Scheppach HS254 үстөл араа колдонуучу колдонмосу

Introduction

Thank you for choosing the Scheppach HS254 Table Saw. This powerful and versatile tool is designed for precise cutting of various wood materials, including beams, profile boards, and planks, as well as for longitudinal and miter cuts. Equipped with a 2200 W motor, soft start, and overload protection, it ensures efficient and safe operation.

This manual provides essential information for the safe assembly, operation, maintenance, and troubleshooting of your Scheppach HS254 Table Saw. Please read this manual thoroughly before initial use to ensure proper handling and to maximize the lifespan of your tool. Keep this manual for future reference.

Figure 1: ашыкview of the Scheppach HS254 Table Saw with its robust stand and extended table surface.

Коопсуздук нускамалары

Always observe the following safety precautions to prevent electric shock, fire, and serious injury. Familiarize yourself with all controls and proper use of the machine before operation.

• Жеке коопсуздук: Always wear appropriate personal protective equipment (PPE), including safety glasses, hearing protection, and a dust mask. Do not wear loose clothing or jewelry that could get caught in moving parts.
• Жумуш аймагынын коопсуздугу: Иштеген жериңизди таза жана жарыктандырыңыз. Башаламан же караңгы жерлер кырсыкка чакырат. Жарылуучу чөйрөдө, мисалы, күйүүчү суюктуктар, газдар же чаң бар жерде электр шаймандарын иштетпеңиз.
• Электр коопсуздугу: кубат менен камсыз кылуу Voltage specified on the tool. Avoid body contact with earthed or grounded surfaces. Do not abuse the cord; never use it for carrying, pulling, or unplugging the power tool.
• Куралды колдонуу жана кам көрүү: Электр аспапты күчтөп албаңыз. Колдонмоңуз үчүн туура электр шайманын колдонуңуз. Кандайдыр бир тууралоолорду жасоодон, аксессуарларды алмаштыруудан же электр шаймандарын сактоодон мурда вилканы кубат булагынан ажыратыңыз.
• Үстөл араасына тиешелүү коопсуздук:
  • Always use the blade guard and splitter.
  • Use a push stick or push block when making narrow cuts.
  • Never reach over or behind the saw blade.
  • Ensure the workpiece is firmly supported and guided.
  • Do not remove cut-off pieces until the blade has stopped.
  • Maintain a safe distance from the blade.
• Тейлөө: Regularly inspect the saw blade for sharpness and damage. Keep all guards and safety devices in place and in working order.

Пакеттин мазмуну

Upon unpacking, verify that all components are present and undamaged. If any parts are missing or damaged, contact your dealer immediately.

• Scheppach HS254 Table Saw unit
• Saw blade (254 mm diameter, 24 teeth)
• Cross-cut gauge
• Longitudinal stop (rip fence)
• Түртүү таякчасы
• Table extensions (left and right)
• Монтаждоочу жабдуулар жана шаймандар (эгер бар болсо)
• User Manual

Орнотуу жана чогултуу

The Scheppach HS254 Table Saw requires some assembly before first use. Follow these steps carefully to ensure proper and safe setup.

1. Пакеттен чыгаруу: Carefully remove all components from the packaging. Retain packaging materials for potential future transport or storage.
2. Стенд жыйыны: Assemble the robust steel sheet base according to the provided diagrams. Ensure all bolts are securely tightened for stability.
3. Арааны орнотуу: Securely attach the table saw unit to the assembled stand. Verify that it is stable and level.
4. Installing Table Extensions: Attach the table extensions to both sides of the main table. These extensions are crucial for supporting larger workpieces.
5. Blade орнотуу: If the saw blade is not pre-installed, follow the instructions to securely mount the 254 mm saw blade. Ensure the blade's rotation direction matches the arrow on the saw.
6. Guard and Fence Installation: Install the blade guard, splitter, and both the cross-cut gauge and longitudinal stop (rip fence). Ensure they move freely and lock securely.
7. Кубат туташуу: Connect the power cable to a suitable 230V AC power outlet. Ensure the power switch is in the "OFF" position before plugging in.

Figure 2: Table extensions installed, allowing for the processing of large workpieces.

Иштөө нускамалары

This section details the operation of your Scheppach HS254 Table Saw for various cutting tasks.

1. Күйгүзүү / Өчүрүү

• To turn on the saw, press the green "ON" button. The 2200W motor features a soft start function for smooth power-up.
• Арааны өчүрүү үчүн кызыл "ӨЧҮРҮҮ" баскычын басыңыз.
• The saw is equipped with overload protection to prevent damage to the motor. If the motor stops due to overload, turn off the saw, allow it to cool, and reduce the cutting load.

Figure 3: Illustration of the soft start function and blade rotation speed (5300 rpm).

2. Adjusting Blade Height

Use the handwheel to comfortably and continuously adjust the saw blade's height. For optimal cutting, the blade should extend slightly above the workpiece.

• Maximum cutting height at 90° is 85 mm.
• Maximum cutting height at 45° is 63 mm.

3. Adjusting Blade Angle (Miter Cuts)

The saw blade can be continuously tilted from 0° to 45° for precise miter cuts.

• Бурчту тууралоо үчүн кулпу механизмин бошотуңуз.
• Use the angle scale to set the desired angle.
• Tighten the locking mechanism securely before cutting.

Figure 4: Adjusting the saw blade for precise miter cuts (0-45°).

4. Using the Rip Fence (Longitudinal Cuts)

The longitudinal stop (rip fence) is used for making accurate parallel cuts along the length of the workpiece.

• Position the rip fence to the desired width using the scale on the table.
• Lock the rip fence firmly in place.
• Always use a push stick when feeding the workpiece, especially for narrow cuts.

Figure 5: Close-up of the rip fence and continuous scale for precise workpiece processing.

5. Using the Cross-Cut Gauge

The cross-cut gauge is adjustable from -60° to +60° and is ideal for precise cross-cuts and angled cuts across the width of the workpiece.

• Insert the cross-cut gauge into the miter slot on the table.
• Adjust the angle as required and lock it.
• Hold the workpiece firmly against the gauge and feed it smoothly through the blade.

6-сүрөт: Мисamples of cuts: beams, profile boards, longitudinal cuts, miter cuts, and general board cuts.

6. Чаңды чыгаруу

The Scheppach HS254 features an integrated connection for dust extraction. Connect a suitable dust extractor to keep your work area clean and reduce airborne dust.

Техникалык тейлөө

Үзгүлтүксүз тейлөө үстөл арааңыздын узак жана коопсуз иштешин камсыздайт.

• Тазалоо: After each use, disconnect the saw from power and clean off sawdust and debris from the table, blade guard, and motor housing. Use a brush or compressed air.
• Бычак текшерүү: Regularly check the saw blade for sharpness, missing teeth, or cracks. A dull or damaged blade can cause kickback and poor cut quality. Replace damaged blades immediately.
• Майлоо: Periodically lubricate moving parts such as the blade height and angle adjustment mechanisms as recommended in the full service manual (if applicable).
• Бекер текшерүү: Мезгил-мезгили менен бардык гайкалардын, болттордун жана бурамалардын бекемдигин текшерип туруңуз. Ар кандай бошогон бекиткичтерди бекемдеңиз.
• Сактагыч: Store the table saw in a dry, secure location, out of reach of children and unauthorized users.

Проблемаларды чечүү

Бул бөлүмдө үстөл арааңызда кездешүүсү мүмкүн болгон жалпы маселелер каралат.

Техникалык шарттар

Figure 7: Visual representation of maximum cutting heights at 90° and 45°, and blade tilt range.

Кепилдик жана колдоо

Scheppach products are manufactured to high quality standards. In the unlikely event of a defect, please refer to your purchase documentation for warranty details. For technical support, spare parts, or service inquiries, please contact your authorized Scheppach dealer or visit the official Scheppach webбайланыш маалыматы үчүн сайт.

Please have your model number (HS254 / 5901326901) and purchase date available when contacting support.