1. Киришүү
Welcome to the world of high-fidelity audio with your new Pro-Ject Debut EVO 2 Audiophile Turntable. This manual provides essential information for setting up, operating, and maintaining your turntable to ensure optimal performance and longevity. Please read it thoroughly before first use.
The Debut EVO 2 features a carbon fiber tonearm, electronic speed selection, and a pre-mounted Pick it MM EVO cartridge, designed for exceptional sound reproduction.
2. Орнотуу
Proper setup is crucial for the best sound quality and to prevent damage to your turntable and records.
2.1 Пакеттен чыгаруу жана жайгаштыруу
Carefully remove all components from the packaging. Retain the original packaging for future transport or service. Place the turntable on a stable, level surface, away from direct sunlight, heat sources, and vibrations.
Figure 2.1: Pro-Ject Debut EVO 2 Turntable with dust cover. Ensure the turntable is placed on a stable, level surface.
2.2 Пластинаны жана курду орнотуу
- Place the main platter onto the spindle.
- Locate the drive belt. Carefully stretch the belt around the motor pulley and the sub-platter rim.
Сүрөт 2.2: Жакын пландан view of the sub-platter and belt drive system. The belt connects the motor pulley to the sub-platter for rotation.
2.3 Тонерди жана картриджди орнотуу
The Debut EVO 2 comes with a pre-mounted Pick it MM EVO cartridge. Follow these steps for tonearm setup:
- Каршы салмакты жөндөө: Gently push the counterweight onto the rear of the tonearm. With the anti-skating weight removed, balance the tonearm so it floats freely and horizontally. Lock the tonearm in its rest.
- Tracking Force Setting: Rotate the tracking force scale ring to '0' while holding the counterweight steady. Then, rotate the counterweight (and scale ring) counter-clockwise until the desired tracking force (typically 1.8g for the Pick it MM EVO) is indicated.
- Конькиге каршы тууралоо: Attach the anti-skating weight to the small groove on the anti-skating stub. The recommended setting for the Pick it MM EVO cartridge is the second groove from the tonearm pivot.
Figure 2.3: Detail of the carbon fiber tonearm, showing the counterweight and anti-skating weight. These components are critical for proper cartridge tracking.
Figure 2.4: The pre-mounted Pick it MM EVO cartridge on the tonearm. This cartridge is designed to deliver lively and robust sound.
2.4 Байланыштар
Connect the supplied phono cable to the RCA output jacks on the rear of the turntable and to the phono input (or line input via a phono preamplifier) of your amplifier. Ensure the ground wire is connected to the ground terminal on your ampызы-чууну азайтуу үчүн көтөргүч.
Connect the power adapter to the turntable's power input and then to a suitable wall outlet.
Figure 2.5: Rear panel of the turntable with RCA output jacks and ground terminal. Proper connection to an amplifier is essential for audio output.
3. Иштөө нускамалары
This section details the steps for playing records and using the turntable's features.
3.1 Күйгүзүү жана ылдамдыкты тандоо
Press the power button to turn on the turntable. The Debut EVO 2 features electronic speed selection. Use the speed selector switch (usually located on the plinth) to choose between 33 1/3 RPM, 45 RPM, or 78 RPM (requires a different belt and stylus, sold separately).
Video 3.1: Pro-Ject Debut Evo 2 Introduction. This video provides a visual overview of the turntable's features and operation.
3.2 Пластинканы ойнотуу
- Табакка рекорд кой.
- Select the correct playback speed (33 1/3 or 45 RPM).
- Кью рычагын колдонуп, тонер рычагын көтөрүңүз.
- Carefully position the stylus over the lead-in groove of the record.
- Lower the tonearm gently using the cueing lever. The stylus will descend onto the record and begin playback.
3.1-сүрөт: жогорудан ылдыйга view of the turntable during record playback. The tonearm is positioned over the record.
3.3 Ойнотууну токтотуу
- Кью рычагын колдонуп, тонер рычагын көтөрүңүз.
- Тонец колду кайра ордуна коюп, тонец колдун клипсасы менен бекитиңиз.
- Turn off the turntable by pressing the power button.
4. Техникалык тейлөө
Үзгүлтүксүз тейлөө сиздин айлануучу табактын узак иштөөсүн жана оптималдуу иштешин камсыз кылат.
4.1 Айланма табакчаны тазалоо
- Чаң капкагы: Clean the dust cover with a soft, damp кездеме. Абразивдүү тазалагычтардан алыс болуңуз.
- Плинтус жана тактайча: Use a soft, lint-free cloth to wipe the plinth and platter. For stubborn marks, a slightly damp чүпүрөктү, андан кийин кургак чүпүрөктү колдонсо болот.
- Калем: Use a dedicated stylus cleaning brush or fluid to gently clean the stylus. Always brush from back to front.
4.2 Курду алмаштыруу
The drive belt may stretch or degrade over time. If you notice inconsistent speed or reduced performance, the belt may need replacement. Contact Pro-Ject support or an authorized dealer for a replacement belt.
5. Кыйынчылыктарды
Бул бөлүмдө сиз айлануучу табличкаңызда туш болушу мүмкүн болгон жалпы маселелер каралат.
| Көйгөй | Мүмкүн себеп | Чечим |
|---|---|---|
| Күч жок | Power cable not connected; faulty power outlet | Check power connections; try a different outlet |
| Бир же эки каналдан үн чыкпайт | Incorrect cable connection; damaged cartridge/stylus; amplifier input issue | Check RCA connections; ensure ground wire is connected; inspect stylus for damage; test amplifier with another source |
| Укмуш ызы-чуу | Ground wire not connected; proximity to other electronics; faulty cables | Ensure ground wire is securely connected; move turntable away from other devices; try different cables |
| Ыңгайсыз ылдамдык | Worn or stretched drive belt; motor issue | Replace drive belt; contact support if issue persists |
| Үндү өткөрүп жиберүү же бурмалоо | Incorrect tracking force/anti-skating; dirty stylus; damaged record | Re-adjust tracking force and anti-skating; clean stylus; inspect record for damage |
6. Техникалык шарттар
Key technical specifications for the Pro-Ject Debut EVO 2 Turntable.
- Модел: Дебют EVO 2
- Модель номери: 9120129864978
- Бренд: Pro-Ject
- Продукциянын өлчөмдөрү: 16.4 x 12.6 x 4.5 дюйм (41.66 x 32.00 x 11.43 см)
- Элемент Салмагы: 13.2 фунт (6 кг)
- Табактын материалы: Damped Aluminum (1.7kg, anti-magnetic)
- Тонарм: Carbon Fiber
- Картридж: Pick it MM EVO (pre-mounted)
- Ылдамдыгы: 33 1/3, 45 RPM (78 RPM with optional belt/stylus)
- Байланыш технологиясы: Auxiliary (RCA outputs)
- Камтылган компоненттер: Turntable, transparent dustcover, connection cable, power adapter, alignment protractor, single adapter.
- Өзгөчөлүктөр: Carbon Fiber Tonearm, Damped Aluminum Platter, High-Quality Cartridge, Electronic Speed Selection, 25-Year Spare Parts Guarantee.
7. Кепилдик маалыматы
Pro-Ject Audio Systems offers a 25-year spare parts availability guarantee for this turntable, ensuring long-term support for your product. For specific warranty terms and conditions, please refer to the warranty card included with your product or visit the official Pro-Ject webсайт.
Ошондой эле, төмөнкү коргоо пландарын сатып алууга болот:
- 2 жылдык коргоо планы
- 3 жылдык коргоо планы
- Толук коргоо (айлык план)
8. Колдоо жана байланыш
For technical assistance, troubleshooting beyond this manual, or spare parts inquiries, please contact your authorized Pro-Ject dealer or visit the official Pro-Ject Audio Systems webколдоо булактары үчүн сайт.
Сиз да зыярат кылсаңыз болот Amazon'догу Pro-Ject дүкөнү кошумча продукт маалымат жана аксессуарлар үчүн.
