Amana айырмачылыктары DHP153A35AA таңгакталган терминалдык жылуулук насосу (PTHP) блогунун колдонуу боюнча колдонмосу

1. Киришүү

This manual provides essential information for the safe and efficient operation of your Amana Distinctions Model DHP153A35AA Packaged Terminal Heat Pump (PTHP) unit. This unit is designed to provide both cooling (14,700 BTU) and heating (13,500 BTU with 3.5 kW Electric Heat Kit) for your space. Please read all instructions carefully before installation and use.

2. Орнотуу

2.1 Физикалык өлчөмдөр

The Amana Distinctions DHP153A35AA unit measures approximately 42 inches wide, 21 inches deep, and 16 inches tall. Ensure adequate space is available for proper installation and airflow around the unit.

2.2 Электрдик талаптар

This unit requires a 200-240 volt electrical supply. It is crucial to verify that your electrical outlet matches the unit's plug configuration. If the appropriate outlet is not available, professional electrical installation is required to ensure safety and proper function.

Сүрөт 1: Алдыңкы view of the Amana Distinctions DHP153A35AA PTHP unit.

Figure 2: Power plug for the Amana Distinctions PTHP unit, indicating 200-240V requirement.

2.3 Орнотуу

Install the unit into a properly sized and secured wall sleeve. Ensure the area around the unit is clear of obstructions to allow for optimal airflow and performance. Do not block the air intake or exhaust vents.

3. Иштөө нускамалары

The control panel for the Amana Distinctions PTHP unit is conveniently located on the top right side, beneath a protective cover. Lift the cover to access the controls.

3.1 Башкаруу панелинин үстүнөview

• Жылытуу баскычы: Жылытуу функциясын иштетет.
• Муздатуу баскычы: Activates the cooling function.
• Өчүк баскычы: Агрегатты өчүрөт.
• Температураны жөндөө баскычтары (өйдө/ылдый): Керектүү температура жөндөөсүн тууралайт.
• Желдетүүчү ылдамдык баскычы: Cycles through High, Low, and Auto fan speeds.
• Constant Fan Button: Engages the fan to run continuously, circulating air even when heating or cooling is not active.

3.2 Температураны жана желдеткичтин ылдамдыгын орнотуу

1. басыңыз Баракелде or Жылуулук каалаган режимди тандоо үчүн баскычты басыңыз.
2. колдонуу Температураны жөндөө buttons (up/down arrows) to set your preferred temperature. The display will show the set temperature.
3. басыңыз Fan Speed button to cycle through High, Low, or Auto settings. For continuous air circulation, press the Туруктуу күйөрман баскычы.
4. To turn the unit off, press the Өчүк баскычы.

4. Техникалык тейлөө

Regular maintenance ensures optimal performance and longevity of your PTHP unit.

4.1 Фильтрди тазалоо

The unit is equipped with two air filters located behind the front grille. It is recommended to clean these filters regularly, especially during periods of heavy use, to maintain air quality and unit efficiency. To access the filters, gently open the front grille. Remove the filters, rinse them with water, and allow them to dry completely before reinserting. Do not operate the unit without filters.

4.2 Жалпы тазалоо

Агрегаттын сыртын жумшак менен сүртүңүз, гamp кездеме. Финишке зыян келтирүүчү катаал химиялык заттарды же абразивдүү тазалагычтарды колдонуудан алыс болуңуз.

5. Кыйынчылыктарды

If your Amana Distinctions PTHP unit is not functioning as expected, refer to the following common issues and solutions:

• Түзмөк күйбөйт: Check if the unit is properly plugged into a 200-240V outlet. Verify that the circuit breaker has not tripped.
• Түзмөк натыйжалуу муздатпайт/жылытпайт: Ensure the correct mode (Cool/Heat) is selected and the temperature setting is appropriate. Check if the air filters are clean and not obstructed. Verify that the fan speed is set correctly.
• адаттан тыш үндөр: Minor operational noises are normal. If you hear loud or unusual sounds, ensure the unit is securely installed and there are no loose parts. Clean the filters as dust buildup can sometimes cause increased noise.

For persistent issues or complex repairs, contact a qualified HVAC service technician. Do not attempt to repair the internal components yourself.

6. Техникалык шарттар

7. Кепилдик жана колдоо

Amana Distinctions PTHP units undergo rigorous quality control, including 100% run testing and leak checks during manufacturing and prior to shipment. For specific warranty terms and conditions, please refer to the documentation provided with your purchase or contact Goodman customer support directly. Keep your proof of purchase for warranty claims.