Victrola Eastwood LP Bluetooth Record Player

Introduction

The Victrola Eastwood LP is a full-size, 3-speed belt-driven record player designed for optimal vinyl playback and versatile audio connectivity. It features an Audio-Technica AT-3600L moving magnet cartridge for superior sound quality, an anti-skip speaker system, and Bluetooth capabilities for both input and output. This manual provides essential information for the proper setup, operation, and maintenance of your record player.

Image: The Victrola Eastwood LP Record Player, showcasing анын конструкциясы жана компоненттери.

Жайгашуу

1. Пакеттен чыгаруу жана жайгаштыруу

• Бардык компоненттерди таңгактан кылдаттык менен алып салыңыз.
• Place the record player on a stable, level surface away from direct sunlight, heat sources, or excessive vibration.

2. Чаң капкагын орнотуу

• Attach the removable dust cover to the hinges at the back of the unit.
• Ensure it opens and closes smoothly to protect the platter and tonearm from dust.

Image: Detail of the Audio-Technica cartridge and the removable dust cover.

3. Platter and Slipmat

• Place the 12-inch platter onto the turntable spindle.
• Position the felt slipmat on top of the platter.

Image: The 12-inch platter with felt slipmat in place.

4. Тонерди орнотуу

• Remove the clear plastic stylus protector from the Audio-Technica AT-3600L cartridge.
• Ensure the tonearm is unlocked from its rest.

5. Power Connection

• Connect the power adapter to the DC input on the back of the record player.
• Адаптерди розеткага сайыңыз.

Иштөө нускамалары

1. Күйгүзүү/өчүрүү жана режимди тандоо

• To power on, press and hold the control knob on the front of the unit. The LED ring around the knob will illuminate.
• To switch between modes (Vinyl, Vinyl Stream, Bluetooth Input), double-press the control knob. The unit will announce the current mode.
• To power off, press and hold the control knob again.

Image: The illuminated control knob for power and mode selection.

2. Жазууну ойнотуу

1. Ensure the unit is in 'Vinyl' mode.
2. Select the appropriate speed (33 1/3, 45, or 78 RPM) using the speed selector switch. A 45 RPM adapter is included for records with larger center holes.
3. Пластинкаңызды табакка салыңыз.
4. Кью рычагын колдонуп, тонер рычагын көтөрүңүз.
5. Manually position the tonearm over the desired track on the record.
6. Gently lower the tonearm using the cueing lever. The record will begin to play.
7. When the record finishes, lift the tonearm using the cueing lever and return it to its rest.

Image: The 3-speed turntable in operation.

3. Bluetooth Input (Streaming from a Device)

1. Double-press the control knob until the unit announces 'Bluetooth'. The LED ring will flash blue.
2. On your smartphone or tablet, enable Bluetooth and search for 'Victrola Eastwood LP'.
3. Select the device to pair. Once paired, the LED ring will turn solid blue.
4. You can now stream audio from your device through the record player's speakers.

4. Vinyl Stream Bluetooth Output (Streaming to External Speaker)

1. Double-press the control knob until the unit announces 'Vinyl Stream'. The LED ring will flash white.
2. Тышкы Bluetooth динамигиңиз же кулакчындарыңыз жупташтыруу режиминде экенин текшериңиз.
3. The record player will automatically search for and connect to the nearest available Bluetooth audio device. Once connected, the LED ring will turn solid white.
4. Play a record, and the audio will be streamed to your external Bluetooth device.

Image: Illustration of the Vinyl Stream Bluetooth output feature.

5. RCA чыгаруу

• Connect an RCA cable (included) from the RCA output ports on the back of the record player to the audio input of an external ampкөтөргүч же кубаттуу динамиктер.
• Adjust the volume on your external audio system.

6. Гарнитураны чыгаруу

• Plug 3.5mm headphones into the headphone jack on the unit for private listening.

Техникалык тейлөө

1. Агрегатты тазалоо

• Wipe the exterior of the record player with a soft, dry cloth.
• Абразивдүү тазалагычтарды же эриткичтерди колдонуудан алыс болуңуз.

2. Тазалоо жазуулары

• Use a dedicated record brush to gently remove dust and debris from your vinyl records before each play.

3. Стилуска кам көрүү

• Periodically inspect the stylus for dirt or damage.
• Clean the stylus gently with a soft brush designed for stylus cleaning, moving from back to front.

4. Чаңдын капкагы

• Keep the dust cover closed when the record player is not in use to prevent dust accumulation.

Проблемаларды чечүү

Күч жок

• Кубат адаптери түзмөккө да, иштеп жаткан розеткага да бекем туташтырылганын текшериңиз.
• Verify the control knob has been pressed and held to power on the unit.

Үн жок

• Check that the unit is in the correct mode (Vinyl, Bluetooth, or Vinyl Stream).
• If using RCA output, ensure external speakers/amplifier are powered on and volume is adjusted.
• If using Bluetooth output, confirm successful pairing with the external device and its volume.
• Ensure the stylus protector has been removed and the tonearm is properly lowered onto the record.

Record Skipping

• Ensure the record player is on a stable, level surface.
• Clean the record thoroughly to remove any dust or debris.
• Inspect the stylus for damage or dirt.

Image: The anti-skip floating speaker system designed to reduce vibrations.

Bluetooth жупташуу маселелери

• Ensure the record player is in the correct Bluetooth mode (Input or Output).
• Move the record player closer to the Bluetooth device.
• Turn off and on Bluetooth on both devices and attempt to re-pair.

Техникалык шарттар

Кепилдик жана колдоо

For warranty information and technical support, please refer to the warranty card included with your product or visit the official Victrola webсайт. Сатып алуу квитанциясын кепилдик дооматтары үчүн сатып алуунун далили катары сактаңыз.