1. Киришүү
Thank you for choosing the ATOMSTACK A6 Ultra 6W Laser Engraver. This manual provides essential information for the safe and effective operation, setup, and maintenance of your device. Please read this manual thoroughly before using the product to ensure optimal performance and safety. The ATOMSTACK A6 Ultra is a high-precision laser engraving and cutting machine designed for various materials, featuring a 6W optical laser output and a unibody frame for ease of use.
2. Коопсуздук маалыматы
Operating a laser engraver involves potential risks. Adhere to all safety guidelines to prevent injury or damage to the equipment.
2.1 Жалпы коопсуздук чаралары
- Көздү коргоо: Always wear appropriate laser safety goggles when the laser is operating. The device includes a protective shield, but additional eye protection is recommended.
- Вентиляция: Operate the engraver in a well-ventilated area to dissipate fumes and smoke produced during engraving and cutting.
- Өрт коркунучу: Laser engraving can ignite flammable materials. Keep a fire extinguisher nearby and never leave the machine unattended during operation.
- Материалдык шайкештик: Лазердик иштетүү үчүн коопсуз деп көрсөтүлгөн материалдарды гана оюп же кесиңиз. Уулуу түтүн чыгаруучу же жогорку деңгээлде чагылдыруучу материалдардан алыс болуңуз.
- Балдар жана үй жаныбарлары: Keep children and pets away from the laser engraver at all times. The protective cover helps prevent accidental exposure to the laser point.
- Шашылыш токтотуу: Авариялык токтотуу баскычынын жайгашкан жери жана иштеши менен таанышыңыз.
- Электр камсыздоо: Use only the provided power adapter. Ensure the power supply meets the specified voltagд талаптар.
2.2 Integrated Safety Features
- Лазердик коргоочу капкак: The device is equipped with an orange protective cover that filters laser light, reducing the need for additional eyewear for observers and preventing pets from seeing the laser spot.
- Auto Laser Shut-off: The enclosure features two interlocks that automatically shut off the laser when the cover is opened during operation.
- Чектөө которгучтары: Four-direction limit switches provide enhanced safety by defining the operational boundaries of the laser module.
- Position Movement Protection & Fire Detection: The system includes features to detect abnormal movement and potential fire hazards, enhancing operational safety.
2.1-сүрөт: A visual representation of the ATOMSTACK A6 Pro's comprehensive safety features, including mechanisms for position movement protection, fire detection, double-layer eye protection, automatic laser shut-off when the cover is open, and four-direction limit switches for enhanced operational safety.
3. Пакеттин мазмуну
Пакетиңизде бардык буюмдар бар экенин текшериңиз:
- 1 x ATOMSTACK A6 Ultra Laser Engraving Machine
- 1 x B3 Dust Cover
- 1 x H2 Base Kit
- 1 x Power Adapter (100-240V AC, 50/60HZ input; 24V 5A output)
- 1 x USB кабели
- 1 х Колдонуучунун колдонмосу (бул документ)
- Necessary assembly tools and accessories (e.g., screws, wrenches)
4. Техникалык шарттар
| Өзгөчөлүк | Спецификация |
|---|---|
| Бренд | ATOMSTACK |
| Модел | A6 Ultra (A6 Pro) |
| Гравюра өлчөмү | 365 x 305 мм |
| Total Machine Power | 50 Вт |
| Оптикалык лазердин чыгуу кубаты | 5-6W |
| Лазердик толкун узундугу | 455 ± 5 нм |
| Лазердик Spot | 0.05 x 0.05 мм |
| Фокустоо режими | Fixed focus laser (no focusing required) |
| Операциялык программалык камсыздоо | LaserGRBL, LightBurn |
| Колдоого алынган операциялык системалар | Windows, Linux, macOS |
| Колдоого алынган File Форматтар | JPG, JPEG, SVG, PNG, BMP, PDF, G-код, DXF |
| Маалыматтарды өткөрүү ыкмасы | USB, APP |
| Power Input | 100-240V AC, 50/60HZ |
| Power Output | 24V 5A |
| Сертификаттар | CE, FCC, RoHS, FDA, PSE |
| Продукциянын өлчөмдөрү (L x W x Y) | 60 x 17 x 60 см |
| Продукт Салмагы | 7.5 кг |
| Модель номери | T-A6UH2 |
5. Орнотуу
The ATOMSTACK A6 Ultra features a unibody frame design, significantly simplifying the setup process. Most components are pre-assembled, allowing for quick deployment.
5.1 Алгачкы Ассамблея
- Таңылганын ачуу: Бардык компоненттерди таңгактан кылдаттык менен алып салыңыз.
- Позициялоо: Гравёрду туруктуу, тегиз бетке, жакшы желдетилген жерге коюңуз.
- Туташуу кубаты: Plug the power adapter into the engraver and then into a suitable power outlet.
- Компьютерге туташуу (милдеттүү эмес): If using a computer for control, connect the engraver to your computer via the provided USB cable.
- Программаны орнотуу: Install the recommended operating software (LaserGRBL or LightBurn) on your computer. Refer to the software's documentation for installation instructions.
5.1-сүрөт: A user setting up the ATOMSTACK A6 Pro laser engraver, highlighting its unibody frame design that requires no complex installation, allowing for immediate use after unboxing.
5.2-сүрөт: The ATOMSTACK A6 Pro laser engraver featuring its integrated camera for precise positioning, alongside a screenshot of the LightBurn software interface demonstrating its use.
6. Иштөө нускамалары
This section outlines the basic steps for operating your ATOMSTACK A6 Ultra laser engraver.
6.1 Гравировка/кесүүгө даярдоо
- Күйгүзүү: Turn on the main power switch of the engraver.
- Программалык камсыздоону ишке киргизүү: Open LaserGRBL or LightBurn software on your computer.
- Материалды жайгаштыруу: Place the material to be engraved or cut onto the working bed. Ensure it is flat and securely positioned.
- Фокустоо: The A6 Ultra features a fixed-focus laser, eliminating the need for manual focusing.
- Дизайнды импорттоо: Дизайныңызды импорттоо file (JPG, JPEG, SVG, PNG, BMP, PDF, G-Code, DXF) into the software.
- Параметр орнотуулары: Adjust laser power, speed, and passes according to the material type and desired effect. Refer to material testing guides for optimal settings.
- Позициялоо: Use the software's positioning features, potentially utilizing the built-in camera for precise alignment of your design on the material.
6.2 Ишти баштоо
- Коопсуздук текшерүү: Ensure all safety precautions are in place, including wearing safety goggles and confirming proper ventilation.
- Жумушту баштоо: Initiate the engraving or cutting process from the software.
- Мониторинг: Continuously monitor the machine during operation. Be prepared to use the emergency stop if any issues arise.
- Аяктоо: Once the job is complete, the laser will stop. Wait for any smoke or fumes to clear before opening the protective cover and removing the material.
6.3 Материалдык шайкештик
The ATOMSTACK A6 Ultra is compatible with a wide range of materials for engraving and cutting:
- Wood (Basswood, Pine wood, Paulownia, Bamboo)
- Акрил
- Тери
- Paper, Cardboard
- Кездеме
- Some plastics (ensure they do not produce toxic fumes)
Always perform small test engravings on new materials to determine optimal settings and ensure safe processing.
6.1-сүрөт: Сүрөт шоуcasing the ATOMSTACK A6 Pro laser engraver's versatility in processing different materials, including basswood, acrylic, pine wood, paulownia, bamboo, and leather, suitable for both cutting and engraving.
7. Техникалык тейлөө
Үзгүлтүксүз тейлөө сиздин лазердик оюгучуңуздун узак иштөөсүн жана оптималдуу иштешин камсыздайт.
- Линзаны тазалоо: Periodically clean the laser lens with a specialized lens cleaning solution and a lint-free cloth. A dirty lens can reduce laser power and engraving quality.
- Cleaning the Engraving Bed: Remove debris and dust from the engraving bed after each use. A clean bed helps maintain consistent engraving results.
- Майлоо: Check the guide rails and moving parts for smooth operation. Lubricate as needed with appropriate lubricants to prevent friction and wear.
- Программалык камсыздоонун жаңыртуулары: ATOMSTACK расмий өкүлүн текшериңиз website for any available firmware updates for your device to ensure you have the latest features and bug fixes.
- Коргоочу капкак: Keep the B3 Dust Cover clean to maintain visibility and ensure its protective properties. The integrated 7500RPM fan helps with efficient ventilation and dust removal.
7.1-сүрөт: The ATOMSTACK A6 Pro laser engraver enclosed within its protective cover, illustrating benefits such as noise reduction, fire resistance, efficient ventilation, and dust protection for a safer and cleaner engraving experience.
8. Кыйынчылыктарды
Бул бөлүмдө сиз туш болушуңуз мүмкүн болгон жалпы көйгөйлөр каралат жана мүмкүн болгон чечимдер сунушталат.
| Көйгөй | Мүмкүн себеп | Чечим |
|---|---|---|
| Лазер атылбайт | Power not connected; Emergency stop engaged; Software error; Protective cover open. | Check power connections; Release emergency stop; Restart software/computer; Ensure protective cover is fully closed. |
| Гравюра сапаты начар | Incorrect laser settings (power/speed); Dirty lens; Material not flat; Incorrect focus (though A6 Ultra is fixed focus, ensure material is at correct height). | Adjust laser power/speed in software; Clean laser lens; Ensure material is flat; Verify material height. |
| Машина компьютерге туташпай жатат | USB cable issue; Driver not installed; Software not recognizing device. | Try a different USB port/cable; Install necessary drivers; Restart software/computer; Check device manager for recognition. |
| Unexpected movement or stopping | Loose cables; Obstruction on rails; Software command error; Limit switch triggered. | Check all cable connections; Clear any obstructions; Restart job; Inspect limit switches for damage or obstruction. |
9. Кепилдик жана колдоо
For warranty information, please refer to the documentation provided at the time of purchase or contact your retailer. ATOMSTACK products typically come with a manufacturer's warranty covering defects in materials and workmanship.
For technical support, troubleshooting assistance beyond this manual, or inquiries about spare parts, please contact ATOMSTACK customer service through their official website or the contact information provided with your product. When contacting support, please have your model number (A6 Ultra / T-A6UH2) and purchase details ready.
