AQQA AQ136-1200W интеллектуалдык аквариум жылыткычынын колдонуу боюнча колдонмосу

Introduction

Thank you for choosing the AQQA AQ136-1200W Intelligent Aquarium Heater. This submersible heater is designed to maintain a stable and safe temperature for your aquatic environment, suitable for both freshwater and saltwater tanks ranging from 170 to 290 gallons. It features an intelligent protection system and an external controller for ease of use and enhanced safety.

Коопсуздук маалыматы

• Толук чөгүп кетүү: Always ensure the aquarium heater is fully submerged in water before plugging it in. Operating the heater out of water can cause damage and pose a safety risk.
• Суу айлануусу: Maintain good water circulation around the heater to ensure even heat distribution and accurate temperature readings.
• Муздатуу мезгили: After turning off the heater, allow it to cool in the water for 15-30 minutes before removing it. This prevents residual heat from damaging the unit or causing burns.
• Жайгашкан жери: Do not place the aquarium heater directly into sand or mud, as this can lead to inaccurate heating and potential malfunction.
• Ашыкча ысып кетүүдөн коргоо: The heater is equipped with an anti-overheat protection system. If the water temperature exceeds the set point by 1°F/1°C, heating stops. If it rises rapidly by 3°F/3°C, the display will flash the current temperature and heating will cease.
• Anti-Dry Burning Protection: If the heating rod is more than 1 inch (2.54 cm) out of the water, an "E0" error code will be displayed, and the heater will stop heating to prevent dry burning.
• Fish Safety: The heater features a protective PC plastic shell to prevent fish from coming into direct contact with the heating element and getting burned.

Продукт өзгөчөлүктөрү

• Туруктуу курулуш: Built with explosion-proof quartz glass and high-temperature resistant nickel-chromium heating wire for fast and efficient heating.
• Intelligent Automatic Heating: Maintains a constant temperature. Heating stops when the set temperature is reached and automatically resumes if the water temperature drops by 2°F/2°C below the set point.
• External Temperature Controller: Easily adjust temperature settings from outside the tank without getting your hands wet.
• Санариптик дисплейди тазалоо: Shows both set temperature and current water temperature.
• Температура бирдигин которуштуруу: Long press the 'SET' button for 5 seconds to switch between Fahrenheit (°F) and Celsius (°C).
• Өчүрүү эстутум функциясы: Retains the last set temperature after a power outage, eliminating the need to reset.
• Коргоочу Casing: PC plastic shell protects aquatic life from direct contact with the heating element.

Пакеттин мазмуну

• AQQA AQ136-1200W Aquarium Heater Unit
• External Temperature Controller with Power Cord
• Suction Cups for Heater Placement
• Adhesive Hook for Controller Placement
• User Manual

Орнотуу нускамалары

1. Сорох чөйчөктөрдү тиркөө: Securely attach the provided suction cups to the back of the heater unit.
2. Submerge Heater: Place the heater unit completely inside your aquarium, ensuring it is fully submerged in water. Position it in an area with good water flow for optimal performance.
3. Position Controller: Use the adhesive hook to attach the external temperature controller to the side of your aquarium or a convenient location nearby. Ensure the controller is easily visible and accessible.
4. Кубатка туташуу: Plug the heater's power cord into a suitable electrical outlet. The digital display on the controller will illuminate.

Иштөө нускамалары

1. Күйгүзүү: Once plugged in, the controller's digital display will show the current water temperature and the last set temperature.
2. Температураны коюу: Press the 'SET' button on the external controller to enter temperature setting mode. Each short press will increase the set temperature by 1°F or 1°C. The adjustable range is 59°F to 93°F (15°C to 34°C). The display will flash while setting. After a few seconds of inactivity, the setting will be saved.
3. Температура бирдигин которуштуруу: To switch between Fahrenheit (°F) and Celsius (°C), long press the 'SET' button for approximately 5 seconds.
4. Жылытуу көрсөткүчү: The display will show a red light or red bars when the heater is actively heating the water. Once the set temperature is reached and maintained, the light will turn green or the bars will indicate stability.

Техникалык тейлөө

• үзгүлтүксүз тазалоо: Clean the heater unit regularly to prevent algae and mineral buildup, which can affect its efficiency. Always unplug the heater and allow it to cool down before cleaning.
• Текшерүү: Periodically inspect the heater and its cords for any signs of damage, cracks, or wear. If any damage is observed, discontinue use immediately and contact customer support.
• Суу өзгөрүүлөр: During water changes, ensure the heater remains fully submerged. If the water level drops below the heater, it will automatically shut off (displaying "E0"). Allow the heater to cool before handling.

Проблемаларды чечүү

• "E0" Error Code: This indicates that the heating rod is exposed to air (more than 1 inch out of water). Immediately check the water level in your tank and refill if necessary. Ensure the heater is fully submerged.
• Temperature Flashing (3°F/3°C higher than set): This indicates an anti-overheat condition. The heater has stopped heating to prevent excessive temperature. Check for proper water circulation and ensure the set temperature is appropriate for your aquatic life.
• Heater Not Heating: Verify that the heater is properly plugged in and fully submerged. Check the set temperature against the current water temperature. If the current temperature is at or above the set temperature, the heater will not activate.
• Температураны туура эмес окуу: Ensure the heater is placed in an area with good water flow and not directly in substrate. Consider using a separate aquarium thermometer to cross-reference the reading.

Техникалык шарттар

Кепилдик жана колдоо

Specific warranty details are not provided in the product information. For any issues, questions, or warranty claims, please contact AQQA customer support directly through the retailer or the official AQQA website. Ensure you retain your proof of purchase for any support inquiries.