1. Киришүү
Welcome to the world of electric skateboarding with your new MEEPO Campus V5 Series/Envy Electric Skateboard. This manual provides essential information for the safe and optimal operation, maintenance, and care of your skateboard. Please read it thoroughly before your first ride to ensure a safe and enjoyable experience.
Figure 1: MEEPO Campus V5 Series/Envy Electric Skateboard (Top, Side, and Bottom Views)
2. Коопсуздук боюнча көрсөтмөлөр
Your safety is paramount. Electric skateboards can reach high speeds and require careful handling. Always adhere to the following safety guidelines:
- Коргоочу шаймандарды кийүү: Ар дайым туулга, тизе жаздыкчалары, чыканак жаздыкчалары жана билек коргоочулары кийиңиз.
- Check Your Board: Before each ride, inspect the board for any loose components, wheel damage, or battery issues.
- Understand Your Surroundings: Ride in safe, open areas away from traffic, pedestrians, and obstacles.
- Чекиңизди билиңиз: Start at low speeds and gradually increase as you become more comfortable.
- Аба ырайы шарттары: Нымдуу шарттарда, катуу жамгырда же тайгак жерлерде жүрүүдөн качыңыз.
- Жергиликтүү мыйзамдар: Be aware of and comply with all local laws and regulations regarding electric skateboards.
- Жашы жана салмагы чектери: This product is suitable for adults and teens. The maximum load capacity is 330 pounds.
3. Пакеттин мазмуну
Upon unboxing your MEEPO Campus V5 Series/Envy Electric Skateboard, please verify that all the following items are included:
- MEEPO Campus V5 Series/Envy Electric Skateboard (NLS3)
- Алыстан башкаруу
- Заряддагыч
- T-Tool (for adjustments)
- Spare Belts (245mm)
- USB Charging Cable for Remote
- Колдонуучунун Колдонмосу (бул документ)
2-сүрөт: Камтылган компоненттер
4. Орнотуу жана чогултуу
4.1 Алгачкы текшерүү
Before your first ride, carefully inspect your skateboard for any signs of damage during shipping. Ensure all screws are tightened and wheels spin freely.
4.2 Батареяны заряддоо
- Connect the charger to the charging port on the skateboard.
- Заряддагычты стандарттуу розеткага сайыңыз.
- The indicator light on the charger will change (e.g., red to green) when fully charged.
- Толук кубаттоо үчүн заряддоо убактысы болжол менен 2 саатты түзөт.
4.3 Алыстан башкарууну жупташтыруу
Your remote control should be pre-paired. If re-pairing is needed, refer to the specific instructions in the separate remote control manual or the official Meepo webсайт.
4.4 Wheel and Belt Installation/Adjustment
The NLS3 model uses belts for power transmission. Periodically check the tension and condition of these belts. If replacement is necessary, follow the steps demonstrated in the video below. Ensure the wheel is securely fastened after any adjustments or replacements.
Video: How to replace 245mm belts for NLS 3. This video demonstrates the process of removing and installing the drive belts on the MEEPO NLS3 electric skateboard, including loosening and tightening the necessary screws and properly seating the new belt.
5. Operating Your Electric Skateboard
5.1 Баштоо
- Turn on the skateboard and the remote control.
- Ensure the remote is connected to the board (check remote display).
- Place one foot on the board, then push off with the other foot to gain initial momentum.
- Gently push the throttle on the remote to accelerate.
5.2 Алыстан башкаруу функциялары
The N5S Display Remote allows for precise control:
- Муунткуч: Push forward to accelerate, pull back to brake.
- Ылдамдык режимдери: Switch between different speed modes (e.g., Beginner, Eco, Pro) to match your skill level and riding environment.
- Дисплей: Shows current speed, battery level (board and remote), and distance traveled.
5.3 Ат минүү ыкмалары
- Турум: Find a comfortable stance with your feet positioned over the trucks for balance.
- Айлануу: Lean into turns, similar to a traditional skateboard or snowboard.
- Тормоздоо: Apply brakes smoothly to avoid sudden stops. Regenerative braking helps recharge the battery.
Figure 3: Proper Riding Stance
6. Техникалык тейлөө
Regular maintenance ensures the longevity and performance of your electric skateboard.
6.1 Батареяга кам көрүү
- Charge the battery fully after each use, especially if storing for extended periods.
- Батареяны ашыкча заряддабаңыз же толугу менен сарптабаңыз.
- Тактаны салкын, кургак жерде, күндүн түз нурунан жана өтө жогорку температурадан алыс сактаңыз.
6.2 Тазалоо жана сактоо
- Тактаны жарнама менен сүртүңүзamp Ар бир сапардан кийин кирди жана таштандыларды кетирүү үчүн кездеме сүртүңүз.
- Avoid using harsh chemicals or excessive water, especially near electronic components.
- Store the board indoors in a dry environment.
6.3 Belt and Wheel Maintenance
- Regularly inspect drive belts for wear, cracks, or damage. Replace them as needed (refer to Section 4.4).
- Check wheels for cuts, cracks, or excessive wear.
- Ensure wheel nuts are tightened to prevent wobbling.
- Clean bearings periodically to maintain smooth wheel rotation.
Figure 4: Wheel and Motor Assembly
7. Кыйынчылыктарды
If you encounter issues with your MEEPO electric skateboard, refer to the table below for common problems and solutions.
| Көйгөй | Мүмкүн себеп | Чечим |
|---|---|---|
| Board not turning on | Батареянын аздыгы; Кубат баскычы туура басылган жок | Charge the board; Press and hold the power button firmly |
| Пульт туташпай жатат | Remote battery low; Not paired; Interference | Charge remote; Re-pair remote (refer to remote manual); Move away from interference sources |
| Loss of power during ride | Low board battery; Overheating; Loose connection | Charge board; Allow board to cool down; Check all connections |
| Unusual noises from wheels/motors | Debris in motor/belt; Worn bearings; Loose components | Clean motors/belts; Replace bearings; Tighten all screws |
| Кыскартылган диапазон | Battery degradation; Riding style; Terrain | Ensure full charge; Ride in Eco mode; Avoid steep hills or aggressive acceleration |
8. Техникалык шарттар
Key technical specifications for the MEEPO Campus V5 Series/Envy Electric Skateboard (NLS3):
| Өзгөчөлүк | Спецификация |
|---|---|
| Бренд | Meepo |
| Модель аты | MB0094 (NLS3) |
| Эң жогорку ылдамдык | Up to 29 Mph (47 km/h) / 32 Mph (52 km/h) |
| Макс диапазон | 24 миляга чейин (38 км) |
| Батарея | 12S2P MolicelP42A, 362WH (8.4AH) |
| Заряддоо убактысы | Approx. 2 hours (with 4.5A fast charging) |
| Моторлор | 2 x 2519W (HB-4240) |
| ESC | Hobbywing ESC (HB-9028-36A) |
| Палубанын материалы | Pure Bamboo + Fiberglass (8 Ply) |
| Палубанын узундугу | 38.9 дюйм (980мм) |
| Палубанын кеңдиги | 12.2 дюйм (254мм) |
| Элемент Салмагы | 9.7 килограмм |
| Жүктөө жөндөмдүүлүгү | 330 фунт |
| Wheel Size | 90 миллиметр |
| Жүк ташуучу унаалар | 8-inch RKP (Reverse Kingpin) |
| Суу каршылык | IPX5 (Splash resistant, not submersible) |
Figure 5: Skateboard Components and Performance Overview
9. Кепилдик жана колдоо
9.1 Кепилдик маалыматы
Your MEEPO Campus V5 Series/Envy Electric Skateboard comes with a limited warranty. Please refer to the official Meepo website or contact customer support for detailed warranty terms and conditions. The warranty period is typically 6 months from the date of purchase.
9.2 Кардарларды колдоо
For any questions, technical assistance, or warranty claims, please contact Meepo customer support:
- Официалдуу Webсайт: www.meepoboard.com
- Электрондук почта: info@meepoboard.com
- Жандуу чат: Available on the official webсайт.
- Дарек: G/f Hang Wai Indctmo 6 Kin Tai St Tuen Mun Nt Hong Kong
Meepo is committed to providing high-quality products and excellent customer service. Your satisfaction is our priority.
