M5Stack C124

M5Stack AtomS3 Lite ESP32-S3 IoT иштеп чыгуу комплектинин колдонуучу колдонмосу

Model: C124

1. Бүттүview

The M5Stack AtomS3 Lite is an ultra-compact programmable controller designed for Internet of Things (IoT) development. It integrates the powerful ESP32-S3FN8 as its main control unit, offering Wi-Fi connectivity and a range of built-in features for various embedded smart device applications.

Негизги өзгөчөлүктөрү:

  • Ультра компакт дизайн: Measuring only 24x24x9.5mm (0.97x0.97x0.37 inches), ideal for space-constrained projects.
  • ESP32-S3FN8 Main Control: Features 8MB SPI flash memory for robust application development.
  • Интегралдык байланыш: Built-in 3D Wi-Fi antenna for reliable wireless communication.
  • Энергияны башкаруу: Efficient 5V to 3.3V power circuit.
  • User Feedback & Control: Includes an infrared LED, RGB LED status indicators, and an integrated button.
  • Кеңейтүүчү интерфейстер: GROVE/HY2.0-4P interfaces and 6 GPIO headers for easy expansion with external modules.
  • USB-C интерфейси: On-board Type-C port for convenient reprogramming, downloading, and serial port communication.
  • Коопсуз орнотуу: An M2 screw hole is provided on the back for stable installation.

Кутуда эмне бар:

  • 1 x M5Stack AtomS3 Lite ESP32 IoT Development Kit
M5Stack AtomS3 Lite top view

1-сүрөт: Жогорку view of the M5Stack AtomS3 Lite.

M5Stack AtomS3 Lite in retail packaging

Figure 2: M5Stack AtomS3 Lite in its retail packaging.

M5Stack AtomS3 Lite size comparison with a quarter

Figure 3: Size comparison of the AtomS3 Lite with a US quarter.

2. Орнотуу

2.1 Баштапкы туташуу

Connect the M5Stack AtomS3 Lite to your computer using a USB Type-C cable. The device will typically power on automatically. The on-board RGB LED may illuminate to indicate power status.

2.2 Драйверди орнотуу

Depending on your operating system, you may need to install a USB-to-serial driver for the device to be recognized by your computer. Refer to the official M5Stack documentation for specific driver requirements and installation guides for your OS.

2.3 Entering Download Mode

To upload new firmware or programs to the AtomS3 Lite, you may need to place it into download mode. To do this, press and hold the RESET button on the AtomS3 Lite before connecting it to power (or before turning it on if already connected). Release the button after the device powers on. This procedure allows the device to enter the bootloader for programming.

M5Stack AtomS3 Lite side view showing reset button

4-сүрөт: Каптал view highlighting the reset button.

M5Stack AtomS3 Lite side view USB-C порту көрсөтүлүүдө

5-сүрөт: Каптал view highlighting the USB-C port.

3. Иштөө нускамалары

3.1 Күйгүзүү/өчүрүү

The AtomS3 Lite powers on automatically when connected to a 5V power source via its USB Type-C port. There is no dedicated power switch. To power off, disconnect the power source.

3.2 Programming and Development

The AtomS3 Lite is designed for custom programming using various development environments compatible with ESP32-S3, such as Arduino IDE, PlatformIO, or ESP-IDF. The USB Type-C interface facilitates code uploading and serial debugging.

3.3 Using Integrated Peripherals

  • RGB LED: The on-board RGB LED can be controlled programmatically to indicate status or provide visual feedback.
  • Баскыч: The integrated button can be used as a user input for various functions within your application.
  • Инфракызыл LED: The infrared LED allows for IR transmission, useful for remote control applications.
  • GROVE/HY2.0-4P Interfaces: These ports provide convenient connections for M5Stack's extensive range of Grove modules and other compatible sensors/actuators.
  • GPIO Headers: The 6 GPIO headers on the bottom of the device offer direct access to additional ESP32-S3 pins for advanced customization and expansion.
M5Stack AtomS3 Lite detailed pinout

6-сүрөт: Детальдуу view of AtomS3 Lite pinout and interfaces.

M5Stack AtomS3 Lite bottom view with GPIO headers

7-сүрөт: Төмөнкү view showing GPIO headers.

3.4 Testing RGB LED and Button Functionality

The following video demonstrates how to test the RGB LED and button on an M5Stack device, which is applicable to the AtomS3 Lite's integrated components.

Video 1: Demonstration of RGB LED and button functionality test on an M5Stack device.

4. Техникалык тейлөө

To ensure the longevity and proper functioning of your M5Stack AtomS3 Lite, observe the following maintenance guidelines:

  • Экологиялык шарттар: Аппаратты экстремалдык температурага, жогорку нымдуулукка же тике күн нуруна тийгизүүдөн сактаңыз.
  • Суюктук менен байланыш: Keep the device away from water and other liquids to prevent short circuits and damage.
  • Физикалык коргоо: Handle the device with care to prevent physical impact or dropping.
  • Тазалоо: Түзмөктү тазалоо үчүн кургак, жумшак чүпүрөктү колдонуңуз. Катуу химиялык заттарды же абразивдүү материалдарды колдонбоңуз.
  • Сактагыч: When not in use, store the device in a dry, dust-free environment.
  • Кеңейтүү: When using the M2 screw hole for fixing, ensure screws are not overtightened to prevent damage to the PCB.

5. Кыйынчылыктарды

If you encounter issues with your M5Stack AtomS3 Lite, consider the following troubleshooting steps:

  • Түзмөк жооп бербейт: Ensure the device is properly connected to a stable 5V power source via the USB Type-C cable.
  • Программалоо маселелери: If you are unable to upload code, verify that the correct drivers are installed and that the device is in download mode (refer to Section 2.3). Check your development environment settings for the correct board and port selection.
  • Туташуу көйгөйлөрү: For Wi-Fi or Bluetooth issues, ensure your code correctly initializes and configures the wireless modules. Check for environmental interference.
  • Күтүлбөгөн жүрүм-турум: Review your code for logical errors. If using external modules, ensure they are correctly wired and powered.
  • Физикалык зыян: Inspect the device for any visible signs of damage. If damage is present, discontinue use.

6. Техникалык шарттар

ӨзгөчөлүкДеталь
Модель номериC124
Негизги башкарууESP32-S3FN8
Flash Memory8 MB SPI Flash
RAM512 КБ SRAM
Зымсыз байланышWi-Fi (802.11bgn), Bluetooth
Операциялык системанын шайкештигиFreeRTOS, Ubuntu, Linux
Өлчөмдөрү (LxWxH)0.95 x 0.95 x 0.37 дюйм (24 x 24 x 9.5 мм)
Салмагы0.423 унция
InterfacesUSB Type-C, GROVE/HY2.0-4P, 6x GPIO Headers
Комплекстүү перифериялык түзүлүштөрInfrared LED, RGB LED, Button

7. Кепилдик жана колдоо

7.1 Кепилдик маалыматы

Specific warranty details for the M5Stack AtomS3 Lite are typically provided at the point of purchase or on the official M5Stack webсайт. Сураныч, кепилдик дооматтар үчүн сатып алуу далилиңизди сактап коюңуз.

7.2 Техникалык колдоо

For technical assistance, detailed documentation, and community forums, please visit the official M5Stack website. You can find resources for programming, project examples, and further troubleshooting guides.

Official M5Stack Store: Visit M5Stack Store on Amazon

Тектеш документтер - C124

Preview M5Stack AtomS3-Lite ESP32-S3 иштеп чыгуу тактасы
M5Stack AtomS3-Lite, IoT жана микроконтроллер долбоорлору үчүн Wi-Fi, интеграцияланган антенна жана ар тараптуу интерфейстерди камтыган компакт ESP32-S3 иштеп чыгуу тактасын изилдеңиз. Arduino IDE жана UiFlow2 менен анын спецификациялары, өзгөчөлүктөрү жана иштеп чыгуу жолдору жөнүндө билип алыңыз.
Preview M5STACK AtomS3 Lite User Manual: ESP32-S3 Development Board Guide
Comprehensive user manual for the M5STACK AtomS3 Lite development board featuring the ESP32-S3. Covers hardware, features, pin descriptions, electrical specifications, and quick start guides for Arduino, Bluetooth, and Wi-Fi.
Preview M5STACK STAMPS3 маалымат жадыбалы жана техникалык мүнөздөмөлөрү
M5STACK ST менен таанышыңызAMPWi-Fi жана Bluetooth 5 (LE) менен ESP32-S3 чипти камтыган S3 иштеп чыгуу тактасы. Бул маалымат баракчасы анын аппараттык курамын, пин сүрөттөмөлөрүн, функционалдык мүмкүнчүлүктөрүн жана IoT долбоорлору үчүн электрдик мүнөздөмөлөрдү камтыйт.
Preview M5STACK Stamp-S3Bat колдонуучусунун колдонмосу жана тез баштоо боюнча колдонмо
M5STACK көчөсү үчүн кеңири колдонуучу колдонмосу жана тез баштоо боюнча колдонмоamp-S3Bat, ESP32-S3 негизиндеги камтылган өзөктүк модуль. Ал модулдун функцияларын, мүнөздөмөлөрүн, Arduino IDE, Wi-Fi сканерлөө, BLE сканерлөө үчүн орнотуу процедураларын кеңири баяндайт жана FCC шайкештик жөнүндө маалыматты камтыйт. Бул колдонмо иштеп чыгуучуларга IoT тиркемелерин тез түзүүгө жардам берет.
Preview M5Stack Atom-Lite: Compact ESP32 иштеп чыгуу кеңеши | Бүттүview & Specs
M5Stack Atom-Lite (SKU: C008), камтылган системалар жана IoT үчүн компакт ESP32-PICO-D4 иштеп чыгуу тактасын табыңыз. Анын өзгөчөлүктөрү, спецификациялары, GPIO, программалык камсыздоонун шайкештиги (Arduino, UiFlow) жана тиркемелер жөнүндө билип алыңыз.
Preview M5Stack StickS3 колдонуучусунун колдонмосу жана мүнөздөмөлөрү
Wi-Fi, Bluetooth, LCD, IMU жана аудио функциялары бар компакттуу ESP32-S3 программалануучу контроллери M5Stack StickS3 колдонуучусунун колдонмосу жана техникалык мүнөздөмөлөрү. Орнотуу боюнча колдонмону, Wi-Fi/BLE сканерлөөнү камтыйт.ampдокументтер жана FCC шайкештик жөнүндө маалымат.