Walfront Electroplated Silver Zinc Alloy Chopstick and Cutlery Holders

Introduction

This manual provides instructions for the proper use and maintenance of your Walfront Electroplated Silver Zinc Alloy Chopstick and Cutlery Holders. Designed for hygiene and convenience, these holders keep your dining utensils elevated from the table surface. Please read this manual carefully before use.

Продукт өзгөчөлүктөрү

• Гигиеналык дизайн: Elevates chopsticks and other tableware from the table surface, preventing direct contact with potential contaminants.
• Туруктуу позиция: Unique design securely holds cutlery in place, preventing rolling during meals.
• Заманбап эстетика: Slim, lightweight, and portable design with an electroplated silver finish.
• Тазалоо оңой: Simple to clean with water and mild detergent.
• Ар тараптуу колдонуу: Suitable for chopsticks, spoons, forks, and other small cutlery items.
• Туруктуу курулуш: Manufactured from galvanized zinc alloy with polishing and electroplating technologies for a stable, scratch-resistant finish.

Image: The four Walfront Electroplated Silver Zinc Alloy Chopstick and Cutlery Holders.

Жайгашуу

1. Carefully unpack the four Walfront Chopstick and Cutlery Holders from their packaging.
2. Place the holders on your dining table or serving surface where you intend to use them. Ensure they are on a stable, flat surface.

Иштөө нускамалары

1. After setting up the holders, place your chopsticks, spoons, forks, or other small cutlery items onto the designated resting area of each holder.
2. Ensure the cutlery is balanced and stable on the holder to prevent it from rolling off or touching the table surface.

Image: Chopstick holders in use on a dining table.

Техникалык тейлөө

• Тазалоо: Wash the cutlery holders by hand with warm water and a mild dish detergent.
• Чайкоо: Бардык самын калдыктарын алып салуу үчүн, агын суу астында жакшылап чайкаңыз.
• Кургатуу: Dry immediately with a soft cloth to prevent water spots and maintain the electroplated finish.
• Качуу: Do not use abrasive cleaners, harsh chemicals, or scouring pads, as these can damage the surface finish.

Проблемаларды чечүү

The Walfront Chopstick and Cutlery Holders are designed for simple and reliable use. If you encounter any issues, consider the following:

• Cutlery Rolling Off: Ensure the cutlery is properly centered and balanced on the holder's resting area. Adjust the position as needed.
• Беттик туруктуулугу: Verify that the surface where the holders are placed is flat and stable to prevent them from tipping.

Техникалык шарттар

Кепилдик жана колдоо

For warranty information, product support, or any inquiries not covered in this manual, please contact the seller or the manufacturer directly. Retain your proof of purchase for any warranty claims.