BITFENIX Fang ARGB Medium Tower Computer Case Black

1. Киришүү

This manual provides detailed instructions for the installation, operation, and maintenance of your BITFENIX Fang ARGB Medium Tower Computer Case. Please read this manual thoroughly before beginning assembly to ensure proper setup and optimal performance. The Fang ARGB case features an elegant design with a mesh front panel, a tempered glass side window, and four pre-installed Addressable RGB (ARGB) fans, offering compatibility with motherboard RGB synchronization for a personalized lighting experience.

2. Негизги өзгөчөлүктөрү

• Elegant дизайн: Mesh front panel and tempered glass side window for aesthetics and component visibility.
• Алдын ала орнотулган ARGB желдеткичтери: Four 120mm ARGB fans included for enhanced cooling and customizable lighting.
• Motherboard шайкештиги: ATX, Micro-ATX жана Mini-ITX энелик платаларын колдойт.
• Ample Component Support: Accommodates graphics cards up to 360mm and CPU coolers up to 163mm.
• Натыйжалуу муздатуу: Designed for excellent airflow with support for multiple fan and radiator configurations.
• Convenient I/O: Top-mounted panel with 2x USB 3.0, 1x USB 2.0, audio ports, and LED/Reset button.
• Кабелдик башкаруу: Up to 26mm (1.0 inch) of space behind the motherboard tray for tidy cable routing.
• Сактоо параметрлери: Multiple drive bays for 3.5" and 2.5" drives.

3. Орнотуу нускамалары

Follow these steps to assemble your computer system within the BITFENIX Fang ARGB case.

3.1. Ишти даярдаңыз

1. Кутучаны этияттык менен ачып, бардык таңгактоочу материалдарды алып салыңыз.
2. Корпусту туруктуу, тегиз бетке коюңуз.
3. Remove the tempered glass side panel by unscrewing the thumb screws at the rear of the case and gently pulling the panel away.
4. Remove the solid side panel (opposite the tempered glass) by unscrewing the thumb screws and sliding the panel backward.

3.2. Install the Motherboard

The case supports Mini-ITX, Micro-ATX, and ATX motherboards. Ensure standoffs are correctly aligned for your motherboard size.

Image: Illustrates motherboard compatibility (ATX, Micro-ATX, Mini-ITX) and maximum VGA length support of 360mm (14.1 inches).

1. Install the I/O shield (if not pre-attached to your motherboard) into the rear I/O opening of the case.
2. Align your motherboard with the pre-installed standoffs. If your motherboard requires different standoff positions, adjust them accordingly.
3. Берилген бурамалар менен энелик тактаны бекитиңиз.

3.3. Install the Power Supply Unit (PSU)

Кубат булагы корпустун түбүнө орнотулат.

Image: Shows the space-efficient interior with locations for 3.5" and 2.5" drives, and the power supply unit (ATX & Standard / up to 200mm).

1. Кубат блогун корпустун арткы астыңкы жагындагы атайын бөлүмгө жылдырыңыз.
2. Кубат булагы менен кошо берилген бурамалар менен кубат булагын корпуска бекитиңиз.

3.4. Install Storage Drives

The case supports 1x 3.5" drive or 2x 2.5" drives in the main compartment, and 2x 2.5" drives behind the motherboard tray.

1. Mount your 3.5" or 2.5" drives into the appropriate drive bays.
2. Secure the drives with screws.

3.5. Install Graphics Card and Other Expansion Cards

Иш 360 мм узундуктагы графикалык карталарды колдойт.

1. Керектүү PCIe уячасынын капкактарын корпустун арткы бөлүгүнөн алып салыңыз.
2. Графикалык картаңызды же башка кеңейтүү карталарын энелик платанын PCIe уячаларына салыңыз.
3. Карталарды бурамалар менен бекитиңиз.

3.6. Connect Front I/O Cables

Connect the front panel cables to their corresponding headers on your motherboard. Refer to your motherboard manual for exact header locations.

Image: Details the top I/O panel with Power Button, LED/Reset USB 2.0 Button, and 2x USB 3.0 ports. Also shows removable dust filters on top and bottom.

• Connect the USB 3.0 cables to the motherboard's USB 3.0 header.
• Connect the USB 2.0 cable to the motherboard's USB 2.0 header.
• HD аудио кабелин энелик платанын аудио уячасына туташтырыңыз.
• Connect the Power SW, Reset SW, HDD LED, and Power LED cables to the front panel headers.

3.7. Кабелдик башкаруу

Utilize the 26mm (1.0 inch) cable management space behind the motherboard tray to route and secure cables for a clean build and improved airflow.

Image: Displays internal dimensions including maximum CPU cooler height of 163mm (6.4 inches), cable management space of 26mm (1.0 inch), and maximum graphics card support of 360mm (14.1 inches).

1. Route power cables from the PSU through the cutouts to their respective components.
2. Use zip ties or Velcro straps (not included) to bundle and secure cables behind the motherboard tray.

3.8. Ишти жабуу

1. Reattach the solid side panel and secure it with thumb screws.
2. Reattach the tempered glass side panel and secure it with thumb screws.

4. Иштөө нускамалары

4.1. Күйгүзүү/өчүрүү

Системаны күйгүзүү же өчүрүү үчүн жогорку киргизүү/чыгаруу панелинде жайгашкан кубат баскычын басыңыз.

4.2. ARGB жарыкты башкаруу

The pre-installed ARGB fans can be controlled via your motherboard's ARGB software (if supported) or through the dedicated LED/Reset button on the top I/O panel for pre-set lighting modes.

5. Техникалык тейлөө

5.1. Чаң чыпкасын тазалоо

The BITFENIX Fang ARGB case features removable dust filters on the top and bottom for easy cleaning. Regular cleaning helps maintain optimal airflow and prevents dust buildup inside your system.

Image: Shows the removable dust filters located on the top and bottom of the case for easy access and cleaning.

1. Gently slide out the dust filters from their respective slots.
2. Чыпкаларды кысылган аба менен же суу менен чайкап тазалаңыз. Кайра орнотуудан мурун алардын толугу менен кургаганын текшериңиз.
3. Slide the clean filters back into place.

6. Техникалык шарттар

Image: Detailed dimensions of the BITFENIX Fang ARGB case, showing length, height, and width.

7. Кыйынчылыктарды

If you encounter issues during or after assembly, consider the following common troubleshooting steps:

• Система күйбөй жатат: Double-check all power connections, especially the 24-pin ATX and 8-pin CPU power cables to the motherboard, and the front panel power switch connection.
• Дисплей жок: Ensure your graphics card is properly seated in its PCIe slot and connected to the power supply. Verify your monitor cable is connected to the graphics card, not the motherboard's integrated graphics port.
• Fan/ARGB Issues: Confirm all fan and ARGB cables are correctly connected to the motherboard headers or the ARGB controller. Refer to your motherboard manual for ARGB header locations and software control.
• Ашыкча ысып кетүү: Ensure all fans are spinning correctly and oriented for proper airflow (intake/exhaust). Clean dust filters regularly. Verify CPU cooler and GPU cooler installations.

8. Кепилдик жана колдоо

For warranty information, technical support, or further assistance, please refer to the official BITFENIX webсайтка же түздөн-түз кардарларды тейлөөгө кайрылыңыз. Кепилдик дооматтар үчүн сатып алганыңыздын далилин сактаңыз.

Official BITFENIX Webсайт: www.bitfenix.com