JBL Stage 2 200P менен иштеген сабвуфердин колдонуу боюнча колдонмосу

1. Киришүү

JBL Stage 2 200P is a 300W powered subwoofer designed to enhance the low-frequency performance of your home audio system. Engineered at JBL's Acoustic Engineering Center of Excellence in Northridge, California, this subwoofer is part of the Stage series, delivering deep and powerful bass. It features a front-firing 10-inch (250mm) Polycellulose low-frequency woofer and dual rear-firing tuned ports for optimal bass response. A comprehensive set of controls allows for seamless integration into various audio setups.

2. Негизги өзгөчөлүктөрү

• 10-inch (250mm) Polycellulose Ribbed Cone Low-Frequency Woofer: Delivers robust and accurate bass.
• 150W RMS (300W динамикалык) Ampөмүр берүүчү: камсыз кылат ample power for dynamic low-frequency reproduction.
• Dual Rear-Firing Tuned Ports: Enhances bass output and extension.
• Crossover, Level, and Phase Control: Allows for precise adjustment and integration with main speakers.

3. Пакеттин мазмуну

Кутудан чыгарылганда бардык буюмдар бар экенин текшериңиз:

• JBL Stage 2 200P Powered Subwoofer
• Электр кабели
• Колдонуучунун Колдонмосу (бул документ)

4. Орнотуу

4.1. Жайгаштыруу

The placement of your subwoofer significantly impacts its performance. Experiment with different locations to find the best bass response in your listening area. Generally, placing the subwoofer in a corner can enhance bass output, while placing it along a wall can provide a more balanced sound. Avoid placing it directly against a wall or in a cabinet without proper ventilation.

Сүрөт 1: Алдыңкы view JBL Stage 2 200P Subwoofer. This image shows the subwoofer's front grille, which can be removed to reveal the woofer cone.

Сүрөт 2: Алдыңкы view JBL Stage 2 200P Subwoofer with the grille removed, highlighting the 10-inch Polycellulose ribbed cone woofer.

4.2. Байланыштар

Сабвуферди аудио кабыл алгычыңызга туташтырыңыз же amplifier using an LFE (Low-Frequency Effects) output or stereo RCA outputs. For optimal performance, use a dedicated subwoofer output from your receiver.

1. LFE киргизүү: If your receiver has an LFE output, connect a single RCA cable from the receiver's LFE output to the subwoofer's LFE input.
2. Сап деңгээлиндеги киргизүүлөр: If your receiver does not have an LFE output, connect RCA cables from the receiver's stereo pre-out (left and right) to the subwoofer's Line-Level inputs.

3-сүрөт: Арткы view JBL Stage 2 200P Subwoofer, displaying the control panel, input/output connections, and dual rear-firing tuned ports.

4-сүрөт: Детальдуу view of the rear control panel, illustrating the Crossover, Volume, Phase, and Power Mode settings for system integration.

4.3. Power Connection

Once audio connections are made, connect the supplied power cord to the subwoofer's power input and then to a suitable AC wall outlet. The subwoofer features a power mode switch (On/Auto/Normal/Reverse) for convenient operation.

5. Операция

5.1. Controls Overview

The rear panel of the JBL Stage 2 200P subwoofer provides several controls for fine-tuning its performance:

• Volume (Level) Control: Сабвуфердин жалпы чыгаруу деңгээлин тууралайт. Төмөн жөндөөдөн баштап, басс негизги динамиктериңизге кемчиликсиз аралашканга чейин акырындык менен көбөйтүңүз.
• Crossover Control: Sets the upper frequency limit for the subwoofer. Frequencies above this setting will be sent to your main speakers. Adjust this to match the low-frequency capabilities of your main speakers. A common starting point is 80 Hz.
• Фазаны башкаруу (0°/180°): Adjusts the phase of the subwoofer's output relative to your main speakers. Experiment with both settings to find the one that provides the most impactful and coherent bass.
• Power Mode Switch (On/Auto/Normal/Reverse):
  • Күйүк: The subwoofer remains continuously on.
  • Авто: Сабвуфер аудио сигнал аныкталганда автоматтык түрдө күйөт жана бир аз убакыт иштебей тургандан кийин күтүү режимине өтөт.
  • Normal/Reverse: These settings might refer to specific phase adjustments or power-saving modes. Refer to the detailed manual for specific model functionality.

5.2. Initial Adjustment

1. коюңуз Көлөм control to its minimum position.
2. коюңуз Кроссовер control to approximately 80 Hz, or as recommended by your main speaker manufacturer.
3. коюңуз Фаза switch to 0°.
4. коюңуз Кубат режими to "Auto" for convenience.
5. Play some audio with significant bass content.
6. Акырындык менен көбөйтүү Көлөм control until the bass output is balanced with your main speakers.
7. Эксперимент менен Фаза switch (0° vs. 180°) to determine which setting provides the most natural and impactful bass in your listening position.
8. Further fine-tune the Кроссовер жана Көлөм controls to achieve optimal integration and desired bass response.

6. Техникалык тейлөө

• Тазалоо: Use a soft, dry cloth to clean the subwoofer cabinet. Avoid using abrasive cleaners, waxes, or solvents.
• Вентиляция: Ensure adequate ventilation around the subwoofer to prevent overheating. Do not block the rear ports or place the unit in an enclosed space without airflow.
• Колдонуу: When moving the subwoofer, lift it carefully from the base. Avoid dropping or subjecting it to strong impacts.

7. Кыйынчылыктарды

8. Техникалык шарттар

5-сүрөт: Каптал view of the subwoofer illustrating its physical dimensions.

9. Кепилдик жана колдоо

JBL Stage 2 200P Powered Subwoofer comes with a limited warranty. For detailed information regarding warranty terms, conditions, and duration, please refer to the warranty card included in your product packaging or visit the official JBL webсайт. Техникалык колдоо, мүчүлүштүктөрдү оңдоо боюнча жардам же тейлөө боюнча суроолор үчүн JBL кардарларды колдоо кызматына алардын расмий каналдары аркылуу кайрылыңыз.

Көбүрөөк маалымат алуу үчүн расмий JBL дүкөнүнө кириңиз: Amazonдагы JBL дүкөнү