1. Киришүү
Thank you for choosing the BOMGE Wireless XLR Transmitter and Receiver system. This system provides a stable and reliable wireless solution for dynamic microphones, guitars, and other audio equipment, ensuring high-quality audio transmission without the constraints of cables. Please read this manual carefully before use to ensure proper operation and maximize the product's lifespan.
2. Продукт бүтүп калдыview жана компоненттер
The BOMGE Wireless XLR system includes a transmitter (TX) and a receiver (RX) unit, along with necessary accessories for versatile connectivity.
Image: The BOMGE Wireless XLR Transmitter and Receiver units, accompanied by two 6.35mm XLR adapters, a USB charging cable, and a small instruction manual.
2.1 Пакеттин мазмуну
- 1 x BOMGE Wireless XLR Transmitter (TX)
- 1 x BOMGE Wireless XLR Receiver (RX)
- 2 x 6.35mm XLR Adapters
- 1 x USB заряддоо кабели
- 1 x User Manual
2.2 Компонентти идентификациялоо
Image: Detailed diagram illustrating the components of both the receiver and transmitter units. The receiver features a Microphone XLR Interface, Display, Switch, and Charging Interface. The transmitter includes an XLR Interface, Spring Buckle, Display, Frequency Adjustment buttons (CH+, VOL+), Volume Adjustment buttons (CH+, VOL+), and a Charging Interface.
Алуучу (RX)
- Microphone XLR Interface: Connects to audio input devices.
- Дисплей: Каналды, батареянын абалын жана башка маалыматты көрсөтөт.
- Которуу: Күйгүзүү/өчүрүү баскычы.
- Заряддоо интерфейси: заряддоо үчүн USB порту.
Бергич (TX)
- XLR Interface: Connects to microphones or instruments.
- Spring Buckle: Secures the connection.
- Дисплей: Каналды, батареянын абалын жана башка маалыматты көрсөтөт.
- Frequency Adjustment (CH+/CH-): Buttons to change the operating frequency channel.
- Volume Adjustment (VOL+/VOL-): Buttons to adjust the output volume.
- Которуу: Күйгүзүү/өчүрүү баскычы.
- Заряддоо интерфейси: заряддоо үчүн USB порту.
3. Өзгөчөлүктөрү
- Designed for Dynamic Microphones & Instruments: Compatible with any dynamic microphone, guitar, audio mixer, and PA system. Includes 6.35mm XLR adapters for broader connectivity.
- UHF Crystal Clear Audio: Utilizes Ultra-High Frequency (UHF) technology for anti-interference capabilities and an optimal frequency response range, ensuring stable, reliable, and lossless high-quality audio transmission.
- 16 Available Channels: Offers 16 selectable channels to prevent interference, even when multiple systems are used simultaneously.
- Stable Wireless Signal: Operates within the 510MHz-560MHz frequency band, providing up to 100 feet (approximately 30 meters) of wireless range. For maximum distance, minimize obstructions and interference between units.
- Versatile Input Switching (48V/5V/0V): Features a switch button to select between 48V (for condenser microphones requiring phantom power), 5V (for capacitive microphones), and 0V (for moving coil/dynamic microphones). This ensures compatibility with various microphone types.
- USB кайра заряддалуучу: Built-in lithium battery provides up to 5 hours of continuous use on a 2-3 hour charge.
- Кош Plug шайкештиги: Equipped with both XLR male and 1/4'' male plugs, allowing connection to a wide range of equipment such as mixers, ampлиферлер жана баяндамачылар.
Image: Illustration of the three input modes: 0V for moving coil microphones, 5V for capacitive microphones, and 48V for capacitive microphones requiring phantom power.
Image: Highlights key performance features: 1) Low latency and quick response for plug-and-play operation. 2) Built-in 900mAh battery capacity for extended use. 3) Ultra-pure music restoration without loss.
Image: Demonstrates the wide compatibility of the system with a power amplifier, mixer, speakers, mixer sound card, and electric guitar.
4. Орнотуу
Follow these steps to set up your BOMGE Wireless XLR system:
- Бирдиктерди заряддоо: Before first use, fully charge both the transmitter (TX) and receiver (RX) units using the provided USB charging cable. The display will indicate charging status.
- Өткөргүчтү туташтыруу: Plug the transmitter (TX) into your dynamic microphone or instrument's XLR output. If connecting to a 6.35mm (1/4") jack, use one of the included 6.35mm XLR adapters.
- Кабылдагычты туташтыруу: Plug the receiver (RX) into the XLR input of your audio mixer, PA system, amplifier, or other audio input device. If connecting to a 6.35mm (1/4") jack, use the other included 6.35mm XLR adapter.
- Күйгүзүү: Press and hold the Power button on both the transmitter and receiver until their displays light up.
- Жупташтыруу (Автоматтык түрдө): The units should automatically pair. If they do not, ensure they are within range and try powering them off and on again. The display will show the connected channel.
- Select Input Mode (Transmitter): For microphones, use the 48V/5V/0V input switching button on the transmitter to match your microphone type (48V for condenser requiring phantom power, 5V for capacitive, 0V for dynamic/moving coil).
5. Иштөө нускамалары
5.1 Күйгүзүү/өчүрүү
- Күйгүзүү үчүн: Press and hold the "POWER" button on both the TX and RX units for approximately 2 seconds until the display illuminates.
- Өчүрүү үчүн: Press and hold the "POWER" button on both units for approximately 2 seconds until the display turns off.
5.2 Каналды тандоо (өткөргүч)
The system supports 16 channels to avoid interference.
- On the transmitter (TX), short press the "CH+" or "CH-" button to cycle through available channels.
- The receiver (RX) will automatically synchronize to the selected channel.
5.3 Volume Adjustment (Transmitter)
- On the transmitter (TX), short press the "VOL+" or "VOL-" button to adjust the output volume level.
- Monitor your audio output device to set an appropriate volume.
5.4 Input Mode Selection (Transmitter)
The transmitter features a 48V/5V/0V input switching button to accommodate different microphone types.
- 0V режими: For dynamic (moving coil) microphones.
- 5V режими: For capacitive microphones that do not require full phantom power.
- 48V режими: For condenser microphones that require 48V phantom power.
Ensure the correct mode is selected for your connected microphone to prevent damage or poor audio quality.
Image: A user is shown operating a microphone with the BOMGE wireless transmitter attached, demonstrating its use in a recording or performance setting.
6. Техникалык тейлөө
6.1 Заряддоо
- Use the provided USB charging cable to charge the units.
- Толук кубаттоо адатта 2-3 саатка созулат.
- The display will show battery level indicators. Charge when the battery icon is low.
Image: This graphic emphasizes the system's built-in lithium battery, capable of providing 6-8 hours of continuous use, ensuring reliable performance.
6.2 Тазалоо
- Түзмөктөрдү жумшак, кургак чүпүрөк менен сүртүңүз.
- Катуу химиялык заттарды же абразивдүү тазалоочу каражаттарды колдонбоңуз.
6.3 Сактоо
- Түзмөктөрдү салкын, кургак жерде, күндүн нуру түз тийбеген жана өтө жогорку температурадан алыс сактаңыз.
- If storing for extended periods, charge the batteries periodically to maintain their health.
7. Кыйынчылыктарды
If you encounter issues with your BOMGE Wireless XLR system, refer to the following common problems and solutions:
| Көйгөй | Мүмкүн себеп | Чечим |
|---|---|---|
| Үн жок же үзгүлтүксүз үн жок | Low battery; Units not paired; Incorrect channel; Interference; Incorrect input mode; Loose connection. | Charge units fully; Power cycle both units to re-pair; Change channel; Move away from other wireless devices; Select correct 48V/5V/0V mode; Ensure all cables and adapters are securely connected. |
| Батареянын иштөө мөөнөтү кыска | Incomplete charging; Aging battery. | Ensure units are charged for the full 2-3 hours; If battery life significantly degrades over time, contact customer support. |
| Poor audio quality (static, distortion) | Interference; Out of range; Incorrect volume level; Damaged cable/adapter. | Change channel; Reduce distance between TX and RX; Adjust volume levels on both units and connected equipment; Test with different cables/adapters. |
| Units do not power on | Battery completely drained; Faulty unit. | Connect to charger and wait a few minutes before attempting to power on; If still unresponsive, contact customer support. |
8. Техникалык шарттар
Detailed technical specifications for the BOMGE Wireless XLR System:
Image: A visual representation of the Wireless XLR System's key specifications, including Model: T92, Working Frequency: UHF, Frequency Response: 40Hz-20KHz, Receiving Distance: 196 feet, Delay: <1ms, and Support for Dynamic mic/Guitar.
- Модел: WTU-02 (also referred to as T92 in some specifications)
- Иштөө жыштыгы: UHF (510MHz-560MHz)
- Жыштык жообу: 40Гц-20КГц
- Кабыл алуу аралыктары: 196 футка чейин (болжол менен 60 метр)
- Кечигүү: <1 мс
- Батарея түрү: Литий-ион (2 камтылган)
- Батареянын иштөө мөөнөтү: Up to 5 hours continuous use (2-3 hours charging time)
- Киргизүү көлөмүtage Режимдер: 48V / 5V / 0V switchable
- Колдоого алынган түзмөктөр: Dynamic microphones, condenser microphones (with appropriate voltage mode), guitars, audio mixers, PA systems, ampаман калгандар.
- Элемент Салмагы: 0.009 унция (болжол менен 0.25 грамм)
- Продукциянын өлчөмдөрү: 3.74 x 1.5 x 0.98 дюйм (болжол менен 9.5 x 3.8 x 2.5 см)
9. Кепилдик жана колдоо
BOMGE products are designed for reliability and performance. For warranty information, technical support, or service inquiries, please refer to the contact information provided with your purchase or visit the official BOMGE webсайт. Сатып алуу квитанциясын кепилдик дооматтары үчүн сатып алуунун далили катары сактаңыз.
