дат баспас болоттон жасалган курулуш: Жогорку сапаттагы дат баспас болоттон жасалган.
• Ар тараптуу колдонуу: Ideal for calibrating a wide range of scales.
• Оңой иштетүү: Compact design for easy handling and storage, with a smooth surface for effortless cleaning.

An image showing the MAXUS 100 Gram Class M1 Stainless Steel Calibration Weight, a cylindrical object with a smooth, metallic finish.

Жайгашуу

Before use, ensure the calibration weight is clean and free from dust or debris. Handle the weight with gloves or tweezers to prevent transferring oils or dirt from your hands, which can affect its accuracy. Place the weight gently on the scale's weighing pan when ready for calibration.

Иштөө нускамалары

Максаты:

This calibration weight is used to verify and adjust the accuracy of weighing scales.

Процедура:

1. Ensure your weighing scale is placed on a stable, level surface, away from drafts or vibrations.
2. Turn on your scale and allow it to warm up according to its manufacturer's instructions.
3. Perform any necessary initial zeroing or taring of the scale.
4. Carefully place the MAXUS 100 Gram Class M1 Calibration Weight onto the center of the scale's weighing pan.
5. Observe the reading on the scale. If the reading deviates from 100.00 grams, refer to your scale's instruction manual for calibration procedures.
6. Once calibration is complete or verification is done, carefully remove the weight from the scale.

Техникалык тейлөө жана кам көрүү

Тазалоо:

To clean the calibration weight, use a soft, lint-free cloth. For stubborn marks, a mild, non-abrasive cleaning solution can be used, followed by thorough drying. Avoid harsh chemicals that could damage the stainless steel finish or alter the weight.

Сактагыч:

Store the calibration weight in its protective casing (if provided) or a clean, dry, and temperature-stable environment. Protect it from dust, moisture, and physical impact to maintain its precision.

Проблемаларды чечүү

Inaccurate Scale Reading:

• Таразанын тегиз бетинде экенин текшериңиз.
• Check for drafts or vibrations affecting the scale.
• Verify the calibration weight is clean.
• Refer to your scale's manual for specific calibration steps.

Weight Damage:

If the weight is visibly damaged or corroded, its accuracy may be compromised. It should be replaced or professionally re-certified.

Техникалык шарттар

Кепилдик жана колдоо

For warranty information and customer support, please refer to the MAXUS official webсайтка же сатуучуга кайрылыңыз. Кепилдик дооматтар үчүн сатып алуу дүмүрчөгүңүздү сактаңыз.