ECOELER YWT102

ECOELER YWT102 Артка саноо таймеринин которгучун колдонуучунун колдонмосу

Model: YWT102

Introduction

This manual provides comprehensive instructions for the installation, operation, and maintenance of your ECOELER YWT102 Countdown Timer Switch. This in-wall timer switch is designed to automatically turn off connected loads such as lights, ceiling fans, bathroom fans, and heaters after a preset time, contributing to energy savings and convenience. It features multiple preset countdown options and a manual override function.

ECOELER Countdown Timer Switch (Ivory, 2-Pack)

Image: The ECOELER Countdown Timer Switch in Ivory, shown as a 2-pack.

Продукт өзгөчөлүктөрү

  • 8 Pre-Set Options: Offers countdown settings of 1 minute, 5 minutes, 10 minutes, 15 minutes, 30 minutes, 60 minutes, 2 hours, or 4 hours.
  • Кол менен жокко чыгаруу: Allows instant ON/OFF control, overriding any active countdown.
  • Энергияны үнөмдөө: Automatically turns off loads, preventing accidental energy waste. Ideal for lights, ceiling fans, bathroom fans, and heaters.
  • Жөнөкөй операция: Features Countdown mode and Constant On mode. Select time with a button press; hold ON/OFF for 5 seconds to activate Constant On.
  • LED көрсөткүчү: An always-on LED light makes the switch easy to locate in low-light conditions.
  • Кеңири колдонуу: Suitable for bathrooms, closets, pantries, garages, laundry rooms, spas, and enclosed patios.
  • Коопсуз жана ишенимдүү: ETL listed, supporting LED/CFL, Incandescent (800W), Fluorescent (1200VA) light bulbs, and motors (1/2 HP).
ECOELER Countdown Timer Switch Product Features

Сүрөт: деталдуу view of the ECOELER Countdown Timer Switch buttons and LED indicator labels, highlighting its features.

Пакеттин мазмуну

Upon opening your ECOELER Countdown Timer Switch package, you should find the following items:

  • ECOELER YWT102 Countdown Timer Switch
  • Matching Wall Plate
  • Wire Nuts
  • Орнотуу боюнча колдонмо
ECOELER Countdown Timer Switch Package Contents and Dimensions

Image: The ECOELER Countdown Timer Switch, wire nuts, and face plate, along with product dimensions.

Коопсуздук маалыматы

ЭСКЕРТҮҮ: To prevent serious injury or death from electric shock, always turn OFF the power at the circuit breaker or fuse box before wiring. This device is intended for installation in accordance with the National Electric Code and local regulations. Use copper wires only. If you are unsure about any part of these instructions, consult a qualified electrician.

Техникалык шарттар

СпецификацияНарк
БрендECOELER
Модель номериYWT102
ТүсПил сөөгү
Продукциянын өлчөмдөрү4.19 x 3.71 x 11.99 см
Power/Wattage1800 ватт
МатериалCopper, Metal, Polycarbonate
Элемент Салмагы136 г
Иштөө режимиКҮЙГҮЗҮҮ ӨЧҮРҮҮ
Учурдагы рейтинг15 Amps
Operating Voltage120 вольт (AC)
Байланыш түрүАдатта ачык
Которуу түрүPush Button
ТерминалЭлектр өткөргүч

Орнотуу

Follow these steps carefully to install your ECOELER Countdown Timer Switch. If you are not comfortable performing electrical work, please consult a qualified electrician.

Алдын ала орнотуу

  1. Кубатты өчүрүү: Locate your circuit breaker panel and turn off the power to the switch box where you will be installing the timer. Verify that the power is off using a voltage сыноочу.
  2. Учурдагы которгучту алып салуу: Carefully remove the screws holding the existing wall plate and switch. Gently pull the switch out of the wall box.
  3. Зымдарды аныктоо: Identify the wires connected to your existing switch. Typically, you will find:
    • Hot Wire: Usually black, brings power from the circuit breaker.
    • Жүктөө зымы: Usually black or red, carries power to the light/fan.
    • Нейтралдуу зым: Адатта ак. A neutral wire is required for this timer switch.
    • Жер зымы: Адатта, жашыл же жылаңач жез.

Зымдарды туташтыруу

Connect the wires from the wall box to the ECOELER Countdown Timer Switch as follows:

Wiring diagram for ECOELER Countdown Timer Switch

Image: Wiring diagram for the ECOELER Countdown Timer Switch, illustrating connections for Load (Red), Hot (Black), Ground (Green), and Neutral (White) wires. Note: Neutral Wire Must Be Required.

  1. туташтыруу Кызыл зым from the timer to the Зымды жүктөө from the wall box using a wire nut.
  2. туташтыруу Кара зым from the timer to the Ысык зым from the wall box using a wire nut.
  3. туташтыруу Ак зым from the timer to the Нейтралдуу зым from the wall box using a wire nut.
  4. туташтыруу Жашыл зым from the timer to the Жер зымы from the wall box using a wire nut.

Орнотуудан кийин

  1. Carefully push all wires back into the wall box.
  2. Secure the timer switch to the wall box with the provided screws.
  3. Attach the new wall plate over the timer switch.
  4. Күчтү калыбына келтирүү: Return to your circuit breaker panel and turn the power back ON.

Иштөө нускамалары

The ECOELER Countdown Timer Switch offers two primary operating modes: Countdown Mode and Constant On Mode.

Артка саноо режими

Артка саноону иштетүү үчүн:

  1. Press the desired time button (1 Min, 5 Min, 10 Min, 15 Min, 30 Min, 60 Min, 2 Hour, or 4 Hour).
  2. The corresponding LED indicator will illuminate, and the countdown will begin.
  3. The connected load (light, fan, etc.) will turn off automatically once the selected time expires.
  4. To cancel a countdown manually, press the large ON/OFF button at the bottom.

Constant On Mode (Manual Override)

To keep the connected load continuously ON, bypassing the timer function:

  1. Press and hold the large ON/OFF button at the bottom for more than 5 seconds.
  2. The load will remain ON until the ON/OFF button is pressed again to turn it off.
ECOELER Countdown Timer Switch LED Indicators in Dark

Image: The ECOELER Countdown Timer Switch with its LED indicator illuminated, making it visible in a dark environment.

Техникалык тейлөө

The ECOELER Countdown Timer Switch requires minimal maintenance. To ensure optimal performance and longevity:

  • Keep the switch and wall plate clean by wiping with a soft, damp кездеме. Абразивдүү тазалагычтардан же эриткичтерден качыңыз.
  • Коммутатордун ашыкча нымдуулукка же өтө жогорку температурага дуушар болбогонун текшериңиз.
  • Periodically check the connections for any signs of loosening, though this should only be done with the power turned off at the circuit breaker.

Проблемаларды чечүү

If you encounter issues with your ECOELER Countdown Timer Switch, consider the following:

  • Которуу Жооп бербейт: Ensure the power is ON at the circuit breaker. Check all wire connections for tightness.
  • Load Not Turning Off: Verify that the switch is not in Constant On mode (manual override). If it is, press the ON/OFF button to turn it off.
  • LED индикатору күйбөйт: Check power supply and connections. If the switch is functioning otherwise, the LED might be faulty, but this is rare.
  • Үзгүлтүксүз иштөө: Ensure all wire connections are secure. Loose connections can cause inconsistent performance.

If problems persist after checking these points, please contact customer support.

Кепилдик жана колдоо

The ECOELER Countdown Timer Switch comes with a 1 жылдык кепилдик. For any questions, technical assistance, or warranty claims, please contact ECOELER customer support. You can reach us via email at SUPPORTS@ECOELER.COM. We aim to respond to all inquiries within 24 hours.

Manufacturer: ECOELER ELECTRIC INC

Тектеш документтер - YWT102

Preview ECOELER YM2108T Motion Sensor Light Switch Орнотуу жана Колдонуучунун колдонмосу
ECOELER YM2108T кыймыл сенсорунун жарык өчүргүчтөрүн орнотуу, зымдарды туташтыруу, жөндөө жана көйгөйлөрдү чечүү боюнча комплекстүү колдонмо. Функцияларга PIR аныктоо, убакытты кечиктирүү жана люкс деңгээлиндеги орнотуулар кирет.