Xtreme 25ft Multicolored LED Strip Lights

Introduction

This manual provides instructions for the Xtreme 25ft Multicolored LED Strip Lights, Model XLS7-1005-MCW. This product features 225 RGBW LEDs, offering 15 distinct colors and 4 dynamic lighting modes. It is designed for indoor use and includes a remote control for convenient operation. Please read this manual thoroughly before installation and use to ensure proper function and safety.

Пакеттин мазмуну:

1-сүрөт: Пакеттин мазмуну. The image displays the 25ft LED strip on a reel, flexible connectors, a remote control with two AAA batteries, a set of strip mounting clips and cable mounting clips, a 5V USB power adapter, and the user manual.

• 1 x 25ft Multicolored LED Strip
• 1 x Алыстан башкаруу
• Flexible Connectors (for cutting and reconnecting)
• 1 x 5V USB Power Adapter
• Set of Strip Mounting Clips and Cable Mounting Clips
• User Manual

Маанилүү коопсуздук маалыматы

• Бул продукт үчүн иштелип чыккан үй ичинде гана колдонууСууга же нымдуулукка тийгизбеңиз.
• Ensure the power adapter is compatible with your local power supply (5V USB).
• Do not connect the LED strip to power while it is still on the reel. Unroll completely before use.
• Avoid bending the LED strip sharply or applying excessive force, as this may damage the internal circuitry.
• Балдар жетпеген жерде сактаңыз.
• Do not attempt to repair or modify the product. Contact customer support if issues arise.
• Желимдин оптималдуу иштеши үчүн, орнотуу бетинин таза, кургак жана жылмакай экенине ынаныңыз.

Орнотуу жана орнотуу

1. Бетти даярдоо: Clean the desired installation surface thoroughly. Ensure it is dry, smooth, and free of dust or grease.
2. Макетти пландоо: Unroll the LED strip and plan its placement. Avoid sharp bends.
3. Тилкени колдонуңуз: Peel off a small section of the adhesive backing from the LED strip. Carefully press the strip onto the prepared surface, gradually peeling off more backing as you go. Apply firm, even pressure along the entire length.
4. Клиптер менен коргоо (кошумча): For added security, especially on textured surfaces or corners, use the provided mounting clips.
5. Cutting and Reconnecting (Optional):

   If a shorter length is required, the LED strip can be cut at designated cut marks (indicated by a scissor icon or copper pads). Ensure the power is disconnected before cutting.

   

   Figure 2: Cutting the LED Strip. Step 1 shows scissors cutting the strip at a designated mark. The image also shows the remote control and the LED strip's color capabilities.

   To reconnect, align the copper pads of the cut strip with the pins inside a flexible connector. Close the connector securely. Repeat for additional sections or corners.

   

   Figure 3: Using Connectors for Corners. A flexible connector is used to create a clean, professional corner with the LED strip.

6. Туташуу кубаты: Plug the LED strip's USB connector into the provided 5V USB power adapter, then plug the adapter into a standard wall outlet.

Иштөө нускамалары

The Xtreme LED Strip Lights are controlled using the included remote control.

4-сүрөт: Алыстан башкаруу пульту. The remote features buttons for power, dimming, color selection (15 colors), and four dynamic modes.

Алыстан башкаруу функциялары:

• КҮЙГҮЗҮҮ/ӨЧҮРҮҮ: Press to turn the LED strip lights on or off.
• КАЛТЫРУУ: Resets the light strip to its default settings.
• DIMMER (Sun Icon): Adjusts the brightness level of the lights. Press repeatedly to cycle through brightness levels.
• COLOR SELECTION: Choose from 15 distinct static colors by pressing the corresponding color button.
• РЕЖИМ ТАНДОО:
  • ФЛЕШ: Rapidly cycles through colors.
  • STROBE: Flashes a single color on and off.
  • ӨЧҮП: Түстөрдүн ортосунда жылмакай өтүү.
  • ЖИЛИК: Gradually changes between colors with a softer transition than Fade.
• WHITE LIGHTS: Buttons for COOL, SOFT, WARM, and PURE white light options.

Ensure the remote control is pointed towards the receiver on the LED strip for optimal response.

Техникалык тейлөө

• Тазалоо: Disconnect power before cleaning. Gently wipe the LED strip with a dry, soft cloth. Do not use liquid cleaners or abrasive materials.
• Сактагыч: If storing the LED strip for an extended period, carefully roll it back onto its original reel or a similar circular object to prevent kinks and damage. Store in a cool, dry place.
• Клей: The adhesive backing is designed for single-use application. If the strip needs to be re-positioned, additional mounting clips or a new adhesive solution may be required.

Проблемаларды чечүү

Продукт спецификациялары

Кепилдик жана колдоо

For warranty information or technical support, please refer to the contact details provided with your purchase documentation or visit the official Xtreme Digital Lifestyle Accessories webсайт.

For general inquiries, you may visit the brand's Amazon store: Xtreme Digital Lifestyle Accessories Store.