Tong-Sheng TSDZ8 Mid Motor User Instruction Manual

1. Киришүү

This manual provides essential information for the safe and efficient installation, operation, and maintenance of your Varstrom Tong-Sheng TSDZ8 48V 750W Mid Drive Kit with Dz40 Display. Please read this manual thoroughly before attempting any installation or operation to ensure proper function and to prevent damage or injury.

2. Коопсуздук боюнча көрсөтмөлөр

• Always wear appropriate safety gear, including a helmet, when riding an electric bicycle.
• Ensure all connections are secure and waterproof before riding, especially after installation.
• Do not attempt to modify the motor or display system, as this may void the warranty and create safety hazards.
• Regularly inspect your bicycle and the mid-drive kit for any signs of wear, damage, or loose components.
• Be aware of local regulations regarding electric bicycle speed and power limits.

3. Пакеттин мазмуну

Upon opening your Varstrom TSDZ8 Mid Drive Kit, verify that all components listed below and shown in the accompanying image are present and undamaged.

Image: A visual representation of the TSDZ8 48V 750W mid-drive motor kit components, including the motor, Dz40 display, brake levers, thumb throttle, 1T4 cable, speed sensor, installation screws, wrench, and cable ties.

• TSDZ8 48V 750W Mid Mount Motor
• Dz40 Display
• Thumb Throttle
• Ылдамдык сенсору
• 1T4 кабели
• Screws & Washers (for installation)
• ачкыч
• Мотор узартуу кабели
• Тормоз рычагдары
• Көрсөтмө (бул документ)

4. Продукттун өзгөчөлүктөрү жана компоненттери

The TSDZ8 mid-drive motor kit offers advanced features for an enhanced electric cycling experience.

4.1 TSDZ8 Mid Motor

Сүрөт: Жакын план view of the TSDZ8 mid-drive motor highlighting its key specifications: 48V 750W, Max Torque >120N.m, Angle 35°, Waterproof IP65, and Weight 5.8KG. It also illustrates the three operational modes: Throttle Ebike Mode, Pedal Assist Mode, and Push Assist Mode.

The TSDZ8 motor is a 48V 750W unit designed for robust performance. It features a torque sensor for a natural pedaling feel, a maximum torque output of 140N.m, and an efficiency rate exceeding 80%. The motor is rated IP65 for water and dust resistance.

4.2 Dz40 Display

Сүрөт: деталдуу view of the Dz40 display, showing its physical dimensions (48mm x 27mm x 15mm), handlebar mounting diameter (22.2mm), and screen type (High-Brightness White Digital Tube). Key operational parameters like speed limit setting (0-61km/h), assist levels (5), and operating voltages (24V, 36V, 48V, 52V) are also presented.

The Dz40 display provides essential ride information and control over the motor's functions. It features a high-brightness white digital tube for clear visibility and offers 5 levels of pedal assist. The display is compatible with various operating voltages.

4.3 Component Upgrades (2024 Version)

Image: A comparison table illustrating the differences between the 2024 TSDZ8 and 2022 TSDZ2B versions. The TSDZ8 features 48V 750W power, 120N.m max torque, and weighs approximately 5.8KG, while the TSDZ2B has 48V 500W power, 80N.m max torque, and weighs about 3.5KG.

Image: A detailed comparison of upgraded components (TSDZ2B) versus older components (TSDZ2). The upgraded version includes a bidirectional free-wheeling clutch, an integrated reduction gear kit, and a new chainring bracket (screw hole center distance: 64mm). The old version featured a CSK30P one-way clutch, a detachable reduction gear kit, and an old chainring bracket (screw hole center distance: 73mm).

The 2024 TSDZ8 model incorporates significant upgrades, including a dual-clutch system for reduced resistance when pedaling without power, and a more robust integrated reduction shaft for increased longevity and reliability. The 1T4 cable simplifies the conversion process.

5. Орнотуу боюнча колдонмо

This section outlines the general steps for installing the TSDZ8 mid-drive motor kit. Professional installation is recommended if you are unfamiliar with bicycle mechanics.

5.1 Шайкештикти текшерүү

The TSDZ8 48V 750W mid-drive kit is designed for bicycles with a 68-73mm bottom bracket shell. Ensure your bicycle's bottom bracket falls within this range.

5.2 Керектүү куралдар

You will need standard bicycle tools, including a crank puller, bottom bracket tool, hex wrenches, and a torque wrench for precise tightening.

5.3 Орнотуу кадамдары (Жалпы)

1. Учурдагы компоненттерди алып салуу: Carefully remove your bicycle's existing crankset, bottom bracket, and chainring.
2. Моторду орнотуу: Insert the TSDZ8 motor into the bottom bracket shell. Ensure proper alignment and secure it using the provided mounting plate and nuts. Pay attention to chainring clearance to avoid contact with the frame.
3. Install Crank Arms and Chainring: Attach the new chainring to the motor and then install the crank arms. Tighten all bolts to the manufacturer's recommended torque specifications.
4. Install Display and Controls: Mount the Dz40 display, thumb throttle, and brake levers onto your handlebars. Position them for comfortable access.
5. Зымдарды туташтыруу: Use the 1T4 cable to connect the display, throttle, and brake levers to the motor. Connect the speed sensor to the motor and mount the sensor and magnet on the rear wheel/chainstay. Ensure all connections are snug and routed safely away from moving parts.
6. Коопсуз кабелдер: Use the provided cable ties to neatly secure all cables along the bicycle frame.
7. Акыркы текшерүү: Before riding, double-check all bolts, connections, and cable routing. Ensure the chain runs smoothly and the brakes function correctly.

6. Иштөө нускамалары

Familiarize yourself with the Dz40 display and the various operating modes to maximize your riding experience.

6.1 Күйгүзүү/өчүрүү

Press and hold the power button on the Dz40 display to turn the system on or off.

6.2 Педаль жардам системасы (PAS)

The TSDZ8 motor utilizes a torque sensor, providing assistance proportional to your pedaling effort. The Dz40 display offers 5 levels of pedal assist. Use the '+' and '-' buttons on the display to cycle through these levels. Higher levels provide more motor assistance.

6.3 Дроссельдин иштеши

The thumb throttle provides on-demand power, allowing you to propel the bicycle without pedaling. Use it cautiously, especially at lower speeds or in crowded areas.

6.4 Маалыматты көрсөтүү

The Dz40 display shows real-time information such as current speed, battery level, assist level, and potentially trip distance or odometer readings. Refer to the display's specific manual for detailed navigation of its functions.

7. Техникалык тейлөө жана кам көрүү

Proper maintenance ensures the longevity and optimal performance of your TSDZ8 mid-drive kit.

• Тазалоо: Clean the motor and display with a damp кездеме. Жогорку басымда түздөн-түз электрдик тетиктерди жуубаңыз.
• Майлоо: Keep your bicycle chain and other moving parts properly lubricated.
• Компонентти текшерүү: Regularly check all bolts and connections for tightness. Inspect cables for fraying or damage.
• Батареяга кам көрүү: Follow the battery manufacturer's instructions for charging and storage. (Note: Battery is sold separately).
• Кесиптик кызмат: For complex issues or internal motor maintenance, consult a qualified e-bike technician.

8. Кыйынчылыктарды

This section addresses common issues you might encounter with your TSDZ8 mid-drive kit.

If you encounter issues not listed here or if the suggested solutions do not resolve the problem, please contact Varstrom customer support for assistance.

9. Техникалык шарттар

10. Кепилдик жана Кардарларды колдоо

For warranty information, specific technical inquiries, or assistance with your Varstrom TSDZ8 Mid Drive Kit, please contact Varstrom customer support directly. Keep your purchase receipt as proof of purchase.

Manufacturer: Suzhou Tongsheng Electric Co., Ltd.

Brand: Varstrom